Documents & Support

1-15 of 67,877 Results

Dropper Bottle Performance Product Literature

Bottled Media Brochure Product Literature

Bottle Top Filters Manual / Product Insert

  • Pub. No.: 889536b09c5e7b395a0848edc26263ccb33ef923
  • Version: FEB.2016

Manual: Replacing bottle seals on reagent bottles (English ) Manual / Product Insert

  • Pub. No.: b800c991d57586f8b8a98e319511e9df47182780
  • Version: 20 Jun 2007

What ships with the microplate washers? Do I need to order anything extra? Product FAQ

Answer

If you are only performing ELISAs in 96 well plates, you do not need to order anything extra. 5165000 Wellwash ships with one 8-tip wash head, 1 wash bottle and 1 waste bottle. 5165040 Wellwash ships with one 12-tip wash head, 1 wash bottle and 1 waste bottle. 5165010 Wellwash Versa ships with two 8-tip wash heads, 3 wash bottles and 1 waste bottle. 5165050 Wellwash Versa ships with two 12-tip wash heads, 3 wash bottles and 1 waste bottle. If you are washing adherent cells in 96 well plates on Wellwash Versa, you must order the special cell wash head (Cat. No. N10802). If you are washing 384 well plates on Wellwash Versa, you must order the 16-tip wash head (Cat. No. N10803.) Extra wash bottles, waste bottles, and bottle stands my be ordered separately as well.

Answer Id: E16696

Was this answer helpful?

Yes No

Thank you for your response

How can I tell whether or not a reagent bottle is pressurizing correctly when using the Procise System? Product FAQ

Answer

You can backflush the bottle's pickup line in manual control (there is a specific function for each bottle position on the Procise System) and observe its bubbling, which should slow and then stop within a short period (depending upon how full the bottle is) as it pressurizes with argon. If it continues to bubble, either the cap assembly is leaking or the pressurizing or venting valves for the bottle are.

Answer Id: E1261

Was this answer helpful?

Yes No

Thank you for your response

What is included in the Ion PGM Wash 2 Bottle Kit (Cat. No. A25591)? Product FAQ

Answer

Here are the kit components:

Wash 2 Bottle w/label (2 L): 1 bottle
Wash 2 Bottle Conditioning Solution: 125 mL

Find additional tips, troubleshooting help, and resources within our Next-Generation Sequencing Support Center.

Answer Id: E15134

Was this answer helpful?

Yes No

Thank you for your response

How is the new One Shot FBS bottle different from our existing One Shot bottle? Product FAQ

Answer

Our previous One Shot bottle, a 60 mL Nalgene media bottle, is not designed for easy pipetting and pouring whereas the new One Shot FBS bottle has a propietary design that was developed specifically for FBS use. This design allows you to freeze, thaw and pour without the need to aliquot, which minimizes the amount of FBS handling and reduces the risk of contamination.

Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.

Answer Id: E14697

Was this answer helpful?

Yes No

Thank you for your response

Centrifuge bottles product drawing Product Literature

Manual / Product Insert

  • Pub. No.: 633821a780d27e81a5c61afada1b798c2a81084d
Catalog # 75003872

What should I do if the message "There may be a blockage or no NaOH in W1. Please check W1 and run line clear then try again" appears during initialization of my Ion PGM System? Product FAQ

Answer

Please check the following:
1) That there is solution left in the W1 bottle
2) That the sippers and bottles are not loose

If the sippers and bottles are not loose and there is at least 200 mL of solution in the W1 bottle, the line between W1 and W2 may be blocked. Please run the line clear.

If the same error message appears even after the line is clear, detach the reagent bottles from the Ion PGM System, water clean and shut down the instrument. Cap the reagent bottles. Restart the instrument and check the Ion PGM chip. Open the chip clamp and check that there is no solution standing in the port of the chip. If there is some solution, change the chip to another used chip or a new chip.

Place the W2 and W3 bottles back on the Ion PGM System. Discard the solution inside the W1 bottle, make more solution by adding 350 µL of 100 mM NaOH, and place it back on the Ion PGM System. Restart initialization.

Find additional tips, troubleshooting help, and resources within our Next-Generation Sequencing Support Center.

Answer Id: EJP01168

Was this answer helpful?

Yes No

Thank you for your response

nalgene clean bottles(japanese) Product Literature

Are empty Gibco bottles available for sale? Product FAQ

Answer

Yes, empty Gibco bottles are available for sale in 100 mL, 500 mL, and 1000 mL sizes.

Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.

Answer Id: E5404

Was this answer helpful?

Yes No

Thank you for your response

How do I prepare 1 L of 0.1 N Silver nitrate from one unit of Silver nitrate, Acculute Standard Volumetric Solution, Final Concentration 0.1 N? Product FAQ

Answer

We recommend the following protocol to prepare 1 L of .1N Silver nitrate:

  1. Transfer the entire contents of the bottle into a 1 L volumetric flask.
  2. Rinse the bottle residue, the threads of the bottle, and the inner bottle cap with deionized water, and transfer to the 1 L flask.
  3. Repeat the step 2 rinse three times.
  4. Bring the 1 L flask to volume with deionized water and mix well. The final solution in the 1 L flask has a concentration of 0.1 N.

Answer Id: E21818

Was this answer helpful?

Yes No

Thank you for your response

How do I heat inactivate serum? Product FAQ

Answer

Heat at 56 degrees C in a water bath for 30 minutes. Swirl bottle every 10 minutes or so. For accuracy, use a second bottle of similar size and add the equivalent volume of water to this bottle. Place a thermometer in this control bottle in order to see when 56 degrees C is reached. Set your timer for 30 minutes at this point.

Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.

Answer Id: E2997

Was this answer helpful?

Yes No

Thank you for your response

Results per page