ReadyProbes™ Streptavidin/Biotin Blocking Solution (1X)
Invitrogen™

ReadyProbes™ Streptavidin/Biotin Blocking Solution (1X)

La solution de blocage de la streptavidine/biotine ReadyProbes bloque la biotine endogène, les récepteurs de la biotine et les sitesAfficher plus
Have Questions?
RéférenceQuantité
R376281 kit
Référence R37628
Prix (EUR)
184,65
Online Exclusive
210,00
Économisez 25,35 (12%)
Each
Quantité:
1 kit
Prix (EUR)
184,65
Online Exclusive
210,00
Économisez 25,35 (12%)
Each
La solution de blocage de la streptavidine/biotine ReadyProbes bloque la biotine endogène, les récepteurs de la biotine et les sites de liaison de la streptavidine présents dans de nombreux types de tissus, réduisant le signal de fond dans les procédures d’immunohistochimie (IHC), d’immunocytochimie (ICC), d’immunofluorescence (IF) et d’hybridation in situ (ISH). Cette solution à deux composants (une solution de blocage de streptavidine et une solution de blocage de biotine) est fournie dans un format prêt à l’emploi. Ajoutez quelques gouttes de la composante de streptavidine et laissez incuber pendant 15 minutes, puis lavez et répétez avec la composante biotine. La solution de blocage de streptavidine/biotine ReadyProbes est utilisée après le blocage des cellules/tissus avec une solution de blocage standard non spécifique (par exemple, du sérum dilué), mais avant l’étape de l’anticorps primaire.
Usage exclusivement réservé à la recherche. Ne pas utiliser pour des procédures de diagnostic.
Spécifications
Type de produitSolution de blocage
Conditions d’expéditionHomologué pour des expéditions à température ambiante ou sur glace mouillée
Gamme de produitsReadyProbes
Quantité1 kit
Unit SizeEach
Contenu et stockage
Un kit contenant 18 ml de solutions prêtes à l’emploi (1X) de streptavidine (composant A) et de biotine (composant B) dans deux flacons en PEBD transparents.

Stocker (entre 2°C à 8°C.

Lorsque le produit est stocké comme indiqué, il peut être utilisé pendant 6 mois après réception.

)

Foire aux questions (FAQ)

What is the volume for one drop from the ReadyProbes dropper bottles?

The volume for one drop from the ReadyProbes dropper bottles is approximately 41 µL.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

In the ReadyProbes Streptavidin/Biotin Blocking Solution (1X) protocol, why is there a step to add biotin to the sample?

The first step in this kit is to bind all endogenous biotinylated entities with an unlabeled streptavidin. The free D-biotin is added to bind to all biotin binding sites on the added streptavidin. The free biotin will be washed away before any other labels are added and all biotin binding sites will be occupied on the unlabeled streptavidin.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

I am labeling cells with a biotinylated primary antibody, followed by a streptavidin dye conjugate, but I'm getting non-specific mitochondrial labeling, even with a streptavidin-only control. Why?

Mitochondria have endogenous biotin, which is being labeled by the streptavidin. You will need to block the endogenous biotin first, after you fix and permeabilize, but before you block for your primary antibody.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

How is ReadyProbes Streptavidin/Biotin Blocking Solution (1X) different from other endogenous biotin blocking kits?

The only difference between the ReadyProbes Streptavidin/Biotin Blocking Solution (1X) and other endogenous biotin blocking kits is the use of streptavidin (as other kits use avidin) and the ease of use. In the ReadyProbes Streptavidin/Biotin Blocking Solution (1X), we provide the two components already pre-mixed and ready to use.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.