Shop All Protein Labeling Kits

Alexa Fluor™ 555 Protein Labeling Kit (Invitrogen™)

Molecular Probes® Protein Labeling Kits provide a convenient means for attaching a fluorescent label (or biotin) to an antibody (or a protein larger than 40 kDa). Conjugates are ideal for multiple applications, including flow cytometry, fluorescent microscopy, immunohistochemistry, primary detection, ELISAs, immunocytochemistry, FISH, and more. Kits are available in 12 Alexa Fluor® dye colors, biotin, the hapten Oregon Green® 488, fluorescein EX, and Texas Red® dye. Each kit provides the components needed to perform three protein conjugations and purifications.

Important Features of Protein Labeling Kits:

• Labeled proteins typically ready to use in 2 hr (~30 min hands-on time)
• Designed to label 1 mg of IgG
• Simple protocol—react, separate, use
• Stabilizing proteins must be removed from the sample before labeling


The Benefits of Alexa Fluor® Dyes
Compared to traditional dyes, Alexa Fluor® dyes are brighter, more photostable, and more pH resistant between pH 4 and 10. And generally when using Alexa Fluor® dyes, higher degrees of labeling can be achieved without intramolecular quenching. For details see Alexa Fluor® Dyes Spanning the Visible and Infrared Spectrum—Section 1.3.

Learn More About Protein and Antibody Labeling
We offer a wide selection of Molecular Probes® antibody and protein labeling kits to fit your starting material and your experimental setup. See Antibody Labeling from A to Z or use our Labeling Chemistry Selection Tool for other choices. To learn more about our various kits read Kits for Labeling Proteins and Nucleic Acids—Section 1.2 in the Molecular Probes® Handbook.

We’ll Make a Custom Antibody Conjugate for You
If you can’t find what you’re looking for in our stocked list, we’ll prepare a custom antibody conjugate for you. Our custom conjugation service is efficient and confidential, and we stand by the quality of our work. We are ISO 9001:2000 certified.

For Research Use Only. Not intended for animal or human therapeutic or diagnostic use.

FluoReporter™ FITC Protein Labeling Kit (Invitrogen™)

The FluoReporter® FITC Protein Labeling Kit provides a convenient and flexible means for attaching fluorescein (FITC, Ex/Em ~494/518 nm) to your monoclonal or polyclonal antibody (or any protein >30 kDa). The kit supplies the reagents needed for 5 to 10 labeling and separation reactions.

Important Features of the FluoReporter® FITC Protein Labeling Kit:

• Labeled proteins typically ready to use in under 3 hours with very little hands-on time
• Optimized for 0.2–2.0 mg of protein with molecular weight >30 kDa
• Labeled proteins are purified using convenient spin filters
• Requires the antibody or protein be purified prior to labeling


Learn More About Protein Labeling
We offer a wide selection of Molecular Probes® protein and antibody labeling kits to fit your starting material and your experimental setup. See Antibody Labeling from A to Z or use our Labeling Chemistry Selection Tool for other choices. To learn more about our various kits read Kits for Labeling Proteins and Nucleic Acids—Section 1.2 in the Molecular Probes® Handbook.

We’ll Make a Custom Labeled Protein for You
If you can’t find what you’re looking for in our stocked list, we’ll prepare a custom labeled protein for you. Our custom services are efficient and confidential, and we stand by the quality of our work. We are ISO 9001:2000 certified.

For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.

Texas Red™-X Protein Labeling Kit (Invitrogen™)

Molecular Probes® Protein Labeling Kits provide a convenient means for attaching a fluorescent label (or biotin) to an antibody (or a protein larger than 40 kDa). Conjugates are ideal for multiple applications, including flow cytometry, fluorescent microscopy, immunohistochemistry, primary detection, ELISAs, immunocytochemistry, FISH, and more. Kits are available in 12 Alexa Fluor® dye colors, biotin, the hapten Oregon Green® 488, fluorescein EX, and Texas Red® dye. Each kit provides the components needed to perform three protein conjugations and purifications.

