E-Gel DNA Ladders & Sample Loading Buffer
Invirtrogen E-Gel DNA ladders are premixed with loading buffer and formulated specifically for optimum performance on Invitrogen E-Gel precast agarose gels.
- Performance—designed for use on E-Gel agarose gel cassettes
- Sharp, clear bands—chromatography-purified fragments for consistent and reliable results
- Versatile—broad size range from 10 bp to 12 Kb
- Convenient—premixed in loading buffer, supplied with loading dye for sample DNA, and stable at room temperature
Quicklinks
Selecting the best E-Gel DNA Ladder for your analysis
The key to accurate band analysis is to use the correct DNA ladder for your particular application. By selecting the E-Gel DNA Ladder of interest in Table 1, you will be directed to the corresponding product page for more details and ordering information. Also, review the compatibility table below for the recommended E-Gel DNA Ladders for different types of E-Gel agarose gels (Table 2).
Table 1. E-Gel DNA Ladder selection guide
Gel Type | Gel Cat. No. | % Agarose | E-Gel 96 High Range DNA Marker | E-Gel 1 Kb Plus Ladder | E-Gel 1 Kb Plus Express Ladder | E-Gel 50 bp DNA Ladder | E-Gel Low Range Quantita- tive DNA Ladder |
E-Gel Sizing DNA Ladder | E-Gel Ultra Low Range DNA Ladder |
---|---|---|---|---|---|---|---|---|---|
Cat. No. 12352019 | Cat. No. 10488090 | Cat. No. 10488091 | Cat. No. 10488099 | Cat. No. 12373031 | Cat. No. 10488100 | Cat. No. 10488096 | |||
E-Gel EX | G401001 | 1% | ⭕ | ⭕ | 🔴 | ⭕ | |||
G401002 | 2% | ⭕ | 🔴 | ⭕ | 🔴 | ||||
G401004 | 4% | 🔴 | |||||||
E-Gel SYBR Safe | G521801 | 1.2% | ⭕ | 🔴 | 🔴 | ⭕ | |||
G521802 | 2% | ⭕ | ⭕ | 🔴 | ⭕ | ||||
E-Gel Single Comb | G501808 | 0.8% | ⭕ | 🔴 | 🔴 | ⭕ | |||
G501801 | 1.2% | ⭕ | 🔴 | 🔴 | ⭕ | ||||
G501802 | 2% | ⭕ | ⭕ | 🔴 | ⭕ | ||||
G501804 | 4% | 🔴 | |||||||
E-Gel Double Comb | G601808 | 1% | ⭕ | 🔴 | ⭕ | ||||
G601802 | 2% | ⭕ | 🔴 | ⭕ | |||||
E-Gel CloneWell II | G661818 | 0.8% | ⭕ | 🔴 | |||||
E-Gel SizeSelect II | G661012 | 2% | ⭕ | 🔴 | |||||
E-Gel NGS | A25798 | 0.8% | 🔴 | 🔴 | ⭕ | ||||
E-Gel Go! | G441001 | 1% | ⭕ | ⭕ | 🔴 | ⭕ | |||
G441002 | 2% | ⭕ | 🔴 | ⭕ | |||||
E-Gel 48 | G800801 | 1% | ⭕ | ⭕ | ⭕ | 🔴 | |||
G800802 | 2% | ⭕ | ⭕ | 🔴 | |||||
G800804 | 4% | 🔴 | ⭕ | ||||||
E-Gel 96 | G700801 | 1% | 🔴 | ||||||
G700802 | 2% | 🔴 | |||||||
E-Gel 96 SYBR Safe | G720802 | 2% | 🔴 |
🔴 Recommended Ladders
⭕ Compatible Ladders
E-Gel Sample Loading Buffer
The Invitrogen E-Gel Sample Loading Buffer is a 1X buffer designed for use with E-Gel agarose gels. The buffer comes ready to use, and does not require further dilution. It contains the unique tracking dyes Xylene Cyanol FF (XCFF) and Tartrazine. These dyes allow you to visually track DNA migration during electrophoresis, and help indicate when maximum resolution is achieved.
Ordering information
Resources
Nucleic acid education
Learn about gel electrophoresis basics, workflows, considerations, applications, and troubleshooting in separation and analysis of nucleic acids.
Related products
Support
Nucleic Acid Purification and Analysis Support Center
Find tips, troubleshooting help, and resources for your nucleic acid purification and analysis applications.
Product support documentation
Search for manuals, protocols, Material Safety Data Sheets, product literature and certificates by catalog number or product name.
Contact us
Email or call our Technical Application Scientists for additional questions regarding DNA ladders
For Research Use Only. Not for use in diagnostic procedures.