Thermo Scientific™

GC-MS à simple quadripôle ISQ™ 7610

Référence: ISQ7610-AEI
Thermo Scientific™

GC-MS à simple quadripôle ISQ™ 7610

Référence: ISQ7610-AEI

Pour garder une longueur d’avance, les laboratoires d’analyse ont besoin d’un système de GC-MS sur lequel ils peuvent compter et qui produit des résultats fiables, jour après jour. Pour cela, vous pouvez compter sur le système de GC-MS à simple quadripôle Thermo Scientific™ ISQ™ 7610. Les opérations simplifiées, les flux de travaux automatisés et la plage dynamique étendue offrent des résultats cohérents d’un système à l’autre dans chaque laboratoire. La technologie Thermo Scientific™ NeverVent™, le détecteur à durée de vie étendue et le logiciel intelligent éliminent les temps d’arrêt inutiles afin d’optimiser le débit d’échantillons. Pour vous assurer d’être prêt à relever tous les défis analytiques, le système peut être mis à niveau d’une configuration d’entrée de gamme à une configuration avancée. Vous pouvez désormais prendre une longueur d’avance et bénéficier d’un retour sur investissement rapide pour vos analyses GC-MS réglementées.

 
Référence
ISQ7610-AEI
Taille unitaire
Each
Description
ISQ 7610 Large Turbo, No VPI with AEI
Type de source
Advanced Electron Ionization (AEI) Source for Ultra-Sensitivity and Robustness
Spécifications complètes
Plage de masse1.2–1100 u with unit mass resolution
TypeSingle Quadrupole GC-MS
DétecteursTriple off-axis Thermo Scientific™ DynaMax™ XTEND XR detection system, with off-axis 10 kV dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 110 μA
ModesElectron Impact Ionization (EI), with Full Scan (FS), SIM, and FS/SIM, Simultaneous within the same injection
Capacités de balayageFast Quadrupole Scanning up to 20,000 U/s
Type de sourceAdvanced Electron Ionization (AEI) Source for Ultra-Sensitivity and Robustness
Description de l’articleScalable GC-MS platform, fully upgradable from a base configuration to an advanced highly sensitive configuration
DescriptionISQ 7610 Large Turbo, No VPI with AEI
Stabilité de masseBetter than 0.1 u/48 hours/∆T ≤2 K
Dimensions46 x 36 x 69 cm (18 x 14 x 27 in) (H x W x D)
Mass AnalyzerDual-stage mass filter with off-axis ion guide pre-filter for noise reduction and solid, homogeneous non- coated, maintenance-free quadrupole rods
Unit SizeEach
Référence
Taille unitaire
Each
Description
ISQ 7610 Large Turbo VPI with ExtractaBrite
Type de source
Ultra-Inert ExtractaBrite Ion Source
Spécifications complètes
Plage de masse1.2–1100 u with Unit Mass Resolution
TypeSingle Quadrupole GC-MS
DétecteursTriple off-axis Thermo Scientific™ DynaMax™ XTEND XR detection system, with off-axis 10 kV dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 110 μA
ModesElectron Impact Ionization (EI), with Full Scan (FS), SIM, and FS/SIM, Simultaneous within the same injection, Chemical Ionization (CI), with Positive Ion (PCI) and Negative Ion (NCI) Chemical Ionization, Interchangeable without breaking the vacuum
Capacités de balayageFast Quadrupole Scanning up to 20,000 U/s
Type de sourceUltra-Inert ExtractaBrite Ion Source
Description de l’articleScalable GC-MS platform, fully upgradable from a base configuration to an advanced highly sensitive configuration
DescriptionISQ 7610 Large Turbo VPI with ExtractaBrite
Stabilité de masseBetter than 0.1 u/48 hours/∆T ≤2 K
Dimensions46 x 36 x 69 cm (18 x 14 x 27 in) (H x W x D)
Mass AnalyzerDual-stage mass filter with off-axis ion guide pre-filter for noise reduction and solid, homogeneous non- coated, maintenance-free quadrupole rods
Unit SizeEach
Référence
Taille unitaire
Each
Description
ISQ 7610 Large Turbo, No VPI with AEI
Type de source
Ultra-Inert ExtractaBrite Ion Source
Spécifications complètes
Plage de masse1.2–1100 u with Unit Mass Resolution
TypeSingle Quadrupole GC-MS
DétecteursTriple off-axis Thermo Scientific™ DynaMax™ XTEND XR detection system, with off-axis 10 kV dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 110 μA
ModesElectron Impact Ionization (EI), with Full Scan (FS), SIM, and FS/SIM, Simultaneous within the same injection, Chemical Ionization (CI), with Positive Ion (PCI) and Negative Ion (NCI) Chemical Ionization, Interchangeable without breaking the vacuum
Capacités de balayageFast Quadrupole Scanning up to 20,000 U/s
Type de sourceUltra-Inert ExtractaBrite Ion Source
