Applied Biosystems™

3500xL Genetic Analyzer 24-Capillary Array, 36 cm

Les capillaires sans revêtement interne sont fournis dans des ensembles préassemblés de 24 capillaires par grille, avec un cadre intégréAfficher plus

Référence	Quantité
4404687	1 réseau

Référence 4404687

Prix (EUR)

3 205,00

Quantité:

1 réseau

Prix (EUR)

3 205,00

Les capillaires sans revêtement interne sont fournis dans des ensembles préassemblés de 24 capillaires par grille, avec un cadre intégré pour une installation facile.

Applications des capillaires de 36 cm :
Applications d’identification humaine⁄médico-légales

Usage exclusivement réservé à la recherche.Ne pas utiliser pour des procédures de diagnostic.

Usage exclusivement réservé à la recherche. Ne pas utiliser pour des procédures de diagnostic.

Spécifications

Longueur des capillaires36 cm

DescriptionRéseau de 24 capillaires, capillaire de 36 cm, capillaires sans revêtement interne, applications d’identification humaine, à utiliser avec l’analyseur génétique 3500xL, température ambiante

À utiliser avec (application)Séquençage, identification humaine

À utiliser avec (équipement)Analyseur génétique 3500xL

Type de produitAnalyseur génétique 3500xL

Quantité1 réseau

Conditions d’expéditionTempérature ambiante

Unit SizeEach

Contenu et stockage

Conserver ce réseau à température ambiante. Pour plus d’informations sur le stockage du réseau capillaire sur et hors de l’instrument, reportez-vous au guide de maintenance, de dépannage et de référence de votre analyseur génétique.

Foire aux questions (FAQ)

My array is stuck in the pump on my Applied Biosystems 3500/3500xL Genetic Analyzer, even after loosening the knob. What can I do?

If the array is stuck in the pump, even after loosening the knob, squirt around the edge of the array head with distilled water and try to remove it again. If the array will not move, a service call may be required. Do not use excessive force or tools to try and remove it.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

When I started my run on the Applied Biosystems 3500/3500xL Genetic Analyzer, an error occurred: "Unstable Electrophoresis current detected, check for air bubbles" but I don't see any bubbles. What else can cause this?

Some of the other causes of an Unstable Electrophoresis current detected error message are:

1.Leak on the system
2. Polymer that:
-Has expired
-Has been left on the instrument for more than the recommended time
-Is a mixture of expired polymer and non-expired polymer
3. Running Buffer that was:
-On the instrument longer than 2 weeks
-Not filled to the fill line or evaporated below the fill line
4. An arcing event that was not cleaned afterwards using the water wash wizard
5. Not performing regular maintenance on the instrument
6. Hardware issues

Inspect the system for leaks. If you do not see any leaks on the system, perform the wash the pump chamber and channels wizard using the conditioning pouch and place fresh, non-expired polymer and fresh Anode and Cathode buffer containers. If the problem persists, a service call may be required.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

I have an Applied Biosystems 3500/3500xL Genetic Analyzer. When do my consumables expire?

If we do not specify the expiry date or number of uses, the warranty will last for 12 months from the date of shipment.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

How often should I change the array on my Applied Biosystems 3500/3500xL Genetic Analyzer?

The Applied Biosystems 3500/3500xl Genetic Analyzer capillary arrays are warrantied for a specific number of runs or until the expiration date printed on the array package, whichever comes first. If you notice that you are starting to get reduced data quality (e.g., shorter reads, trailing peaks in all 4 colors) even with the Sequencing Standard, these may be signs that the array requires changing.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

My Applied Biosystems 3500/3500xL Genetic Analyzer consumables have expired, but how long past expiration can I really use them?

Thermo Fisher Scientific can only provide warranty on performance on non-expired reagents. Using reagents past their expiration date is a risk and may compromise your data integrity.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

View all 3500xL Genetic Analyzer 24-Capillary Array, 36 cm FAQs