Documents & Support

1-15 of 881 Results

Replace the Desiccant Product Literature

Liver Desiccated Product Literature

PRODUCT SPECIFICATION: CARTRIDGE CONTAINER WITH DESICCANT HP0055A DESICCANT SACHETS HP0063A (V2) Product Literature

In the TaqMan SCID/SMA Assay and TaqMan SCID/SMA Plus Assay, why does the laboratory plate shaker require 1500 rpm speed? Product FAQ

Answer

The validated dried blood spots (DBS) wash protocol includes centrifugation at 1500 rpm for 30 min. This protocol is suitable for various DBS sample types: desiccated, non-desiccated, >7 days from preparation, ≥7 days from preparation (freshly prepared). A higher rpm is required for DBS samples that have been desiccated for long term storage to adequately remove DNA from the DBS punch.

Answer Id: E21013

Was this answer helpful?

Yes No

Thank you for your response

What are the storage conditions for dried blood spots (DBS) before use? Product FAQ

Answer

For short term storage, we recommend storing dried blood spots (DBS) desiccated or non-desiccated at room temperature.
For long term storage, we recommend storing dried blood spots (DBS) at room temperature or at -20 degrees C.

Answer Id: E21032

Was this answer helpful?

Yes No

Thank you for your response

In the TaqMan SCID/SMA Assay and TaqMan SCID/SMA Plus Assay, if I plan to use only non-desiccated and freshly prepared samples, do I need to do 30 min of DBS washing? Product FAQ

Answer

For non-desiccated and freshly prepared samples, 10 min of DBS washing with wash buffer works well, however, customer will need to validate this modified workflow.

Answer Id: E21014

Was this answer helpful?

Yes No

Thank you for your response

Nalgene Vacuum Desiccator Package Insert Manual / Product Insert

  • Pub. No.: cffc4ed32cd7943adc82a062bf3ccd0d4bb7845c
  • Version: FEB.2016
Catalog # 5310-0250

Nalgene Vacuum Desiccator Package Insert Product Literature

You offer the MagMAX CORE Mechanical Lysis Module & Glass Microbeads Bundle with CORE Chemistry and the MagMAX CORE Nucleic Acid Purification Kit + Mechanical Lysis Module. What is the difference between these kits and which kit should I order? Product FAQ

Answer

The only difference is that the MagMAX CORE Mechanical Lysis Module & Glass Microbeads Bundle with CORE Chemistry (Cat. No. A37488) contains glass microbeads, whereas the other kit (Cat. No. A37487) does not. The beads are also available as a standalone item (Cat. No. A37489) and aid in the homogenization of completely desiccated fecal or environmental samples. These glass microbeads are added to the desiccated sample together with some deionized water, vortexed, and incubated for about 10 minutes prior to the bead beating step.

Answer Id: E16349

Was this answer helpful?

Yes No

Thank you for your response

Can plates be blocked with SuperBlock Blocking Buffer and then stored dry? Product FAQ

Answer

After the plates are blocked, remove the blocking buffer and air dry the plates for several hours. Store plates with desiccant in a plastic bag at 4°C. Change desiccant after 24 hours for optimal storage. The plates should be stable for at least 12 months.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Answer Id: E8473

Was this answer helpful?

Yes No

Thank you for your response

Nalgene 150mm Desiccator Package Insert Manual / Product Insert

  • Pub. No.: 7d6b2d936e8f0338788461314f54b26594cbfefb
  • Version: FEB.2016

What are the components of the HCS CellMask Near-IR Stain and how should I store them? Product FAQ

Answer

Each HCS CellMask Stain provides sufficient material for labeling approximately 10 x 96-well plates using an assay volume of 100 µL. The product is shipped as two components: a single vial of 250 µg of solid Near-IR Stain (Component A) and a single vial of 100 µL of DMSO (Component B).

We recommend storing Component A at ≤ -20 degrees C, desiccated and protected from light and Component B desiccated at ≤ 25 degrees C.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

Answer Id: E19027

Was this answer helpful?

Yes No

Thank you for your response

What can be used to make a stock solution of Invitrogen BODIPY 493/503 dye (Cat. No. D3922)? Product FAQ

Answer

For Invitrogen BODIPY 493/503 dye (Cat. No. D3922), one may make a stock solution of 1 mg/mL (3.8 mM) in either absolute ethanol or anhydrous DMSO. After resolubilizing in either solvent, store the stock solution frozen, desiccated, and protected from light. The gradual accumulation of moisture in the solvent will promote aggregation over time, hence store the stock solution desiccated.

For long-term storage, dissolve the dye in absolute ethanol, make smaller aliquots in separate vials, and then evaporate off the ethanol using a vacuum pump. Store the solid dye frozen and protected from light.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

Answer Id: E10393

Was this answer helpful?

Yes No

Thank you for your response

With the TaqMan SCID/SMA Assay and TaqMan SCID/SMA Plus Assay, what color should the dried blood spots (DBS) be after extraction? Product FAQ

Answer

Extracted dried blood spots (DBS) punches obtained from freshly prepared samples appear nearly white/cream. If the DBS sample was prepared >7 days ago or has been desiccated for a prolonged period of time, the color may appear light red/brown. If the extracted DBS punch remains a dark red/brown color, additional wash time may be required.

Answer Id: E21012

Was this answer helpful?

Yes No

Thank you for your response

Manual / Product Insert

  • Pub. No.: b0978b128838bb62690d690da04469dbc494e5d3
Catalog #
Results per page