GeneTitan™ Hybridization, Wash, and Stain Kit for WT Array Plates
FWS 제품은 특정 승인이 필요하므로 배송이 약 2-3주 더 소요됩니다.
Product Image
Applied Biosystems™

GeneTitan™ Hybridization, Wash, and Stain Kit for WT Array Plates

The GeneTitan™ Hybridization, Wash, and Stain Kit for WT Arrays contains pre-formulated solutions to process WT array plates on the자세히 알아보기
Have Questions?
보기 방식 변경buttonViewtableView
카탈로그 번호수량
90162296 Reactions
905102384 Reactions
카탈로그 번호 901622
제품 가격(KRW)
1,910,000
Each
카트에 추가하기
수량:
96 Reactions
제품 가격(KRW)
1,910,000
Each
카트에 추가하기
The GeneTitan™ Hybridization, Wash, and Stain Kit for WT Arrays contains pre-formulated solutions to process WT array plates on the GeneTitan™ System. The reagents are formulated into the fewest number of individual components possible, reducing preparation and handling steps. With enhanced performance, fewer required reagents, and a simple protocol, target preparation has never been so easy.

The GeneTitan Hybridization, Wash, and Stain Kit for WT Arrays includes two boxes:

The first box contains sufficient amounts of the hybridization and stain components to process one 96-array plate, four 24-array plates, or six 16-array plates. The hybridization components include the solutions required for preparation of the hybridization cocktail containing the target. The stain components include Stain Cocktail 1 and 3, Stain Cocktail 2, and the Array Holding Buffer. These solutions are used during the processing of the arrays in the GeneTitan System.

The second box includes Wash Buffer A and Wash Buffer B, also required for the processing of the arrays. There is sufficient Wash Buffer A and B to process one plate in any format. For each additional plate that is processed, an additional Wash Buffer A and B module must be purchased.

The Stain Cocktail 1 and 3, Stain Cocktail 2, Array Holding Buffer, and Wash Buffers A and B are ready-to-use solutions. The hybridization cocktail is prepared by combining the Hybridization Mix and nuclease-free water with the target prepared for the specific target labeling assay (IVT or WT).

The Applied Biosystems GeneTitan Hybridization, Wash, and Stain Kit for WT Arrays should always be stored at 2 to 8° C.

Related Links
GeneTitan™ Hybridization, Wash, and Stain Kit for 3' IVT Arrays
GeneTitan™ Wash Buffers A and B Module
GeneChip™ Hybridization Control Kit
B2 Control Oligo (3nM)
GeneChip™ miRNA 4.1 24-Array Plate and Trays
GeneChip™ miRNA 4.1 96-Array Plate and Trays
GeneTitan™ miRNA Array Holding Buffer
GeneChip™ Hybridization Control Kit
GeneChip™ miRNA 3.1 24-Array Plate and Trays
GeneChip™ miRNA 3.1 96-Array Plate and Trays
FlashTag™ Biotin HSR RNA Labeling Kits
FlashTag™ Biotin HSR RNA Labeling Kits
GeneTitan™ Hybridization Module for miRNA Plates
For Research Use Only. Not for use in diagnostic procedures.
사양
용도(애플리케이션)Transcriptome Profiling
수량96 Reactions
시약 유형Hybridization, Wash, Stain
유형Hybridization, Wash, Stain Kit
형식24-array Plate, 96-array Plate
Unit SizeEach

자주 묻는 질문(FAQ)

Is the hybridization mix for cartridges the same as the hybridization mix for PEG arrays (array plates)?

The hybridization mix for PEG arrays is different from the hybridization mix for cartridges. The concentrations of the hybridization mix are different and in addition, DMSO is not added into the hybridization mix for PEG arrays because it can affect the glue that holds the PEG to the plate.