Important Features of Protein Labeling Kits:

• Labeled proteins typically ready to use in 2 hr (~30 min hands-on time)
• Designed to label 1 mg of IgG
• Simple protocol—react, separate, use
• Stabilizing proteins must be removed from the sample before labeling


The Benefits of Alexa Fluor® Dyes
Compared to traditional dyes, Alexa Fluor® dyes are brighter, more photostable, and more pH resistant between pH 4 and 10. And generally when using Alexa Fluor® dyes, higher degrees of labeling can be achieved without intramolecular quenching. For details see Alexa Fluor® Dyes Spanning the Visible and Infrared Spectrum—Section 1.3.

Learn More About Protein and Antibody Labeling
We offer a wide selection of Molecular Probes® antibody and protein labeling kits to fit your starting material and your experimental setup. See Antibody Labeling from A to Z or use our Labeling Chemistry Selection Tool for other choices. To learn more about our various kits read Kits for Labeling Proteins and Nucleic Acids—Section 1.2 in the Molecular Probes® Handbook.

We’ll Make a Custom Antibody Conjugate for You
If you can’t find what you’re looking for in our stocked list, we’ll prepare a custom antibody conjugate for you. Our custom conjugation service is efficient and confidential, and we stand by the quality of our work. We are ISO 9001:2000 certified.

For Research Use Only. Not intended for animal or human therapeutic or diagnostic use.

SAIVI™ Alexa Fluor™ 647 Antibody/Protein 1 mg-Labeling Kit (Invitrogen™)

The SAIVI Alexa Fluor® 647 Antibody/Protein 1 mg-Labeling Kit provides a convenient means to label proteins with Alexa Fluor® 647 near-IR emitting dye. The kit is optimized for labeling and purifying 1 mg of IgG per conjugation reaction; comparable amounts of other proteins (>30 kDa) can also be labeled. To conveniently control the degree of labeling (DOL), this kit includes a DOL modulating reagent and instructions for decreasing the DOL from its intrinsic highest value. Using this method, protein preparations with varying ratios of dye to protein can be quickly and reproducibly obtained, allowing more efficient optimization in applications such as in vivo imaging, where the DOL of a protein can have significant effects on the signal-to-background ratio, biodistribution, and clearance.

Click-IT™ Alexa Fluor™ 594 DIBO Alkyne, for copper free click chemistry detection of azide (Invitrogen™)

The fluorescent Alexa Fluor® 594 Dibo alkyne is reactive with azides via a copper-free "click chemistry" reaction.

Please consider this copper-free variation to our copper requiring alkynes if you are staining the surface of live cells or have concerns about native protein function loss with copper in cell extracts. Copper can damage fluorescent proteins, Quantum Dot nanocyrstals, certain enzymes and photoproteins like RPE. The DIBO reagent is not suitable for staining intracellular components of fixed and permeabilized cells due to high backgrounds.

EZ-Link™ Sulfo-NHS-Biotinylation Kit (Thermo Scientific™)

The Thermo Scientific EZ-Link Sulfo-NHS-Biotinylation Kit contains reagents sufficient for 10 biotinylation reactions (e.g., 1–10 mg antibody per reaction). The EZ-Link Sulfo-NHS-Biotin reagent included in the kit is a short-chain, water-soluble biotinylation reagent used for labeling antibodies, proteins and other molecules that have primary amines.

Features of EZ-Link Sulfo-NHS-Biotin:

Protein labeling—biotinylate antibodies to facilitate immobilization, purification or detection using streptavidin resins or probes
Cell surface labeling—biotinylates only surface proteins of whole cells because the negatively charged reagent does not permeate cell membranes
Amine-reactive—reacts with primary amines (-NH2), such as lysine side-chains or the amino-termini of polypeptides
Soluble—charged sulfo-NHS group increases reagent water solubility compared to ordinary NHS-ester compounds
Irreversible—forms permanent amide bonds; spacer arm cannot be cleaved
Very short—spacer arm (total length added to target) is 13.5 angstroms; it consists of the native biotin valeric acid group only.

