High Resolution Melt Software v3.2
High Resolution Melt Software v3.2
Applied Biosystems™

High Resolution Melt Software v3.2

Die High Resolution Melt Software v3.2 ist ein brandneues, hervorragendes Werkzeug für hochauflösende Schmelzkurvenanalysen (High Resolution Melt, HRM).Die HRM-Analyse wirdWeitere Informationen
Have Questions?
Ansicht ändernbuttonViewtableView
KatalognummerInhalt und Lagerung
A30150
A29881
Katalognummer A30150
Preis (EUR)
1.838,00
Each
Zum Warenkorb hinzufügen
Preis (EUR)
1.838,00
Each
Zum Warenkorb hinzufügen

Die High Resolution Melt Software v3.2 ist ein brandneues, hervorragendes Werkzeug für hochauflösende Schmelzkurvenanalysen (High Resolution Melt, HRM).Die HRM-Analyse wird nach der PCR-Analysemethode zur Identifizierung der Variation in Nukleinsäuresequenzen angewendet.Die Methode basiert auf dem Nachweis kleiner Unterschiede in PCR-Schmelz-(Dissoziations-)Kurven.Sie wird durch hochhelle dsDNA-bindende Farbstoffe ermöglicht, die in Verbindung mit Echtzeit-PCR-Instrumenten verwendet werden. Diese Geräte verfügen über eine präzise Temperaturrampensteuerung, erweiterte Datenerfassungsfunktionen und Zugriff auf Software, die speziell für HRM-Analysen entwickelt wurde.Die High Resolution Melt Software v3.2 sorgt für HRM in den QuantStudio 1, QuantStudio 3 und 5, StepOne und StepOnePlus Echtzeit-PCR-Systemen und im 7500 Fast Echtzeit-PCR-System und enthält Funktionen, die schnelle und genaue HRM-Ergebnisse noch besser zugänglich machen als je zuvor.

Wichtigste Produktmerkmale:

• Minimale Anwendereingabe zum Erzielen von Ergebnissen: die Software wendet beim Öffnen einer Versuchsdatei automatisch Standard-/gespeicherte Analyseeinstellungen an•
Einfacher Wiederaufruf: die neue Bibliothek für Analyseeinstellungen speichert Einstellungen für zukünftige Experimente•
Größere Genauigkeit: der Clustering-Algorithmus unterscheidet präzise Kontroll- und Variantengenotypen•
Erhöhte Empfindlichkeit: die Software ermöglicht die Eingabe der erwarteten Anzahl von Clustern für schwer zu ermittelnde SNPs (Klasse 4)•
Fähigkeit, mehr in einem Durchgang zu erreichen: getrennte Analyse mehrerer auf einer einzigen Platte durchgeführter Assays•
Abkürzungen für den Versuchsaufbau: direkte Kopier- und Einfügefunktionen mit Excel; Well-Informationen und Plattenlayout werden in der Plattenansicht übersichtlich dargestellt

Minimieren Sie die Anwendereingaben zur Erzielung von Ergebnissen und rufen Sie Analyseeinstellungen leicht wieder auf
Die High Resolution Melt Software v3.2 wendet beim Öffnen einer Experimentdatei automatisch Standard- oder gespeicherte Analyseeinstellungen an, wodurch der Anwender Ergebnisse mit minimalen Eingaben erzielen kann.Es enthält außerdem eine neue Bibliothek für Analyseeinstellungen, mit der der Benutzer optimierte Einstellungen speichern und sie für zukünftige Experimente einfach abrufen kann.

Erzielen Sie größere Genauigkeit und erhöhen Sie Ihre Empfindlichkeit
Die Software v3.2 verwendet einen verbesserten Clustering-Algorithmus, der die genaue Unterscheidung von Kontroll- und Variantengenotypen ermöglicht und dem Anwender ermöglicht, die erwartete Anzahl von Clustern einzugeben, um die Empfindlichkeit für schwierige SNP-Genotypisierung zu erhöhen.

Erreichen Sie mehr in einem Durchlauf
Mit der Software v3.2 können Sie jetzt separate Analysen mehrerer Assays auf einer einzigen Platte durchführen.

Schnelle Inbetriebnahme von Experimenten mit Abkürzungen in der Einrichtung
Anwender der High Resolution Melt Software v3.2 können direkt aus Excel-Tabellen kopieren und einfügen, um Experimente schnell einzurichten.Die Plattenansicht zeigt außerdem gut sichtbare Informationen und das Plattenlayout an, um die Platteneinrichtung zu erleichtern.