Description de l’articleScalable GC-MS platform, fully upgradable from a base configuration to an advanced highly sensitive configuration
DescriptionISQ 7610 Large Turbo, No VPI with AEI
Stabilité de masseBetter than 0.1 u/48 hours/∆T ≤2 K
Dimensions46 x 36 x 69 cm (18 x 14 x 27 in) (H x W x D)
Mass AnalyzerDual-stage mass filter with off-axis ion guide pre-filter for noise reduction and solid, homogeneous non- coated, maintenance-free quadrupole rods
Unit SizeEach
Référence
Taille unitaire
Each
Description
ISQ 7610 Large Turbo, No VPI with ExtractaBrite
Type de source
Ultra-Inert ExtractaBrite Ion Source
Spécifications complètes
Plage de masse1.2–1100 u with Unit Mass Resolution
TypeSingle Quadrupole GC-MS
DétecteursTriple off-axis Thermo Scientific™ DynaMax™ XTEND XR detection system, with off-axis 10 kV dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 110 μA
ModesElectron Impact Ionization (EI), with Full Scan (FS), SIM, and FS/SIM, Simultaneous within the same injection
Capacités de balayageFast Quadrupole Scanning up to 20,000 U/s
Type de sourceUltra-Inert ExtractaBrite Ion Source
Description de l’articleScalable GC-MS platform, fully upgradable from a base configuration to an advanced highly sensitive configuration
DescriptionISQ 7610 Large Turbo, No VPI with ExtractaBrite
Stabilité de masseBetter than 0.1 u/48 hours/∆T ≤2 K
Dimensions46 x 36 x 69 cm (18 x 14 x 27 in) (H x W x D)
Mass AnalyzerDual-stage mass filter with off-axis ion guide pre-filter for noise reduction and solid, homogeneous non- coated, maintenance-free quadrupole rods1.2–1100 u with Unit Mass Resolution
Unit SizeEach
Référence
Taille unitaire
Each
Description
ISQ 7610 Small Turbo, No VPI with ExtractaBrite
Type de source
Ultra-Inert ExtractaBrite Ion Source
Spécifications complètes
Plage de masse1.2–1100 u with Unit Mass Resolution
TypeSingle Quadrupole GC-MS
DétecteursTriple off-axis Thermo Scientific™ DynaMax™ XTEND XR detection system, with off-axis 10 kV dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 110 μA
ModesElectron Impact Ionization (EI), with Full Scan (FS), SIM, and FS/SIM, Simultaneous within the same injection
Capacités de balayageFast Quadrupole Scanning up to 20,000 U/s
Type de sourceUltra-Inert ExtractaBrite Ion Source
Description de l’articleScalable GC-MS platform, fully upgradable from a base configuration to an advanced highly sensitive configuration +
DescriptionISQ 7610 Small Turbo, No VPI with ExtractaBrite
Stabilité de masseBetter than 0.1 u/48 hours/∆T ≤2 K
Dimensions46 x 36 x 69 cm (18 x 14 x 27 in) (H x W x D)
Mass AnalyzerDual-stage mass filter with off-axis ion guide pre-filter for noise reduction and solid, homogeneous non- coated, maintenance-free quadrupole rods
Unit SizeEach
Affichage de 5 sur 5
RéférenceSpécificationsTaille unitaireDescriptionType de sourcePrix (EUR)
ISQ7610-AEISpécifications complètes
EachISQ 7610 Large Turbo, No VPI with AEIAdvanced Electron Ionization (AEI) Source for Ultra-Sensitivity and RobustnessDemander un devis
Plage de masse1.2–1100 u with unit mass resolution
TypeSingle Quadrupole GC-MS
DétecteursTriple off-axis Thermo Scientific™ DynaMax™ XTEND XR detection system, with off-axis 10 kV dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 110 μA
ModesElectron Impact Ionization (EI), with Full Scan (FS), SIM, and FS/SIM, Simultaneous within the same injection
Capacités de balayageFast Quadrupole Scanning up to 20,000 U/s
Type de sourceAdvanced Electron Ionization (AEI) Source for Ultra-Sensitivity and Robustness
Description de l’articleScalable GC-MS platform, fully upgradable from a base configuration to an advanced highly sensitive configuration
DescriptionISQ 7610 Large Turbo, No VPI with AEI
Stabilité de masseBetter than 0.1 u/48 hours/∆T ≤2 K
Dimensions46 x 36 x 69 cm (18 x 14 x 27 in) (H x W x D)
Mass AnalyzerDual-stage mass filter with off-axis ion guide pre-filter for noise reduction and solid, homogeneous non- coated, maintenance-free quadrupole rods
Unit SizeEach
ISQ7610-VPISpécifications complètes
EachISQ 7610 Large Turbo VPI with ExtractaBriteUltra-Inert ExtractaBrite Ion SourceDemander un devis
Plage de masse1.2–1100 u with Unit Mass Resolution
TypeSingle Quadrupole GC-MS
DétecteursTriple off-axis Thermo Scientific™ DynaMax™ XTEND XR detection system, with off-axis 10 kV dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 110 μA
