Invitrogen™

Plateau d’incubation, 10 x 14 cm

Le plateau d’incubation permet une coloration pratique et uniforme des transferts E-PAGE™. Le plateau est de 10 cm (l) xAfficher plus

Référence	Quantité
LC2102	8 de chaque

Référence LC2102

Prix (EUR)

136,65

Online Exclusive

157,00

Économisez 20,35 (13%)

Quantité:

8 de chaque

Prix (EUR)

136,65

Online Exclusive

157,00

Économisez 20,35 (13%)

Le plateau d’incubation permet une coloration pratique et uniforme des transferts E-PAGE™. Le plateau est de 10 cm (l) x 14 cm (L) x 3 cm (P) avec un couvercle. Il convient à une utilisation avec des colorations d’immunodétection ou de transfert.

Usage exclusivement réservé à la recherche. Ne pas utiliser pour des procédures de diagnostic.

Spécifications

Quantité8 de chaque

Conditions d’expéditionTempérature ambiante

Gamme de produitsNovex

Type de produitPlateau d’incubation

Unit SizeEach

Contenu et stockage

Chaque boîte de plateaux d’incubation fournit 8 couvercles et 8 plateaux en plastique.Conserver à température ambiante.

Foire aux questions (FAQ)

If a green color appears on the membrane after the transfer using the iBlot 2 Dry Blotting System, will it affect the results?

The green discoloration is copper deposits from the transfer stack, and it does not affect the results. To minimize this effect, shake excess water off the filter paper and buffer from the gel before placing each on the stack. The current formulation of stacks minimizes the green discoloration.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

Can I cut the bottom stack of my iBlot 2 Transfer Stack to fit my separating gel?

No. Do not trim the iBlot 2 Transfer Stacks to fit your gel size.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

Is the PVDF membrane in the iBlot 2 PVDF Gel Transfer Stack pre-activated?

The PVDF membrane is pre-activated and ready for use without any pre-treatment with alcohol.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

Can I use the stack and/or absorbent pad more than once when using the iBlot 2 Dry Blotting System?

No. The transfer stacks have a finite amount of ions to drive the transfer and are depleted after a single use.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

Can I perform multiple transfers, with a new transfer starting immediately after the previous one when using the iBlot 2 Dry Blotting System?

Yes. The device is designed to do so with no impact on performance.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

View all Plateau d’incubation, 10 x 14 cm FAQs