Sulfo-NHS-Biotin is the shortest of three very similar EZ-Link Reagents that are water-soluble, non-cleavable, and enable simple and efficient biotinylation of antibodies, proteins and any other primary amine-containing macromolecules in solution. Specific labeling of cell surface proteins is another common application for these uniquely water-soluble and membrane impermeable reagents. Differing only in their spacer arm lengths, the three Sulfo-NHS-ester reagents offer the possibility of optimizing labeling and detection experiments where steric hindrance of biotin binding is an important factor. Sulfo-NHS-Biotin is offered in several package sizes and as complete protein labeling kits.

We manufacture biotin reagents to ensure the highest possible overall product integrity, consistency and performance for the intended research applications.

N-Hydroxysulfosuccinimide (NHS) esters of biotin are the most popular type of biotinylation reagent. NHS-activated biotins react efficiently with primary amino groups (-NH2) in alkaline buffers to form stable amide bonds. Proteins (e.g., antibodies) typically have several primary amines that are available as targets for labeling, including the side chain of lysine (K) residues and the N-terminus of each polypeptide.

Varieties of biotin NHS-ester reagents differ in length, solubility, cell permeability and cleavability. Non-sulfonated NHS-biotins are cell permeable but must be dissolved in organic solvent such as DMSO or DMF. Sulfo-NHS biotins (and those with pegylated spacers) are directly water soluble but not membrane permeable. Varieties containing disulfide bonds can be cleaved using reducing agents, enabling the biotin group to be disconnected from the labeled protein.

Related Products
EZ-Link™ Sulfo-NHS-Biotin
EZ-Link™ Micro Sulfo-NHS-Biotinylation Kit

Click-iT™ HPG Alexa Fluor™ 488 Protein Synthesis Assay Kit (Invitrogen™)

The Click-iT® HPG Alexa Fluor® 488 Protein Synthesis Assay Kit provides a fast, sensitive, non-toxic, and non-radioactive method for the detection of nascent protein synthesis utilizing fluorescence microscopy, high-content imaging, or flow cytometry. Included in the kit are L-homopropargylglycine (HPG), an amino acid analog of methionine containing an alkyne moiety, and Alexa Fluor® 488 azide. The HPG is fed to cultured cells and incorporated into proteins during active protein synthesis. Addition of the Alexa Fluor® 488 azide leads to a chemoselective ligation or "click" reaction between the green fluorescent azide and the alkyne, allowing the modified proteins to be detected by imaged-based analysis.

Non-radioactive alternative—an alternative to the traditional 35S-methionine
Visualize bulk protein dynamics—fluorescent tagging of proteins allows their localization to be determined, including aggregation
Specificity—selective, specific reaction between label and detection tags
Stability —product contains an irreversible, covalent bond
Multiplex-enabled—use in conjuction with Click®-iT AHA (azide amino acid and alkyne dye) to detect spatial and temporal differences
Applicability to biological samples—easy detection; high sensitivity and low background, regardless of complexity

The Click-iT® HPG Alexa Fluor® 488 Protein Synthesis Assay Kit has been successfully tested in HeLa, A549, and U-2 OS cells with a variety of reagents that inhibit protein synthesis, including cycloheximide and anisomycin. The applicability of these probes to monitor protein degradation has also been shown using inhibitors of the proteasome (MG132 and Bortezomib) and blockers of autophagy (chloroquine) in HeLa cells.

Additionally, due to differences in Click-iT® chemistry between the Click-iT® HPG Alexa Fluor® 488 Protein Synthesis Assay Kit and Click®-iT AHA with Alexa Fluor® 594 Alkyne, these reagents can be used in conjunction for spatial or temporal determination of differences in nascent protein synthesis.