ModesElectron Impact Ionization (EI), with Full Scan (FS), SIM, and FS/SIM, Simultaneous within the same injection, Chemical Ionization (CI), with Positive Ion (PCI) and Negative Ion (NCI) Chemical Ionization, Interchangeable without breaking the vacuum
Capacités de balayageFast Quadrupole Scanning up to 20,000 U/s
Type de sourceUltra-Inert ExtractaBrite Ion Source
Description de l’articleScalable GC-MS platform, fully upgradable from a base configuration to an advanced highly sensitive configuration
DescriptionISQ 7610 Large Turbo VPI with ExtractaBrite
Stabilité de masseBetter than 0.1 u/48 hours/∆T ≤2 K
Dimensions46 x 36 x 69 cm (18 x 14 x 27 in) (H x W x D)
Mass AnalyzerDual-stage mass filter with off-axis ion guide pre-filter for noise reduction and solid, homogeneous non- coated, maintenance-free quadrupole rods
Unit SizeEach
ISQ7610-VPICISpécifications complètes
EachISQ 7610 Large Turbo, No VPI with AEIUltra-Inert ExtractaBrite Ion SourceDemander un devis
Plage de masse1.2–1100 u with Unit Mass Resolution
TypeSingle Quadrupole GC-MS
DétecteursTriple off-axis Thermo Scientific™ DynaMax™ XTEND XR detection system, with off-axis 10 kV dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 110 μA
ModesElectron Impact Ionization (EI), with Full Scan (FS), SIM, and FS/SIM, Simultaneous within the same injection, Chemical Ionization (CI), with Positive Ion (PCI) and Negative Ion (NCI) Chemical Ionization, Interchangeable without breaking the vacuum
Capacités de balayageFast Quadrupole Scanning up to 20,000 U/s
Type de sourceUltra-Inert ExtractaBrite Ion Source
Description de l’articleScalable GC-MS platform, fully upgradable from a base configuration to an advanced highly sensitive configuration
DescriptionISQ 7610 Large Turbo, No VPI with AEI
Stabilité de masseBetter than 0.1 u/48 hours/∆T ≤2 K
Dimensions46 x 36 x 69 cm (18 x 14 x 27 in) (H x W x D)
Mass AnalyzerDual-stage mass filter with off-axis ion guide pre-filter for noise reduction and solid, homogeneous non- coated, maintenance-free quadrupole rods
Unit SizeEach
ISQ7610-NOVPISpécifications complètes
EachISQ 7610 Large Turbo, No VPI with ExtractaBriteUltra-Inert ExtractaBrite Ion SourceDemander un devis
Plage de masse1.2–1100 u with Unit Mass Resolution
TypeSingle Quadrupole GC-MS
DétecteursTriple off-axis Thermo Scientific™ DynaMax™ XTEND XR detection system, with off-axis 10 kV dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 110 μA
ModesElectron Impact Ionization (EI), with Full Scan (FS), SIM, and FS/SIM, Simultaneous within the same injection
Capacités de balayageFast Quadrupole Scanning up to 20,000 U/s
Type de sourceUltra-Inert ExtractaBrite Ion Source
Description de l’articleScalable GC-MS platform, fully upgradable from a base configuration to an advanced highly sensitive configuration
DescriptionISQ 7610 Large Turbo, No VPI with ExtractaBrite
Stabilité de masseBetter than 0.1 u/48 hours/∆T ≤2 K
Dimensions46 x 36 x 69 cm (18 x 14 x 27 in) (H x W x D)
Mass AnalyzerDual-stage mass filter with off-axis ion guide pre-filter for noise reduction and solid, homogeneous non- coated, maintenance-free quadrupole rods1.2–1100 u with Unit Mass Resolution
Unit SizeEach
ISQ7610-STNOVPISpécifications complètes
EachISQ 7610 Small Turbo, No VPI with ExtractaBriteUltra-Inert ExtractaBrite Ion SourceDemander un devis
Plage de masse1.2–1100 u with Unit Mass Resolution
TypeSingle Quadrupole GC-MS
DétecteursTriple off-axis Thermo Scientific™ DynaMax™ XTEND XR detection system, with off-axis 10 kV dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 110 μA
ModesElectron Impact Ionization (EI), with Full Scan (FS), SIM, and FS/SIM, Simultaneous within the same injection
Capacités de balayageFast Quadrupole Scanning up to 20,000 U/s
Type de sourceUltra-Inert ExtractaBrite Ion Source
Description de l’articleScalable GC-MS platform, fully upgradable from a base configuration to an advanced highly sensitive configuration +
DescriptionISQ 7610 Small Turbo, No VPI with ExtractaBrite
Stabilité de masseBetter than 0.1 u/48 hours/∆T ≤2 K
Dimensions46 x 36 x 69 cm (18 x 14 x 27 in) (H x W x D)
Mass AnalyzerDual-stage mass filter with off-axis ion guide pre-filter for noise reduction and solid, homogeneous non- coated, maintenance-free quadrupole rods
Unit SizeEach
Affichage de 5 sur 5

