Dynabeads™ Oligo(dT)25
Dynabeads&trade; Oligo(dT)<sub>25</sub>
Invitrogen™

Dynabeads™ Oligo(dT)25

Dynabeads™ Oligo(dT)25 Beads für die mRNA-Isolierung fangen gezielt mRNA-Moleküle aus nahezu jeder Rohprobe ein. Dies bedeutet, dass keine Aufreinigung vonWeitere Informationen
Have Questions?
Ansicht ändernbuttonViewtableView
KatalognummerMenge
610055 ml
610022 ml
Katalognummer 61005
Preis (EUR)
832,00
Each
Zum Warenkorb hinzufügen
Menge:
5 ml
Preis (EUR)
832,00
Each
Zum Warenkorb hinzufügen
Dynabeads™ Oligo(dT)25 Beads für die mRNA-Isolierung fangen gezielt mRNA-Moleküle aus nahezu jeder Rohprobe ein. Dies bedeutet, dass keine Aufreinigung von Gesamt-RNA erforderlich ist, wenn mRNA die gewünschte informationstragende Nukleinsäure ist. Da mRNA nur etwa 1 bis 5 % der gesamten RNA in der Zelle ausmacht, stellt eine Isolierung der Gesamt-RNA nicht die effizienteste Option für die Isolierung von mRNA dar. Andere Technologien, die für die Aufreinigung von Gesamt-RNA bestimmt sind, erzielen eine Ausbeute von ∼ 80 % ribosomaler RNA. Das führt dazu, dass mRNA mit ribosomaler RNA, Transfer-RNA, Mikro-RNA, kleiner nukleärer RNA (snRNA) und kleiner zytoplasmatischer RNA (scRNA) um die Membranbindung konkurrieren muss. Vorteile von Dynabeads™ Oligo(dT)25 Beads:

• Schnelles und schonendes Verfahren zur Gewinnung reiner und intakter mRNA
• Isolierung extrem reiner mRNA, die beste Wahl vor der cDNA-Synthese
• Hochempfindliche mRNA-Isolierung ermöglicht die cDNA-Synthese und Erstellung einer cDNA-Bibliothek auch aus kleinsten Ausgangsproben (Erstellung einer cDNA-Bibliothek aus einer einzigen Zelle möglich)

Funktionsweise der Beads
Die Oligo(dT)25-beschichteten Dynabeads™ fangen spezifisch mRNA-Transkriptome aus einer Vielzahl an Rohausgangsproben ein. Ribosomale RNA, DNA, Proteine und kleine RNA-Moleküle (z. B. Transfer RNA, Mikro-RNA und kleine nukleoläre RNA) binden nicht an die Beads und werden entsorgt. Nur polyadenylierte RNA-Spezies (mRNA) werden eingefangen. Die isolierte mRNA liegt in reiner Form vor, sodass nach der Extraktion weder ribosomale RNA entfernt werden muss, noch eine DNase-Behandlung erforderlich ist. Dieses säulenfreie System garantiert die höchste Transkriptom-Wiederfindung:

• Einfangen der mRNA auf mobilen magnetischen Beads
• Schnelle und schonende magnetische Handhabungsverfahren
• Kein mRNA-Verlust bei Zentrifugationen mit hoher g-Zahl
• Keine mRNA während der Elution in Säulenmembranen abgefangen

Anwendungen
mRNA eignet sich für alle molekularen Downstream-Prozesse, insbesondere für Genklonierung, cDNA-Synthese, cDNA-Bibliothekserstellung, RT-PCR, quantitative RT-PCR, RPA (Ribonuklease-Schutzassay), subtraktive Hybridisierung, Primer-Extension, SAGE, RACE und andere. Dynabeads™ Oligo(dT)25 Beads für die mRNA-Isolierung bieten das ideale Verfahren zur Aufreinigung von mRNA vor der Erstellung einer cDNA-Bibliothek. Der Einsatz der Beads gewährleistet höchste Wiederfindung und Anreicherung des Transkriptoms. Das Transkriptom wird mit diesen Beads vollständiger eingefangen als mit Methoden möglich ist, die vor der mRNA-Isolierung eine Isolierung der Gesamt-RNA vorsehen.

Vielseitige Elutionsoptionen
Die Elution kann in jedem beliebigen Volumen bis zu mindestens 5 μl durchgeführt werden. Die mRNA-Elution ist optional, da enzymatische Reaktionen in den Downstream-Verfahren nicht durch Dynabeads gehemmt werden.™ Zusätzlich kann eine cDNA-Synthese direkt auf den Beads durchgeführt werden, um eine wiederverwendbare Festphasen-cDNA-Bibliothek zu erstellen.
Nur für Forschungszwecke. Darf nicht für diagnostische Verfahren eingesetzt werden.
Specifications
Elutionsvolumen10 bis 20 μl
EndprodukttypmRNA
Zur Verwendung mit (Anwendung)RNA-Extraktion
Hochdurchsatz-KompatibilitätGeeignet für hohe Durchsätze
LigandentypOligo-dT
Aufreinigungszeit15 min.
Menge5 ml
VersandbedingungRaumtemperatur
AusgangsmaterialmengeCells: ≤106
Plant: ≤100 mg
Tissue: ≤50 mg
Total RNA: ≤75 μg
Ertrag10 μg mRNA per 1 mL of beads (Binding capacity)
Isolation TechnologyMagnetic Bead
Unit SizeEach
Inhalt und Lagerung
Bei 2 bis 8 °C lagern.