Alexa Fluor™ 488 Protein Labeling Kit (Invitrogen™)

Molecular Probes® Protein Labeling Kits provide a convenient means for attaching a fluorescent label (or biotin) to an antibody (or a protein larger than 40 kDa). Conjugates are ideal for multiple applications, including flow cytometry, fluorescent microscopy, immunohistochemistry, primary detection, ELISAs, immunocytochemistry, FISH, and more. Kits are available in 12 Alexa Fluor® dye colors, biotin, the hapten Oregon Green® 488, fluorescein EX, and Texas Red® dye. Each kit provides the components needed to perform three protein conjugations and purifications.

Important Features of Protein Labeling Kits:

• Labeled proteins typically ready to use in 2 hr (~30 min hands-on time)
• Designed to label 1 mg of IgG
• Simple protocol — react, separate, use
• Stabilizing proteins must be removed from the sample before labeling


The Benefits of Alexa Fluor® Dyes
Compared to traditional dyes, Alexa Fluor® dyes are brighter, more photostable, and more pH resistant between pH 4 and 10. And generally when using Alexa Fluor® dyes, higher degrees of labeling can be achieved without intramolecular quenching. For details see Alexa Fluor® Dyes Spanning the Visible and Infrared Spectrum—Section 1.3.

Learn More About Protein and Antibody Labeling
We offer a wide selection of Molecular Probes® antibody and protein labeling kits to fit your starting material and your experimental setup. See Antibody Labeling from A to Z or use our Labeling Chemistry Selection Tool for other choices. To learn more about our various kits read Kits for Labeling Proteins and Nucleic Acids—Section 1.2 in the Molecular Probes® Handbook.

We’ll Make a Custom Antibody Conjugate for You
If you can’t find what you’re looking for in our stocked list, we’ll prepare a custom antibody conjugate for you. Our custom conjugation service is efficient and confidential, and we stand by the quality of our work. We are ISO 9001:2000 certified.

For Research Use Only. Not intended for animal or human therapeutic or diagnostic use.

EZ-Link™ Sulfo-NHS-LC-Biotinylation Kit (Thermo Scientific™)

The Thermo Scientific EZ-Link Sulfo-NHS-LC-Biotinylation Kit contains reagents sufficient for 10 biotinylation reactions (e.g., 1–10 mg antibody per reaction). The EZ-Link Sulfo-NHS-LC-Biotin reagent included in the kit is an intermediate-length, water-soluble biotinylation reagent for labeling antibodies, proteins, and other molecules that have primary amines.

Features of EZ-Link Sulfo-NHS-LC-Biotin:

Protein labeling—biotinylate antibodies to facilitate immobilization, purification or detection using streptavidin resins or probes
Cell surface labeling—biotinylates only surface proteins of whole cells because the negatively charged reagent does not permeate cell membranes
Amine-reactive—reacts with primary amines (-NH2), such as lysine side-chains, or the amino-termini of polypeptides
Soluble—charged sulfo-NHS group increases reagent water solubility compared to ordinary NHS-ester compounds
Irreversible—forms permanent amide bonds; spacer arm cannot be cleaved
Medium length—spacer arm (total length added to target) is 22.4 angstroms; provides excellent balance between adequate length (minimal steric hindrance for biotin binding) and modest mass

Sulfo-NHS-LC-Biotin is one of three very similar EZ-Link Reagents that are water-soluble, non-cleavable, and enable simple and efficient biotinylation of antibodies, proteins and any other primary amine-containing macromolecules in solution. Specific labeling of cell surface proteins is another common application for these uniquely water-soluble and membrane impermeable reagents. Differing only in their spacer arm lengths, the three Sulfo-NHS-ester reagents offer the possibility of optimizing labeling and detection experiments where steric hindrance of biotin binding is an important factor. Sulfo-NHS-LC-Biotin is offered in several package sizes and as complete protein labeling kits.

