Espectrómetro de masas de triple cuadrupolo TSQ Quantis™
Espectrómetro de masas de triple cuadrupolo TSQ Quantis™
Espectrómetro de masas de triple cuadrupolo TSQ Quantis™
Espectrómetro de masas de triple cuadrupolo TSQ Quantis™
Espectrómetro de masas de triple cuadrupolo TSQ Quantis™
Espectrómetro de masas de triple cuadrupolo TSQ Quantis™
Thermo Scientific™

Espectrómetro de masas de triple cuadrupolo TSQ Quantis™

Realice flujos de trabajo de cuantificación selectiva sólidos con la mejor sensibilidad de su clase para todos los tipos de moléculas y niveles de experiencia del usuario.

Have Questions?
Número de catálogo TSQ02-10001
Precio (MXN)
-

Responda fácilmente a los retos analíticos críticos durante los flujos de trabajo de cuantificación selectiva en su laboratorio. Con sus cuadrupolos segmentados, accionadores de barras más rápidos y los multiplicadores de electrones mejorados, el espectrómetro de masas de triple cuadrupolo Thermo Scientific™ TSQ Quantis™ ofrece una solidez sin precedentes con la mejor sensibilidad de su clase para el uso diario y para todos los usuarios.

El MS TSQ Quantis se integra a la perfección en el software de cuantificación líder del sector, en HPLC y UHPLC, así como en soluciones de preparación de muestras; también ofrece una mayor eficiencia durante los flujos de trabajo de cuantificación selectiva en una amplia gama de especies moleculares. Entre el resto de ventajas se incluyen:

  • Excelente sensibilidad que genera datos para todas las especies moleculares, incluso en matrices complejas.
  • Excelente solidez que permite aumentar la confianza en los datos y al mismo tiempo prolongar el tiempo de actividad del instrumento.
  • La fiabilidad y la reproducibilidad mejoran la calidad de los datos en cada ciclo y muestra.
  • La estrecha integración con el software específico de la aplicación garantiza una mayor productividad en todos los mercados de aplicaciones.
  • La simplicidad y la facilidad de uso permiten a los usuarios de todos los niveles de experiencia adquirir datos de alta calidad con una mayor confianza en los resultados.
Especificaciones
Para utilizar con (aplicación)Farmacéutica, medioambiental, seguridad alimentaria, investigación clínica y toxicología forense
Intervalo de masasDe 5 a 3000 m/z
TipoLC-MS de triple cuadrupolo
Unit SizeEach

Preguntas frecuentes

How do I clean/store my Triple Quadrupole mass spectrometry instruments after analysis?

For short periods (less than 24 hr) the system can just be put into standby. However, it is good practice to flush the system with 50:50 solvent/water (where the solvent is either methanol or acetonitrile) to remove buffers or additives and stop microbial growth.

For longer periods, flush the LC system with 50:50 solvent/water. Then flush with 100% solvent. Put the system into standby.

Find additional tips, troubleshooting help, and resources within our Mass Spectrometry Support Center.

How do I perform mass calibration on Triple Quadrupole mass spectrometry instruments and how often should I do it?

The mass calibration should ideally be performed every 3 months and definitely performed at least every 6 months. Refer to the Instrument Manual (https://tools.thermofisher.com/content/sfs/manuals/TSQ-Series-Hardware.pdf) for detailed instructions on how to perform mass calibration.

Find additional tips, troubleshooting help, and resources within our Mass Spectrometry Support Center.

How should I clean the Ion Transfer Tube on Triple Quadrupole mass spectrometry instruments?

The Ion Transfer Tube should be removed and sonicated in a 50:50 solution of methanol/water that contains 20% formic acid for 30 min. Rinse thoroughly with water. Then sonicate in methanol for 15 min. Dry with nitrogen gas.

The same procedure can be applied to the Ion Sweep Cone.

Refer to the Instrument Manual (https://tools.thermofisher.com/content/sfs/manuals/TSQ-Series-Hardware.pdf) for more detailed instructions.

Find additional tips, troubleshooting help, and resources within our Mass Spectrometry Support Center.

How should I adjust my ion source position on Triple Quadrupole mass spectrometry instruments?

Perform loop injections of your analyte using isocractic elution through a short column at the flow rate and approximate mobile phase composition. Use a concentration where the signal to noise is approximately 10:1. Record the raw data file and integrate the peaks, comparing peak areas at different source positions (i.e., left and right, up and down, fore and aft). Ensure that the background noise is not increasing more than the peak area.

Note: The needle position on the Thermo Fisher Scientific TSQ Altis MS, TSQ Quantis MS, and TSQ Fortis MS instruments is set and should not be adjusted.

Find additional tips, troubleshooting help, and resources within our Mass Spectrometry Support Center.

Do I need to warm/equilibrate Triple Quadrupole mass spectrometry instruments prior to starting a session of analysis?

It is advisable to turn both the LC system and the MS system on for at least 30 min prior to analysis. This time can usually be spent testing one or more solvents or matrix blanks.

Find additional tips, troubleshooting help, and resources within our Mass Spectrometry Support Center.