Shop All Chromatography Instruments & Equipment
Dionex™ ASE™ 150 Accelerated Solvent Extractor Thermo Scientific™
Dionex™ ASE™ 350 Accelerated Solvent Extractor Thermo Scientific™
Buffer Tubing for UltiMate™ 3000 Autosamplers, Biocompatible Thermo Scientific™
Dionex™ AutoTrace™ 280 Solid-Phase Extraction Instrument Thermo Scientific™
Extract analytes of interest from large volume aqueous samples easily and efficiently with the Thermo Scientific™ Dionex™ AutoTrace™ 280 Solid-Phase Extraction (SPE) Instrument. The AutoTrace 280 automates all four steps of SPE (conditioning, loading, rinsing, and eluting), reducing solvent consumption and improving recovery and reproducibility. Boost productivity and reduce cost of analysis by simultaneously processing up to six samples in 2-3 hours with only 15 minutes of operator involvement. The AutoTrace 280 meets requirements in US EPA methods including the 500 and 600 series.
pH Gradient Buffers Thermo Scientific™
Obtain fast and highly robust, reproducible HPLC gradients using Thermo Scientific™ CX-1 pH Gradient Buffers. Simple to optimize and easily automated, these buffers are applicable for HPLC separation of the majority of monoclonal antibody (mAb) biotherapeutics drugs. CX-1 pH Gradient Buffers are ready to use with existing HPLC columns without the need to formulate mobile phases. The CX-1 buffers save time in method development, facilitate method transfer to QA/QC for a wide range of mAb charge variants through a generic HPLC-based approach to mAb characterization, and do not require time-consuming mobile phase adjustments.
250µL Syringe Upgrade Kits Thermo Scientific™
Choose Thermo Scientific™ Dionex™ Syringe Upgrade Kit for 250µL syringe includes syringe, needle, buffer tubing, and sample loop (125µL) for the WPS-3000TBPL Nano/Cap autosampler.
Rheodyne™ Ports for Injector Models 7010 and 9010 Thermo Scientific™
Use Thermo Scientific™ Rheodyne Ports for Models 7010 and 9010 Injectors for high-performance liquid chromatography (HPLC).
UltiMate™ 3000 Pump Pistons Thermo Scientific™
Injection Port Liners for Agilent GC Instruments Thermo Scientific™
Optimize the performance of Agilent™ GC systems with our specifically designed Thermo Scientific™ Injection Port Liners for Agilent instruments. Highly deactivated and produced to exacting tolerances, these injection liners ensure exceptional reproducibility.
HyperSep™ C18 Plates Thermo Scientific™
PEEK Biocompatible Sample Loops for Pulled Loop Autosamplers Thermo Scientific™
SLIPFREE™ HPLC Column Single Connectors Thermo Scientific™
Dionex™ Viper™ Extension Kit for UltiMate™ 3000 Quaternary SD/RS AMS Setup Thermo Scientific™
Thermo Scientific™ Dionex Viper Capillary Kits for Analytical System Variants feature built-in zero dead volume by sealing at the tip of the tubing.
nanoViper™ Fingertight Fittings, 100µm Thermo Scientific™
Maximize nano liquid chromatography (LC) performance and convenience with Thermo Scientific™ nanoViper™ Fingertight Fittings. Virtually zero-dead-volume connections ensure optimal separation efficiencies. Preassembled and finger-tightened, nanoViper fingertight fittings enable easy, tool-free instrument setup and configuration, and prevent overtightening. High pressure tested, these fittings provide UHPLC compatibility up to 1200 bar (17,400 psi).
Dionex™ ICS-6000 Standard Bore and Microbore HPIC™ Systems Thermo Scientific™
Get significant increases in resolution and throughput using the world's first modular ion chromatography (IC) system capable of operation up to 5000 psi. The Thermo Scientific™ Dionex™ ICS-6000 Standard Bore and Microbore System can operate continuously at up to 5000 psi when configured as a Reagent-Free™ IC (RFIC™) system. Get higher resolution using smaller particle size (4µm) columns, faster run times without sacrificing needed resolution using higher flow rates and 150mm columns, or higher resolution with standard flow rates and 250mm columns. The ability to configure this flexible, modular system for an unmatched variety of applications.