We manufacture biotin reagents to ensure the highest possible overall product integrity, consistency, and performance for the intended research applications.

N-Hydroxysulfosuccinimide (NHS) esters of biotin are the most popular type of biotinylation reagent. NHS-activated biotins react efficiently with primary amino groups (-NH2) in alkaline buffers to form stable amide bonds. Proteins (e.g., antibodies) typically have several primary amines that are available as targets for labeling, including the side chain of lysine (K) residues and the N-terminus of each polypeptide.

Varieties of biotin NHS-ester reagents differ in length, solubility, cell permeability and cleavability. Non-sulfonated NHS-biotins are cell permeable but must be dissolved in organic solvent such as DMSO or DMF. Sulfo-NHS biotins (and those with pegylated spacers) are directly water soluble but not membrane permeable. Varieties containing disulfide bonds can be cleaved using reducing agents, enabling the biotin group to be disconnected from the labeled protein.

Related Products
EZ-Link™ Sulfo-NHS-LC-Biotin
EZ-Link™ Micro Sulfo-NHS-LC-Biotinylation Kit

Alexa Fluor™ 488 Microscale Protein Labeling Kit (Invitrogen™)

Microscale Protein Labeling Kits provide a convenient means for attaching a fluorescent label to a small amount of antibody or protein (20–100 μg). The kits are available in four Alexa Fluor® colors (or biotin) and supply everything needed for three labeling and separation reactions.

Important Features of Microscale Protein Labeling Kits:
• Labeled proteins typically ready to use typically in 2 hr (~30 min hands-on time)
• Optimized for 20–100 μg of protein with molecular weights between 12 and 150 kDa
• Purified using convenient spin filters with yields between 60 and 90%
• Stabilizing proteins must be removed from the sample before labeling


Stable Reaction Chemistry and Superior Alexa Fluor® Dyes
In the Microscale Protein Labeling Kits, the reactive dye contains a tetrafluorophenyl (TFP) ester moiety that is more stable in solution than the commonly used succinimidyl (NHS) ester. TFP esters react efficiently with primary amines of proteins to form stable dye–protein conjugates. Compared to traditional dyes, Alexa Fluor® dyes are brighter, more photostable, and more pH resistant between pH 4 and 10. And generally when using Alexa Fluor® dyes, higher degrees of labeling can be achieved without intramolecular quenching. For details see Alexa Fluor® Dyes Spanning the Visible and Infrared Spectrum—Section 1.3.

Learn More About Protein and Antibody Labeling
We offer a wide selection of Molecular Probes® antibody and protein labeling kits to fit your starting material and your experimental setup. See Antibody Labeling from A to Z or use our Labeling Chemistry Selection Tool for other choices. To learn more about our various kits read Kits for Labeling Proteins and Nucleic Acids—Section 1.2 in the Molecular Probes® Handbook.

We’ll Make a Custom Antibody Conjugate for You
If you can’t find what you’re looking for in our stocked list, we’ll prepare a custom antibody conjugate for you. Our custom conjugation service is efficient and confidential, and we stand by the quality of our work. We are ISO 9001:2000 certified.

For Research Use Only. Not intended for animal or human therapeutic or diagnostic use.

Alexa Fluor™ 350 Protein Labeling Kit (Invitrogen™)

Molecular Probes® Protein Labeling Kits provide a convenient means for attaching a fluorescent label (or biotin) to an antibody (or a protein larger than 40 kDa). Conjugates are ideal for multiple applications, including flow cytometry, fluorescent microscopy, immunohistochemistry, primary detection, ELISAs, immunocytochemistry, FISH, and more. Kits are available in 12 Alexa Fluor® dye colors, biotin, the hapten Oregon Green® 488, fluorescein EX, and Texas Red® dye. Each kit provides the components needed to perform three protein conjugations and purifications.

