Shop All Gel Boxes, Gel Imagers, Power Supplies & Accessories

iBind™ Flex Cards (Invitrogen™)

iBind Flex Cards are used with the iBind Flex Western Device, which is an automated western-processing device that performs every step in the western workflow from blocking to washes to antibody incubations. Each solution is released from the iBind Flex device wells to the iBind Flex Card through sequential lateral flow (SLF); the solutions are then wicked towards the stack region of the card. The glass fiber matrix of the card allows for homogenous and consistent flow of the solutions to the membrane, increasing the antigen-antibody interaction.

Features include:
• Unique, proprietary, glass-fiber matrix allowing optimal and homogenous flow of immunodetection solutions
• Long shelf life—store iBind Flex Cards for 12 months at room temperature
• Better antigen-antibody interaction—solutions flow between the iBind Flex Card and membrane for maximum interaction between protein and antibody

The iBind Flex Cards, together with the iBind Flex Western Device and iBind Flex Solution Kit or iBind Flex Fluorescent Detection (FD) Solution Kit, bring automation and simplicity to your western protocol. Each iBind Flex Card can process up to one midi blot, two mini blots, or six vertically-cut strip blots.

Learn more about the iBind western systems ›

Owl™ Accessories for CST Multiple Gradient Gel Casters (Thermo Scientific™)

Choose between stainless-steel clamps or binder clamps from Thermo Scientific™ Owl™ Accessories for CST Multiple Gradient Gel Casters.

E-Gel™ Power Snap Electrophoresis System Starter Kit, EX 1% (Invitrogen™)

The Invitrogen E-Gel Power Snap Electrophoresis System Starter Kit, EX 1%, provides everything you need to quickly start using precast E-Gel EX 1% agarose gels on the system for a streamlined gel electrophoresis and gel imaging workflow.

The kit includes:
• 10 E-Gel EX agarose gels, 1% (Cat. No. G401001)
• E-Gel Power Snap Electrophoresis System (Cat. No. G8300)
• E-Gel 1 Kb Plus Express DNA Ladder with E-Gel Sample Loading Buffer (1X) (Cat. No. 10488091)
• Gel opening knife (Cat. No. EI9010)

Learn more about the E-Gel Power Snap Electrophoresis System ›

Learn more about precast E-Gel EX agarose gel technology ›

Owl™ S3S System Combs (Thermo Scientific™)

Eliminate comb assembly with these heavy-duty, one-piece combs.

Owl™ P8-Series System Combs (Thermo Scientific™)

Eliminate comb assembly with this assortment of heavy-duty, one-piece combs.

P1-CST Multiple Gradient Gel Caster, 10 teeth (Thermo Scientific™)

Cast one to five gels simultaneously with Fisherbrand™ P1-CST Multiple Gradient Gel Caster, one of the simplest devices to cast gradient gels.

E-Gel™ Power Snap Electrophoresis System Starter Kit, EX 2% (Invitrogen™)

The Invitrogen E-Gel Power Snap Electrophoresis System Starter Kit, EX 2%, provides everything you need to quickly start using precast E-Gel EX 2% agarose gels on the system for a streamlined gel electrophoresis and gel imaging workflow.

The kit includes:
• 10 E-Gel EX agarose gels, 2% (Cat. No. G401002)
• E-Gel Power Snap Electrophoresis System (Cat. No. G8300)
• E-Gel 50 bp DNA Ladder with E-Gel Sample Loading Buffer (1X) (Cat. No. 10488099)
• Gel opening knife (Cat. No. EI9010)

Learn more about the E-Gel Power Snap Electrophoresis System ›

Learn more about precast E-Gel EX agarose gel technology ›

Chemiluminescence Exposure Screen for myECL™ Imager (Thermo Scientific™)

This Thermo Scientific black plastic sample screen is used to cover the transilluminator on the myECL Imager. It is a replacement for the accessory used on the transilluminator for acquiring chemiluminescent images. Measurements: 24.5 cm x 19.5 cm x 3.2mm.

