Effectively seal all microplate formats to minimize evaporation and protect samples from contamination and spilling, ensure a consistent, reliable seal with all microplate formats with this easy-to-use, handheld applicator, and get significantly quicker dry-down times than standard methods, and remove most chromatography solvents in just minutes with easy to use 96-well sample concentrators.
Thermo Scientific storage plate cap strips are suitable for use on Round Well Storage Plates and feature a low-profile design. They come in an 8-cap strip and can simultaneously seal up to 8 well. Each cap is individually numbered.
Features of Thermo Scientific storage plate cap strips:
• 8-cap strip
• Each cap is individually numbered
• Simultaneous sealing of 8 wells
• End tabs for ease of removal
• Low profile for increased well volume
Thermo Fisher Individual Storage Plate Caps are designed for sealing storage plates and cluster tubes.
Features of Thermo Fisher Individual Storage Plate Caps
• Low profile for increased well volume
• End tabs for ease of removal
• Individual Caps
The Thermo Scientific 384 Multisip Septum Cap Mat features a split septum design. This is perfect for sealing tall chimney 384-well PCR and storage plates. This mat can withstand a wide range of temperatures, and the product is 100% reseable even after multiple piercings. Caps can be pierced simultaneously.
Features of Thermo Scientific 384 Multisip Septum Cap Mats
• Available as a set of 5 mats (AB-1176) or 50 mats (AB-1171)
• 384 split septum caps for use with 384-well tall-chimney plates (AB-0937, AB-1055, AB-1056)
• Suitable for PCR when used in conjunction with screw or clip-down heated lid thermal cyclers
• Pierceable with standard pipetting equipment
• 384 septum caps may be pierced simultaneously
• Less than 0.5 N pierce pressure per cap
• 100% re-sealing after multiple piercings
• Solvent resistant, including acetonitrile and DMSO†
• Fully autoclavable
• Temperature range:-20°C to +120°C
†For long-term storage with DMSO, we recommend that samples be stored at 4°C or below.
Smart ARK™ High-Energy Throughput Multi-Bounce HATR Plates and Accessories offer a wide variety of crystal types and angles to meet a variety of analytical needs.
The Thermo Scientific™ HyPerforma Support Plate for 200L Conical HDPE Drums enables easy transport of BioProcess Container Systems™ (BPC™s).
• Round plastic disk for use with conical HDPE drums with 4 ″ port
• Supports up to 200L drums
The use of SPE sample preparation can significantly enhance the robustness and reliability of many biological, pharmaceutical, forensic and environmental applications.
Thermo Scientific™ HyperSep Base Plates are available singly or in packs of five, and are used with HyperSep 96-well plate applications.
Eliminate sample preparation while retaining exceptional throughput with the ultra-high-performance, versatile Smart iTR Attenuated Total Reflectance (ATR) Sampling Accessory. Primarily designed for use with a single bounce diamond crystal, the Smart iTR Accessory also offers other options for full configurability. It provides exceptional sensitivity and IR throughput.
Build a more efficient microbiology laboratory and automate all aspects of specimen processing with COPAN WASP™DT Instrument Accessories and Software. Structure the modular system according to the unique needs of your laboratory, and choose from a variety of instrument accessories, from enrichment broth inoculation to an automatic loop and tool changing station, to drive productivity from start to finish as well as maximize current and future investments.
The WASP™DT System works seamlessly with Thermo Scientific™ Remel™ prepared media products which are optimized for automation.
Use Thermo Scientific™ ALPS heat sealer accessories with the ALPS 25 Manual Heat Sealer and ALPS 50 V Microplate Heat Sealer. The foil stripper, AB-0592, is also compatible with the ALPS 3000 Microplate Heat Sealer.
Thermo Scientific NeutrAvidin Protein Coated Clear 8-Well Strip Plates are pre-blocked and ready-to-use polystyrene plates for binding biotinylated antibodies or probes for ELISA and other target-specific assays.Features of NeutrAvidin Protein Coated Clear 8-Well Strip Plates:
• Clear plates for colorimetric detection methods
• Pre-blocked with SuperBlock Blocking Buffer
• Easy and gentle immobilization of biotin-containing conjugates
• Low nonspecific binding
• No denaturing of the protein component of a conjugate upon binding
• Ideal for binding small biotinylated hydrophilic molecules (e.g., peptides) that typically exhibit poor binding to polystyrene
• Less expensive than streptavidin coated plates
• Lowest nonspecific binding properties of all biotin-binding proteins
Biotin-binding plates are ideal for applications when direct adsorption to polystyrene denatures antibodies or the target molecule. Streptavidin is the most popular and widely available biotin-binding protein for research methods. Streptavidin has an isoelectric point of 5 to 6, resulting in low nonspecific interactions. Thermo Scientific NeutrAvidin Protein is a deglycosylated form of avidin, which has a near-neutral pI (6.3), resulting in even lower nonspecific interactions. NeutrAvidin Protein has the additional advantage of lacking the bacterial RYD sequence found on streptavidin, which eliminates off-target binding to the RGD binding domain of adhesion receptors present in a variety of cells.
Pierce™ NeutrAvidin™ Coated Plates, Clear, 96-Well
Pierce™ NeutrAvidin™ Coated Plates, Clear, 384-Well
These accessories are for use with the Wellwash™ Microplate Washer. Wash 96-well plates securely with the Thermo Scientific™ Wellwash™ Microplate Washer, an easy-to-use, reliable microplate-strip washer for routine ELISA applications. The Wellwash features a graphical user interface, local language versions and USB port for optimal ease-of-use and convenience. Simplify your ELISA workflow by using our eGuide to see our complete portfolio for all your ELISA needs.
This TAMRA™ dye spectral calibration plate can be used to maintain your ViiA™ 7, QuantStudio™ 6 Flex, QuantStudio™ 7 Flex, or QuantStudio™ 12K Flex system with Fast 96-well block. Calibration and verification should be run at least every six months. Please see your instrument maintenance guide for full instructions on use.
The dye formulations for your real-time PCR system will improve results with multiplexing by more accurately representing fluorescent spectra found in your real-time PCR experiments.
For Use With: Thermo Scientific™ Digital and Touch Screen Dry Baths/Block Heaters (No compact models)
Applied Biosystems® TaqMan® RNase P Fast 48-Well Instrument Verification Plate is used to verify the performance of the Applied Biosystems® StepOne™ Real-Time PCR System. The TaqMan® RNase P Fast 48-Well Instrument Verification Plate is a 48-well PCR plate preloaded with the necessary reagents to detect and quantitate genomic copies of the human RNase P gene, a single-copy gene encoding the RNA moiety of the RNase P enzyme. Each well contains preloaded reaction mix (1X TaqMan® Universal PCR Master Mix, RNase P primers, and FAM™ dye–labeled probe) and template. The TaqMan® RNase P Fast 48-Well Instrument Verification Plate satisfies the same requirements as the Applied Biosystems® StepOne™ Real-Time PCR Systems installation. To pass installation, the instrument must demonstrate the ability to distinguish between 5,000 and 10,000 genomic equivalents with a 99.7% confidence level for a subsequent sample run in a single well. To ensure accurate results, Applied Biosystems® recommends that the performance of your instrument be verified every six months.