Augmentez la disponibilité de votre instrument
Éliminez les temps d’arrêt non planifiés et inutiles de l’instrument et optimisez la productivité pour atteindre une efficacité sans précédent, jour après jour. Le système de GC-MS à simple quadripôle ISQ 7610 allie robustesse et possibilité de remplacer la colonne GC et de nettoyer la source d’ions sans interrompre vos flux de travaux analytiques.


Optimisez le débit d’échantillons
Lorsqu’un débit d’échantillons élevé est essentiel, le système fournit des résultats dans les délais impartis et en toute simplicité. Les flux de travaux automatisés et le fonctionnement simplifié de l’instrument permettent à chaque utilisateur de produire des résultats constants, échantillon après échantillon. La plage linéaire étendue permet la consolidation des méthodes afin que vous puissiez analyser plus de composés à des concentrations variables en un seul cycle.


Bénéficiez d’un retour sur investissement rapide
Pour obtenir un retour sur investissement rapide, votre système doit fournir des résultats dès qu’il est installé. Grâce à son intelligence intégrée qui simplifie la configuration de l’instrument, les méthodes analytiques et le fonctionnement quotidien, le système GC-MS à simple quadripôle ISQ 7610 est conçu pour un déploiement accéléré. La réduction des besoins de formation des opérateurs, du temps nécessaire pour atteindre une productivité maximale et le débit d’échantillons maximal permettent un retour sur investissement rapide de votre instrument.

Figures

Documentation et téléchargements

Certificats

    Foire aux questions (FAQ)

    Citations et références

    Search citations by name, author, journal title or abstract text