More Product Data
Improved Western blot detection using CCD digital imaging

Related Products
myECL™ Imager

PowerEase™ 90W Power Supply (115 VAC)

The PowerEase® 90W Power Supply is designed specifically for mini-gel electrophoresis. The straight-forward, intuitive interface makes the powering of DNA and protein gel runs a simple and easy process.

In addition, the PowerEase® 90W Power Supply features:

• Constant voltage or current settings
• Built-in timer for walk-away gel electrophoresis
• Four sets of output jacks that are compatible with most electrophoresis devices

Easy to Use
With the PowerEase® 90W Power Supply, simply set a constant voltage or current to begin a run. This power supply easily accommodates the running and transferring of 2 mini-gels, such as Bolt® Bis-Tris Plus gels or 2 midi-gels using the XCell4 SureLock™ Midi-Cell.

Mini Gel Tank Lid

The Mini Gel Tank Lid is a replacement part for the Mini Gel Tank. It goes on top of the Gel Runner Tank.

About the Mini Gel Tank
The Mini Gel Tank is compatible with a variety of Novex® gels, NuPAGE® gels, and Bolt® Bis-Tris Plus gels. Each Mini Gel Tank can accommodate up to two gels per run. The unique tank design enables convenient side-by-side gel loading and enhanced viewing during use. Optimized conditions using constant voltage allow for Bolt® Bis-Tris Plus gels to be run in approximately 35 minutes. Run times may vary depending on buffer conditions and power supplies being used.

E-Gel™ Power Snap Electrophoresis Device Starter Kit, SYBR Safe 2% (Invitrogen™)

The Invitrogen E-Gel Power Snap Electrophoresis Device Starter Kit, SYBR Safe 2%, provides everything you need to quickly start using precast 2% E-Gel agarose gels with SYBR Safe on the device.

The kit includes:
• 18 E-Gel agarose gels with SYBR Safe, 2% (Cat. No. G521802)
• E-Gel Power Snap Electrophoresis Device (Cat. No. G8100)
• E-Gel 50 bp DNA Ladder with E-Gel Sample Loading Buffer (1X) (Cat. No. 10488099)

Learn more about the E-Gel Power Snap Electrophoresis Device ›

Learn more about precast E-Gel EX agarose gel technology ›

Owl™ P7-CST Multiple Gradient Gel Caster (Thermo Scientific™)

Cast one to five gels simultaneously with the Thermo Scientific™ Owl™ P7-CST Multiple Gradient Gel Caster.

UV Transilluminator Bulb, 365 nm, for myECL™ Imager (Thermo Scientific™)

This lamp bulb with ultraviolet emission (365nm) is used to replace the pre-installed 306nm UV bulbs in the Thermo Scientific myECL Imager with long-wave 365nm bulbs; all six lamps must be the same bulb type (365nm or 306nm).

More Product Data
Improved Western blot detection using CCD digital imaging

Related Products
myECL™ Imager

A2 and A5 Large Gel System Replacement End Gates (Thermo Scientific™)

Use these gasketed UVT gel trays, replacement gaskets and end gates with Fisherbrand™ A2 and A5 Large Gel Systems.

PowerEase™ 300W Power Supply (230 VAC) (Australia)

The PowerEase® 300W Power Supply is a fully programmable power supply designed for high-throughput gel electrophoresis. The straight-forward, intuitive interface makes the powering of gel runs a simple and easy process.

In addition, the PowerEase® 300W Power Supply features:

• Constant voltage, current, or power settings
• Built-in timer for walk-away gel electrophoresis
• Up to 10 custom programs with 10 steps each
• Four sets of output jacks that are compatible with most electrophoresis devices

Easy to Use
With the PowerEase® 300W Power Supply, simply set a constant voltage, current, or power to begin a run. This power supply easily accommodates the running and transferring of 8 mini-gels, such as Bolt® Bis-Tris Plus gels, or 16 midi-gels using the XCell4 SureLock™ Midi-Cell.

Programming Capabilities
The PowerEase® 300W Power Supply accommodates up to 10 user-defined programs for your most common electrophoresis runs. Each program can include up to 10 steps, for precise control over the electrophoresis conditions.