Marcador de proteína MW sin teñir Pierce™
Marcador de proteína MW sin teñir Pierce™
Thermo Scientific™

Marcador de proteína MW sin teñir Pierce™

El marcador de peso molecular de proteínas sin teñir Thermo Scientific es una mezcla de siete proteínas nativas (de 14,4Más información
Have Questions?
Número de catálogoCantidad
266102 x 1 ml
Número de catálogo 26610
Precio (MXN)
-
Cantidad:
2 x 1 ml
Pedido a granel o personalizado
El marcador de peso molecular de proteínas sin teñir Thermo Scientific es una mezcla de siete proteínas nativas (de 14,4 kDa a 116 kDa) para usar como patrones de tamaño en la electroforesis de proteínas (SDS-PAGE)

Compare y visualice todos los demás patrones y escaleras de proteínas ›

Aplicaciones
• Dimensionamiento preciso de proteínas en geles de poliacrilamida-SDS e inmunotransferencia (Western blots)

Para uso exclusivo en investigación. No apto para uso en procedimientos diagnósticos.
Especificaciones
Compatibilidad del gelGeles Bolt™ Bis-Tris Plus, Geles de tricina Novex™, geles de Tris-glicina Novex™, geles NuPAGE™ Bis-Tris, geles de Tris-acetato NuPAGE™, geles SDS-PAGE
Peso molecular116, 66,2, 45, 35, 25, 18,4 y 14,4 kDa
Línea de productosPierce
Tipo de productoMarcadores moleculares de proteínas
Cantidad2 x 1 ml
Listo para cargarSí
Condiciones de envíoAprobado para su envío en hielo húmedo o seco
Tipo de tinciónSin teñir
Tipo de sistemaWestern Blotting, SDS-PAGE
Number of Markers7
Intervalo de tamañosDe 14,4 a 116 kDa
Unit SizeEach
Contenido y almacenamiento
Contenido: dos viales de 1 ml cada uno

Tampón de almacenamiento: 62,5 mM Tris-H3PO4 (pH 7,5 a 25 °C), 1 mM EDTA, 2 % SDS, 50 mM DTT, 30 mM NaCl, 0,01 % azul de bromofenol y 50 % glicerol

Almacenamiento: Tras su recepción, almacenar a -20 °C

Preguntas frecuentes

The upper bands of the ladder are missing. What could be the reason?

The upper bands of the ladder may be degraded by proteases. Ladder, gel, buffer, pipettes, pipette tips, or equipment can be contaminated by proteases during usage. A general recommendation would be to avoid working with proteases in the same room. We would recommend preparing fresh solutions, cleaning the equipment, and using clean pipettes and tips. If the ladder itself is contaminated, please use a new tube of the ladder.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Some additional bands or smears were observed on the gel when using a PageRuler unstained ladder. What may have caused this?

Additional bands can appear due to dithiothreitol (DTT) oxidation in the storage buffer. Please add newly prepared DTT solution to the final concentration of 100 mM and boil for 5 min at 95 degrees C. This should solve the issue. Addition of DTT is NOT recommended for prestained protein ladders, since too high a concentration of reducing agents can cause protein destaining.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Do the proteins in Thermo Scientific protein ladders have a His-Tag or would otherwise react with an anti-His-Tag antibody?

No, proteins in Thermo Scientific protein ladders are not His tagged. However, non-specific interaction between the ladder proteins and primary or secondary antibodies is possible and some His-Tag detection systems, such as Thermo Scientific 6xHis Protein Tag Stain Reagent Kit, show non-specific interaction. The protein ladder bands are more readily detected when using high antibody concentrations. The non-specific cross-reactivity is difficult to predict, it often has a different pattern dependent on the antibodies used in each individual experiment. The most general way to handle this problem would be to use lower concentrations of antibodies and to use lower amount of protein ladders. It may also be useful to leave one empty well between the ladder and the sample to overcome a possible leakage of the signal to the nearby sample lane.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Can Thermo Scientific protein ladders be detected by Strep-Tactin conjugates?

PageRuler Unstained protein ladders can be detected directly on Western blots by using Strep-Tactin conjugates or an antibody against the Strep-tag II sequence. All PageRuler and Spectra ladder proteins contain an integral Strep-tag II sequence, however the prestained ladders cannot be detected by Strep-Tactin conjugates.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

Why is non-specific binding detected after Western blot?

Protein ladder bands can sometimes be detected with chemiluminescent techniques due to non-specific interactions of ladder proteins with either primary or secondary antibodies (or with both). The ladder bands are only rarely detected by chromogenic substrates. The extremely high sensitivity of the chemiluminescent assays is needed to see the bands, so the actual degree of cross-reactivity is low. The non-specific cross-reactivity is difficult to predict, it often has a different pattern depending on the antibodies used. If antibodies recognize a linear epitope, the cross-reactivity may be due to sequence homology. If antibodies react with a denaturation-resistant conformational epitope it could be impossible to identify the exact reason for detected cross-reactivity. The most general way to handle this problem would be to use lower concentrations of antibodies.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

View all Marcador de proteína MW sin teñir Pierce™ FAQs