Shop All Air Quality & Water Analysis Instruments & Equipment

Mercury Freedom System Thermo Scientific™

Measure elemental, ionic and total mercury in exhaust stacks from coal-fired boilers and waste incinerators with the Thermo Scientific™ Mercury Freedom System. Meet or exceed performance specifications outlined in U.S. EPA PS-12A and/or Part 75 provisions for continuous Mercury CEM systems in addition to the latest MATS and MACT rules.

Model 290 Marple Personal Cascade Impactor Thermo Scientific™

This product has been discontinued however we continue to provide services and support for this product.

Complete Outdoor Enclosure of Beta and SHARP Monitors Thermo Scientific™

Protect your Beta or SHARP monitor from extreme climates with a Thermo Scientific™ Complete Outdoor Enclosure. This enclosure offers full weather protection for Thermo Scientific™ Model 5014i Beta Monitor or the Model 5030i SHARP Monitor, and is a cost-effective alternative to permanent shelters.

Orion™ AQUAfast™ AQ4000 Colorimeter and Accessories Thermo Scientific™

Measure common colorimetric water and wastewater parameters using the Thermo Scientific™ Orion™ AQUAfast AQ4000 Colorimeter with 65 preprogrammed methods, automatic selection of four wavelengths and timer. Use Auto-Test ampoules with Auto-ID barcodes to simplify sample preparation and tests – ampoules contain pre-measured liquid reagent and fill with the exact volume of sample, colorimeter reads the barcode and automatically identifies the parameter and initiates the test. This IP67 waterproof meter records 100 data points and offers an average battery life of 2500 hours intermittent use.

Model 42i (NO-NO2-NOx) Analyzer Thermo Scientific™

Measure levels of nitrogen oxide (NO-NO2-NOx) in the emissions from a source using chemiluminescent technology with the Thermo Scientific™ Model 42i NO-NO2-NOx Analyzer.

Discover the iQ to work smarter with our next generation 42iQ NO-NO2-NOx Analyzer.

410iQ High Level Carbon Dioxide Gas Analyzer

Get 24/7 access to your analyzer’s information with a Thermo Scientific™ iQ Series Gas Analyzer. The iQ Series Gas Analyzers are engineered to get smarter over time and help minimize troubleshooting time with a highly precise, yet tough solution. The Thermo Scientific™ 410iQ High Level Carbon Dioxide Gas Analyzer provides the same level of performance when measuring high levels of carbon dioxide (CO2) concentration in emissions using advanced NDIR optical filter technology.

Recording Balance D Thermo Scientific™

The Recording Balance D has been discontinued, however we continue to provide services and support for this product.

Please see below for available services and support for the Recording Balance D.

Orion™ AquaMate 7000 Vis Spectrophotometer Thermo Scientific™

Choose the accuracy, dependability and ease of use of the Thermo Scientific™ Orion™ AquaMate 7000 Vis Spectrophotometer to optimize your water and wastewater testing. This dependable lab spectrophotometer includes 260 preprogrammed methods for ion concentration from absorbance or create custom methods using the standard curve function so virtually any brand of colorimetric reagent can be used. Utilize 325-1100 nm selectable wavelengths, 5 nm spectral bandwidth and vial size flexibility with the included 3-position carousel to hold 13-24 mm round, 10 mm square and 20-50 mm rectangular vials.

Orion™ AquaMate™ Power Cords Thermo Scientific™

Use Thermo Scientific™ Orion™ AquaMate Power Cords with AquaMate 8000 UV-Vis and AquaMate 7000 Vis spectrophotometers. Select power cords with a US / Japan plug, Euro plug, UK / Singapore plug or China / Australia / New Zealand plug.

Model 42i-D NOx Analyzer Thermo Scientific™

Measure the amount of nitrogen oxides in the air from sub-ppm levels up to 100ppm using chemiluminescence with the Thermo Scientific™ Model 42i-D NOx Analyzer. The Model 42i-D is a single chamber, single photomultiplier tube design that measures NOx only.

Discover the iQ to work smarter with our next generation 42iQD NOx Analyzer.

Replacement Power Cords & Cables for AQ7100 and AQ8100 Spectrophotometers Thermo Scientific™

Engineered specifically for Thermo Scientific™ Orion™ AquaMate Vis and UV-Vis spectrophotometers using factory qualified replacement cords, power supplies and cables insure safe, reliable operation.

Personal DataRAM™ Accessories Thermo Scientific™

Enhance functionality and performance using Thermo Scientific™ personal DataRAM Accessories. Available for conversion to passive sampling, from passive sampling or to active sampling.

Eight-Stage Non-Viable Andersen Cascade Impactor Thermo Scientific™

This product has been discontinued however we continue to provide services and support for this product.

Model 42i-HL High Level NO-NO2-NOx Analyzer Thermo Scientific™

Measure high levels of nitrogen oxides in the air using chemiluminescence with the Thermo Scientific™ Model 42i-HL NO-NO2NOx Analyzer. The Model 42i-HL is a single chamber, single photomultiplier tube design that cycles between NO and NOx modes, and can be operated continuously in either NO or NO x modes allowing for response time of less than 5 seconds.

Discover the iQ to work smarter with our next generation 42iQ High Level NO-NO2-NOx Analyzer.

Model 4200 BS and W Probes Thermo Scientific™

Thermo Scientific™ Model 4200 BS and W Probes have been discontinued; however, we continue to provide services and support for this product.
As of June 30, 2010
, this instrument has been retired and we can no longer guarantee the availability of spare parts. Parts and service support will be provided as possible.
Results per page
    spinner