Important Features of Protein Labeling Kits:

• Labeled proteins typically ready to use in 2 hr (~30 min hands-on time)
• Designed to label 1 mg of IgG
• Simple protocol—react, separate, use
• Stabilizing proteins must be removed from the sample before labeling

The Benefits of Alexa Fluor® Dyes
Compared to traditional dyes, Alexa Fluor® dyes are brighter, more photostable, and more pH resistant between pH 4 and 10. And generally when using Alexa Fluor® dyes, higher degrees of labeling can be achieved without intramolecular quenching. For details see Alexa Fluor® Dyes Spanning the Visible and Infrared Spectrum—Section 1.3.

Learn More About Protein and Antibody Labeling
We offer a wide selection of Molecular Probes® antibody and protein labeling kits to fit your starting material and your experimental setup. See Antibody Labeling from A to Z or use our Labeling Chemistry Selection Tool for other choices. To learn more about our various kits read Kits for Labeling Proteins and Nucleic Acids—Section 1.2 in the Molecular Probes® Handbook.

We’ll Make a Custom Antibody Conjugate for You
If you can’t find what you’re looking for in our stocked list, we’ll prepare a custom antibody conjugate for you. Our custom conjugation service is efficient and confidential, and we stand by the quality of our work. We are ISO 9001:2000 certified.

For Research Use Only. Not intended for animal or human therapeutic or diagnostic use.

Alexa Fluor™ 660 Protein Labeling Kit (Invitrogen™)

Molecular Probes® Protein Labeling Kits provide a convenient means for attaching a fluorescent label (or biotin) to an antibody (or a protein larger than 40 kDa). Conjugates are ideal for multiple applications, including flow cytometry, fluorescent microscopy, immunohistochemistry, primary detection, ELISAs, immunocytochemistry, FISH, and more. Kits are available in 12 Alexa Fluor® dye colors, biotin, the hapten Oregon Green® 488, fluorescein EX, and Texas Red® dye. Each kit provides the components needed to perform three protein conjugations and purifications.

Important Features of Protein Labeling Kits:

• Labeled proteins typically ready to use in 2 hr (~30 min hands-on time)
• Designed to label 1 mg of IgG
• Simple protocol—react, separate, use
• Stabilizing proteins must be removed from the sample before labeling


The Benefits of Alexa Fluor® Dyes
Compared to traditional dyes, Alexa Fluor® dyes are brighter, more photostable, and more pH resistant between pH 4 and 10. And generally when using Alexa Fluor® dyes, higher degrees of labeling can be achieved without intramolecular quenching. For details see Alexa Fluor® Dyes Spanning the Visible and Infrared Spectrum—Section 1.3.

Learn More About Protein and Antibody Labeling
We offer a wide selection of Molecular Probes® antibody and protein labeling kits to fit your starting material and your experimental setup. See Antibody Labeling from A to Z or use our Labeling Chemistry Selection Tool for other choices. To learn more about our various kits read Kits for Labeling Proteins and Nucleic Acids—Section 1.2 in the Molecular Probes® Handbook.

We’ll Make a Custom Antibody Conjugate for You
If you can’t find what you’re looking for in our stocked list, we’ll prepare a custom antibody conjugate for you. Our custom conjugation service is efficient and confidential, and we stand by the quality of our work. We are ISO 9001:2000 certified.

For Research Use Only. Not intended for animal or human therapeutic or diagnostic use.

pHrodo™ Red Microscale Labeling Kit (Invitrogen™)

pHrodo® Red is the new name for pHrodo®, a fluorogenic dye that dramatically increases in fluorescence as the pH of its surroundings become more acidic. Original pHrodo® and pHrodo® Red dyes are the same molecule. Use this pHrodo® Red microscale protein labeling kits to conveniently label 3 separate samples of small amounts (20-100 µg) of purified protein or antibody with pHrodo®-SE conjugate.

pHrodo® Red dye conjugates are non-fluorescent outside the cell, but fluoresce bright red in phagosomes, making them ideal tools for studies ranging from phagocytosis of bioparticles to receptor internalization. pHrodo Red™ offers staining that is faster and more accurate than ratiometric dyes.

