Shop All Gel Electrophoresis Equipment

For Use With (Application)


Quantity


Quantity (No. per Case)


Owl™ D2 Wide-Gel Electrophoresis System Combs Thermo Scientific™

Eliminate comb assembly with Thermo Scientific™ Owl™ D2 Wide-Gel Electrophoresis System Combs. These heavy-duty, one-piece combs are for use with Owl™ D2 Wide-Gel Electrophoresis Systems.

Owl™ A6 Wide Gel Horizontal Electrophoresis System Thermo Scientific™

Produce clear, tight banding patterns with the Thermo Scientific™ Owl™ A6 Wide Gel Horizontal Electrophoresis System, an ideal system for high-throughput laboratories.

Owl™ EasyCast™ B2 and B3 Mini Gel Electrophoresis System Combs Thermo Scientific™

Eliminate comb assembly with Thermo Scientific™ Owl™ EasyCast™ B2 and B3 Mini Gel Electrophoresis System Combs. These heavy-duty, one-piece combs are for use with the EasyCast™ B2 and B3 Mini Gel Electrophoresis Systems.

D3-14, A3-1 and A6 Wide Gel Electrophoresis System Wall Comb, 1 Tooth Thermo Scientific™

Eliminate comb assembly with Fisherbrand™ D3-14, A3-1 and A6 Wide-Gel Electrophoresis System Combs. These microwell and wall combs are heavy-duty, one-piece units for use with the D3-14, A3-1 and A6 wide gel electrophoresis systems.

Cassette Clamp Cam Handle Set

The Cassette Clamp Cam Handle Set is a retrofit part for the Bolt® Mini Gel Tank to enable it to securely fit Novex® gels, NuPAGE® gels, and Bolt® Bis-Tris Plus gels in a manner similar to the Mini Gel Tank. Customers who have the Bolt® Mini Gel Tank can replace the original black cam handles on their cassette clamps with these grey cam handles to more conveniently run these 10 cm wide gels.

About the Mini Gel Tank
The Mini Gel Tank is compatible with a variety of Novex® gels, NuPAGE® gels, and Bolt® Bis-Tris Plus gels. Each Mini Gel Tank can accommodate up to two gels per run. The unique tank design enables convenient side-by-side gel loading and enhanced viewing during use. Optimized conditions using constant voltage allow for Bolt® Bis-Tris Plus gels to be run in approximately 35 minutes. Run times may vary depending on buffer conditions and power supplies being used.

Owl™ EasyCast™ B1 Mini Gel Electrophoresis System Combs Thermo Scientific™

Eliminate comb assembly with Thermo Scientific™ Owl™ EasyCast™ B1 Mini Gel Electrophoresis System Combs. These heavy-duty one-piece combs are for use with the EasyCast™ B1 Mini Gel Electrophoresis System.

Bolt™ Empty Mini Gel Cassette Combs, 12-well Invitrogen™

Bolt® Empty Gel Cassette Combs are for use with Bolt® Empty Gel Cassettes, which give you the option of pouring your own special gel type while still enjoying the advantages of the Mini Gel Tank. All cassettes are sealed on three sides (so no gel leakage) and feature the unique wedge-shaped well design. The cassettes and combs are available in the standard 1-mm thickness. The combs are available for 10 or 12 wells.

Blotting Tweezer Invitrogen™

The Blotting Tweezer is a replacement part for the Bolt™ Mini Blot Module. It is for general use of handling nitrocellulose or PVDF membranes.

About the Bolt™ Mini Blot Module
The Bolt™ Mini Blot Module is a wet transfer device used exclusively with the Bolt™ Mini Gel Tank. The tank accommodates one blot module per chamber, or two blot modules total with the side-by-side layout. The Bolt™ Mini Blot Module is compatible with Bolt™ Bis-Tris Plus gels and accommodates one gel per wet transfer. The universal connection and molded gasket make the blot module easy to use, while the inner core of the blot module allows for use of less methanol-based transfer buffer per wet transfer. At the recommended conditions and constant voltage, proteins can be transferred to nitrocellulose or PVDF membranes typically in 30 to 60 minutes.

About Bolt™ Bis-Tris Plus Gels
Bolt™ Bis-Tris Plus gels are precast polyacrylamide gels designed for optimal separation of your small- to medium-sized proteins under denaturing conditions. Similar to NuPAGE® Bis-Tris gels, Bolt™ Bis-Tris Plus gels are designed to deliver consistent gel performance and provide a neutral pH environment that minimizes protein modifications. Bolt™ gels are ideal for western blot transfer and analysis, and any other techniques where protein integrity is crucial. Also use Bolt™ gels to obtain optimal results for your day-to-day protein separation needs. Bolt™ Bis-Tris Plus gels come in four gel types and multiple well formats. Each box contains 10 gels. A Bolt™ Mini Gel Tank is required for use of all Bolt™ gels.

E-Gel™ Imager UV and Blue Light Base Replacement Power Cord

The E-Gel® Imager UV and Blue Light Base Replacement Power Cord can be used to power either the E-Gel® Imager UV Light Base or E-Gel® Imager Blue Light Base. It is a replacement for the power cord that was included in the original package of the light base.

For Research Use Only. Not intended for animal or human diagnostic or therapeutic use.

Owl™ P10DS Dual Gel System Replacement Parts Thermo Scientific™

Keep your dual gel system running with Thermo Scientific™ Owl™ P10DS Dual Gel System Replacement Parts. Parts are for use with the Owl™ P10DS Dual Gel System, an optimal device for a large number of samples that need extended separation and mobility shift assays.

Owl™ Leveling Platform Thermo Scientific™

Accommodate most applications with the Thermo Scientific™ Owl™ Leveling Platform, a three-point leveling platform that ensures a flat casting and running surface.

Owl™ A1 Large Gel Electrophoresis System Standard Comb Thermo Scientific™

Eliminate comb assembly with this assortment of heavy-duty, one-piece Thermo Scientific™ Owl™ A1 Large Gel Electrophoresis System Combs, for use with Owl A1 Large Gel Electrophoresis Systems.

E-Gel™ Imager Camera Hood Replacement Power Cord

The E-Gel® Imager Camera Hood Replacement Power Cord can be used to power the E-Gel® Imager Camera Hood. It is a replacement for the power cord that was included in the original package of the E-Gel® Imager Camera Hood.

For Research Use Only. Not intended for animal or human diagnostic or therapeutic use.

E-Gel™ Power Snap Electrophoresis System Starter Kit, EX 1% Invitrogen™

The Invitrogen E-Gel Power Snap Electrophoresis System Starter Kit, EX 1%, provides everything you need to quickly start using precast E-Gel EX 1% agarose gels on the system for a streamlined gel electrophoresis and gel imaging workflow.

The kit includes:
• 10 E-Gel EX agarose gels, 1% (Cat. No. G401001)
• E-Gel Power Snap Electrophoresis System (Cat. No. G8300)
• E-Gel 1 Kb Plus Express DNA Ladder with E-Gel Sample Loading Buffer (1X) (Cat. No. 10488091)
• Gel opening knife (Cat. No. EI9010)

Learn more about the E-Gel Power Snap Electrophoresis System ›

Learn more about precast E-Gel EX agarose gel technology ›

Owl™ P82 Dual Gel System Replacement Parts Thermo Scientific™

Ensure flat, even banding and crisp resolution with Thermo Scientific™ Owl™ P82 Dual Gel System Replacement Parts. For use with the Owl™ P82 Dual Gel System, parts include replacement plates, gaskets and wedges.

Results per page
    spinner