Häufig gestellte Fragen (FAQ)

I am getting DNA contamination after mRNA isolation using Dynabeads magnetic beads. Why is this?

There are several reasons why DNA contamination may occur:

- Incomplete DNA shearing.
- Incomplete removal of sample lysate after the hybridization step.
- Insufficient washing and/or removal of wash buffers.
- The ratio of sample to beads was too high.

I am getting rRNA contamination after mRNA isolation using Dynabeads magnetic beads. What should I do?

Ribosomal RNA is effectively eliminated by reextracting the mRNA from the eluate. Reuse the same Dynabeads Oligo(dT)25 beads that were used for the original isolation. Wash the beads twice in Washing Buffer B. Dilute the eluted mRNA with 4 times its volume of Lysis/Binding Buffer, then add the beads. Incubate with mixing at room temperature for 3-5 minutes, then continue with the Direct mRNA Isolation Protocol.

How long can I leave the isolated mRNA on Dynabeads Oligo(dT)25 magnetic beads?

We recommend immediate use of Dynabeads magnetic beads-mRNA complex or eluted mRNA for cDNA synthesis, in RT-PCR, or for other downstream applications. If storage is needed, we recommend you elute the mRNA from the beads using 10 mM Tris-HCl buffer (pH 7.5) and freeze it(-80°C). It is very important that all equipment and samples are RNase free.

My Dynabeads magnetic beads are not pelleting well with the magnet. Do you have any suggestions for me?

Please review the following possibilities for why your Dynabeads magnetic beads are not pelleting:

- The solution is too viscous.
- The beads have formed aggregates because of protein-protein interaction.

Try these suggestions: - Increase separation time (leave tub on magnet for 2-5 minutes)
- Add DNase I to the lysate (~0.01 mg/mL)
- Increase the Tween 20 concentration to ~0.05% of the binding and/or washing buffer.
- Add up to 20 mM beta-merecaptoethanol to the binding and/or wash buffers.

Find additional tips, troubleshooting help, and resources within our Dynabeads Nucleic Acid Purification Support Center.

Can I use Dynabeads Oligo(dT)25 magnetic beads in real-time PCR?

Dynabeads magnetic beads are compatible with TaqMan real-time PCR chemistry and non-capillary real-time PRC instruments. However, Dynabeads magnetic beads exhibit a low level of autofluorescence that can increase the intensity of the fluorescent signal to some degree. This can be compensated for by using a Dynabeads magnetic beads and water background in the instrument. Then background signal intensity can be subtracted from the sample signal intensity in all subsequent real-time PCR experiments containing Dynabeads magnetic beads. Alternatively, when using the standard curve method of analysis, an appropriate amount of Dynabeads magnetic beads can be added to each sample used to construct the standard curve.

Zitierungen und Referenzen (5)

Zitierungen und Referenzen
Abstract
Purification of mRNA directly from crude plant tissues in 15 minutes using magnetic oligo dT microspheres.
Authors:Jakobsen KS, Breivold E, Hornes E
Journal:Nucleic Acids Res
PubMed ID:2362831
Induction of nitric oxide synthase mRNA in coronary resistance arteries isolated from exercise-trained pigs.
Authors:Woodman CR, Muller JM, Laughlin MH, Price EM
Journal:Am J Physiol
PubMed ID:9435589
The purpose of this study was to develop a method by which endothelial cell nitric oxide synthase (ecNOS) mRNA expression could be measured in single coronary resistance arteries and to test the hypothesis that ecNOS gene expression is upregulated by exercise training. Yucatan miniature swine were randomly assigned to exercise-trained ... More
Disruption of imprinted gene methylation and expression in cloned preimplantation stage mouse embryos.
Authors:Mann MR, Chung YG, Nolen LD, Verona RI, Latham KE, Bartolomei MS
Journal:Biol Reprod
PubMed ID:12748125
Cloning by somatic cell nuclear transfer requires that epigenetic information possessed by the donor nucleus be reprogrammed to an embryonic state. Little is known, however, about this remodeling process, including when it occurs, its efficiency, and how well epigenetic markings characteristic of normal development are maintained. Examining the fate of ... More
Selective loss of imprinting in the placenta following preimplantation development in culture.
Authors:Mann MR, Lee SS, Doherty AS, Verona RI, Nolen LD, Schultz RM, Bartolomei MS
Journal:Development
PubMed ID:15240554
Preimplantation development is a period of dynamic epigenetic change that begins with remodeling of egg and sperm genomes, and ends with implantation. During this time, parental-specific imprinting marks are maintained to direct appropriate imprinted gene expression. We previously demonstrated that H19 imprinting could be lost during preimplantation development under certain ... More
In vitro characterization of somatostatin receptors in the human thymus and effects of somatostatin and octreotide on cultured thymic epithelial cells.
Authors:Ferone D, van Hagen PM, van Koetsveld PM, Zuijderwijk J, Mooy DM, Lichtenauer-Kaligis EG, Colao A, Bogers AJ, Lombardi G, Lamberts SW, Hofland LJ
Journal:Endocrinology
PubMed ID:9886848
Somatostatin (SS) and its analogs exert inhibitory effects on secretive and proliferative processes of various cells via high affinity SS receptors (SS-R). SS analogs bind with different affinity to the five cloned SS-R subtypes. Octreotide, an octapeptide SS analog, binds with high affinity to the SS-R subtype 2 (sst2). SS-R ... More