SOLiD™ EZ Bead™ Emulsifier E120 Reagents Kit

The SOLiD™ EZ Bead™ Emulsifier combines an aqueous phase with an oil phase, creating an emulsion that contains microreactors containing the necessary reagents and components for amplifying the library of interest onto a solid surface, namely beads. This process takes up to 30 minutes to complete, depending on the desired bead yield.

The new SOLiD™ EZ Bead™ System simplifies next-generation sequencing workflows by providing an automated solution for reproducible templated bead preparation with less than 1 hour of hands-on time. The system is specifically designed with system modularity and quality control check points for greater experimental control. SOLiD™ EZ Bead™ System streamlines the sequencing workflow through significant time savings and support for up to 96 multiplexed libraries.

• 80% reduction in hands-on time
• Increased reproducibility
• Multiplexed library support, which facilitates maximum time and cost savings
• Modularity to fit individual throughput and lab needs
• Quality control checkpoints throughout the workflow for greater experimental control

Automated Workflow
The SOLiD™ EZ Bead™ System automates theSOLiD™ System workflow from emulsion PCR to templated bead deposition. The availability of pre-packaged reagents minimizes handling errors and improves the quality and quantity of templated beads. With less than 1 hour of hands-on time, sample preparation time is reduced by 80% (Figure 1).

Quality Control
The open architecture of the SOLiD™ EZ Bead™ System offers quality control checkpoints to ensure high quality sequencing results. Self-contained consumables and automated decontamination procedures help minimize cross contamination between samples, further increasing data quality.

Modular Design
Specifically designed to fit individual throughput and laboratory needs, the SOLiD™EZ Bead™ System facilitates customizable instrument configurations to align with your research. The system’s three modules, the SOLiD™ EZ Bead™ Emulsifier, the SOLiD™ EZ Bead™ Amplifier, and the SOLiD™ EZ Bead™ Enricher, support multiple sequencing instruments and extend to the entire family of SOLiD™ Analyzers.

Scalable Throughputs
The SOLiD™ EZ Bead™ System supports bead outputs for 1, 4, and 8-well slide configurations with corresponding E10, E20,and E80 prepackaged reagents to accommodate a variety of high-, medium-,and low-throughput applications. Additional support for multiplexed libraries helps further allows for high quality, cost effective sequencing.

For Research Use Only. Not for use in diagnostics procedures.