The pHrodo® Red Microscale Labeling Kit Is:
Convenient—Labeling typically takes 2 hours with less than 30 min hands-on
Versatile—Label proteins with MW between 12 and 150 kDa
Customizable—Create your own probes for studying phagocytosis and endocytosis

Get Better Results in Endocytosis Studies
Endocytosis and phagocytosis underly physiological events ranging from host-pathogen response to receptor desensitization via internalization (as is common in the GPCR class of receptors). Once internalized, material can be acidified in endosomes or lysosomes. When conjugated to target molecules, our pHrodo® Red dye fluorogenic pH sensitive probe allows direct visual monitoring of material entering these acidic compartments. At neutral and basic pH values, pHrodo® Red dye emission is at its minimum; with acidification, pHrodo® Red dye emission is increased by as much as 8-fold (at pH 4). The fluorescence of pHrodo® Red dye is dimmed by complete media and whole blood, further improving the signal-to-noise ratio. The pHrodo® Red Microscale Labeling Kit can label proteins with molecular weights between 12 and 150 kDa, including IgG antibodies (~150 kDa) in quantities ranging from 20-100 µg.

Gain Experimental Flexibility with a Validated Technology
pHrodo® has been cited in over 150 publications and used in a variety of applications. It is validated in flow cytometry, high throughput and high content screening (HTS and HCS), and other imaging applications. pHrodo® Red offers reduced signal variability and improved timing compared to ratiometric dyes like BCECF and SNARF, and the lack of fluorescence outside the cell eliminates the need for wash steps and quencher dyes. The red fluorescence of pHrodo® Red is ideal for multiplexing applications with green-fluorescent compounds such GFP, Fluo-4, or calcein.

For Research Use Only. Not intended for any animal or human therapeutic or diagnostic use.

Click-IT™ L-Homopropargylglycine (HPG) (Invitrogen™)

Click-iT® homopropargylglycine (HPG) provides a fast, sensitive, non-toxic and most importantly non-radioactive alternative to the traditional technique,35S methionine for the detection of nascent protein synthesis. HPG is an amino acid analog that contains a very small modification, specifically an alkyne moiety that can be fed to cultured cells and incorporated into proteins during active protein synthesis. Detection utilizes the chemoselective ligation or “click" reaction between and azide and an alkyne where the alkyne modified protein is detected with an azide-containing dye or hapten together with either the Click-iT® Cell Reaction Buffer Kit or the Click-iT® Protein Buffer Kit. With the Click-iT® Cell Reaction Buffer Kit, cells can be analyzed by fluorescence microscopy, flow cytometry or high-content imaging and analysis. With the Click-iT® Protein Reaction Buffer Kit, achieve detection sensitivity in 1-D gels and western blots in the low femtomole range or perform LC-MS⁄MS and MALDI MS analysis.

Click-IT™ GlcNAz Metabolic Glycoprotein Labeling Reagent (tetraacetylated N-Azidoacetylglucosamine) (Invitrogen™)

The Click-iT® GlcNAz metabolic glycoprotein labeling reagent provides the first part of a simple and robust two-step technique to identify and characterize intracellular O-GlcNAc glycoproteins. In step one, cultured cells are incubated with the azide-modified glucosamine (GlcNAc). The azido-sugar is incorporated into intracellular O-GlcNAc-containing glycoproteins through the permissive nature of the oligosaccharide biosynthesis pathway. In step two, via the chemoselective ligation or click reaction between an azide and an alkyne, the azido-labeled glycoproteins can then detected with a Click-iT® Glycoprotein Detection kit for gels (TAMRA or Dapoxyl® alkyne) or Western blots (biotin alkyne). The Click-iT® glycoprotein products are compatible with LC-MS⁄MS and Multiplexed Proteomics™ technologies for in-depth analyses of the glycoproteome.