Nur für Forschungszwecke. Nicht zur Verwendung bei diagnostischen Verfahren.
Specifications
Zur Verwendung mit (Geräte)7500 Fast System, QuantStudio™ 1, QuantStudio™ 3, QuantStudio™ 5, StepOnePlus™ System, StepOne™ System
Menge1 license
VersandbedingungRaumtemperatur
Unit SizeEach
Inhalt und Lagerung
Mit Lizenzschlüssel für 1 Benutzer

Häufig gestellte Fragen (FAQ)

What ramp mode should I use for HRM experiments using the QuantStudio 3 and QuantStudio 5 Real-Time PCR Systems?

We recommend using Continuous mode (set to 0.025 degrees C/sec) for HRM experiments. You can also choose “Number of Data Points per Degree”, but if you do so, make sure to collect at least 10 points per degree so that there is enough data for analysis. When in Continuous mode, the instrument uses a fixed ramp rate for the melt step and captures as many data points as possible within the time permitted. When in Data Point Per Degree mode, the instrument adjusts the step and hold for the melt step to achieve the specified number of data points.

Find additional tips, troubleshooting help, and resources within our Real-Time PCR and Digital PCR Instruments Support Center.

What calibrate plate can I use for High Resolution Melt (HRM) analysis on the QuantStudio 3 and QuantStudio 5 Real-Time PCR Systems?

We recommend using our MeltDoctor HRM Calibration plates. Use the plate type that matches the block on your QuantStudio 3 or QuantStudio 5 Real-Time PCR System:

0.1 mL, 96-Well: Cat. No. 4425618
384-Well: Cat. No. 4425559
0.2 mL, 96-well: Cat. Nos. 4425562 and 4425557 (Note: We do not have a 0.2 mL calibration plate, but you can make one by combining the MeltDoctor HRM Calibration Standard with the MeltDoctor HRM Reagent Kit)

Find additional tips, troubleshooting help, and resources within our Real-Time PCR and Digital PCR Instruments Support Center.

Are the QuantStudio 3 and QuantStudio 5 Real-Time PCR Systems compatible with High Resolution Melt (HRM) experiments?

Yes, you can perform HRM experiments on the QuantStudio 3 and QuantStudio 5 Real-Time PCR Systems. The data can either be analyzed in the HRM v3.1 Software (Cat. No. A30150), or in the Thermo Fisher Cloud HRM Analysis Application. Please see here (https://tools.thermofisher.com/content/sfs/manuals/MAN0014394_HighResMeltExperiment_GSG.pdf) for the user manual (with Cloud workflow). Note: QuantStudio 3/QuantStudio 5 Real-Time PCR System firmware version 1.1 or later is required to perform HRM experiments.

Find additional tips, troubleshooting help, and resources within our Real-Time PCR and Digital PCR Instruments Support Center.

What are the license renewal requirements for the High Resolution Melt (HRM) software?

If you are using the QuantStudio 3/QuantStudio 5 Real-Time PCR Systems, 7500 Real-Time PCR System (with SDS v2.0.5 or later), or StepOne/StepOnePlus Real Time PCR Systems, you can purchase High Resolution Melt (HRM) Software v3.1 (https://www.thermofisher.com/order/catalog/product/A30150?ICID=search-product). Once activated, this software will not require annual renewal. If you have the older HRM software v3.0.1 (for use with StepOne Plus, StepOne or the 7500 Fast (SDS v2.0.5 or later) Real-Time PCR System, it will require license renewal on an annual basis. For use on the 7900HT Fast Real-Time PCR System, please use HRM Software v2.0.1 (https://www.thermofisher.com/order/catalog/product/4397808?ICID=search-product). This software will require license renewal on an annual basis. When using either the ViiA 7, QuantStudio 6/QuantStudio 7 or QuantStudio 12K Flex Real-Time PCR Systems, the HRM software is already included in the instrument's application software, but requires activation of the HRM module within the instrument software by purchase of the license. This license requires an annual renewal.

Find additional tips, troubleshooting help, and resources within our Real-Time PCR and Digital PCR Instruments Support Center.

Where can I find information regarding High Resolution Melt (HRM) software v3.1 and HRM software for use on the QuantStudio 3 and QuantStudio 5 Real-Time PCR Systems?

For more information about HRM software v3.1 and HRM software for use on the QuantStudio 3 and QuantStudio 5 Real-Time PCR Systems, please go here (http://tools.thermofisher.com/content/sfs/manuals/MAN0014394_HighResMeltExperiment_GSG.pdf).

Find additional tips, troubleshooting help, and resources within our Real-Time PCR and Digital PCR Instruments Support Center.