Heracell™ 240i CO₂ Incubator, 240 L, Electropolished Stainless Steel

Capteur de CO2 : Capteur IR ; Plage de températures : Temp ambiante +3°C à 55°C

Référence	Capacité (métrique)
51026420	240 l

Référence 51026420

Prix (EUR)

Demander un devis

Capacité (métrique):

240 l

CO2 Sensor: IR Sensor; Temperature Range: Ambient +3°C to 55°C

Direct heat chamber

240L (8.4 cu. ft.) electropolished stainless steel chamber with compact footprint, easily stackable
Standard left hand door swing, field reversible by qualified service support
Minimal, easy-to-clean assembly with smooth inner chamber and rounded corners for easy cleaning
In-chamber fan gently distributes conditioned, humidified air throughout the chamber ensuring homogeneous conditions

In situ sensors and probes designed for precise monitoring

Choice of TC (thermal conductivity) CO₂ sensor for long, reliable operation or IR (infrared) CO₂ sensor for monitoring when humidity and temperature are less predictable
Dual temperature probes with over temperature protection

Rapid response humidity reservoir

Directly heated water reservoir designed to provide stable, high relative humidity, preventing culture desiccation
Pan-less system provides recovery rates up to 5X faster than traditional water pans
Water level sensor indicates when a refill is needed

ContraCon 90°C moist heat disinfection cycle

On-demand cycle simplifies cleaning and eliminates the need to separately autoclave components
Operation is push-button simple and does not require removal of sensors or other components
Independently validated to eliminate a wide range contaminants including bacteria, molds, fungal spores, and mycoplasmas

Intuitive, interactive iCAN touchscreen control

Bright LED screen allows monitoring of all incubator interactions
Provides visibility to changes in culture environment with performance trend graphing, error and usage logs
Convenient on-screen user prompts and reminders for easy navigation
Selectable languages simplify operation: English, Spanish, German, French, and Italian

Wireless Monitoring Solution

Thermo Scientific™ DeviceLink HUB™, our easy-to-install solution, works with the Thermo Fisher Cloud to monitor conditions inside your CO2 incubators.

DeviceLink HUB monitors chamber temperature, gas levels, alarms, and alerts from the incubator data output connection, RS-232 or USB
Alarms and notifications are also sent to the user by email and mobile push notification
DeviceLink HUB is an optional accessory for models with the iCAN touchscreen interface
DeviceLink HUB is available in the following regions
- United States and Canada
- 28 members of the European Union
- Iceland, Liechtenstein, Norway, and Switzerland

Ordering information

To configure 230V models to tri-gas with O₂ control, please order 51900702 for 1-21% and 51900703 for 5-90% control.

Spécifications

Capacité (impériale)8.4 cu. ft.

Sorties de donnéesRS232

DescriptionSingle 240L incubator

Dimensions (P x l x H) intérieures23 x 23.9 x 26.4 in. (58.3 x 60.7 x 67 cm)

Dimensions (L x l x H)32.8 x 30.7 x 36.8 in. (83.4 x 78 x 93.4 cm)

Alimentation électrique120 V, 50/60 Hz

Source d’humiditéRéservoir d’eau intégré

ÉclairageLED

Contrôle de l’oxygèneNone

TypeCO₂ Incubator

Poids (impériale)178 lb.

Plage de concentrations en CO20 à 20%

Technologie de capteur de CO2Capteur IR

Capacité (métrique)240 l

Matériau de la cuveAcier inox électropoli

MatériauAcier inoxydable

Humidité relative<90% at 37°C

Plage de températures (métrique)Ambient +3° to 55°C

Tension120 V

Unit SizeEach

Heracell™ 240i CO2 Incubator, 240 L, Electropolished Stainless Steel

Heracell™ 240i CO₂ Incubator, 240 L, Electropolished Stainless Steel