manufacturing Archives

What You Need to Know About PMI of Pipeline Welds and Demister P...

I spend a great of time in the field with customers. That �... by Brian Wilson / 06.04.2019

Free Production Improvement Resources for Steel Manufacturers

Are you producing the best quality steel? Are you producin... by Chien-Chin Chuang / 05.28.2019

3D Printing with Metal Alloy Powder May Make Ultra-strong Metal ...

Most common metals, including iron, steel, tin, nickel, co... by Chris Calam / 05.14.2019

AISTech Iron and Steel Show: From Lubricants to Laser Profiling

The Association for Iron & Steel Technology (AIST) bel... by Roger Maddalena / 04.30.2019

$Metal fasteners, such as screws, nuts, bolts, and clamps, are critical components in manufacturing and construction. Fasteners are made from steel, brass, aluminum, or other metals, depending on the design specifications of the application for which they are being used. Fasteners made with the wrong alloy can result in costly or even catastrophic consequences. Fortunately, inspection and verification of metal alloys used in fasteners can be quickly and easily accomplished using handheld x-ray fluorescence (XRF) analyzers. XRF is a nondestructive testing technique that can analyze a metal sample in seconds with little to no need for sample preparation. A recent example of possibly defective metal fasteners was uncovered during the construction of the Mario M. Cuomo Bridge, a new 3.1 mile twin-span bridge which replaces the Tappan Zee Bridge across the Hudson River in New York. The New York Times reports that the New York attorney general’s office is investigating why a small number of steel bolts intended for the new bridge unexpectedly fractured during the construction process. As first reported by WNBC-TV, some of the allegations were filed by a former safety inspector and suggested that the bolts failed due to hydrogen embrittlement. However, a study obtained by The Times and conducted by engineering firm, Alta Vista, concluded that there was “compelling evidence” that hydrogen embrittlement “is not a cause of the observed bolt failures.” Instead, it said, the fractured bolts were “likely due to occasional material defect or occasional over-tightening.” According to the Nace.org web site, “hydrogen embrittlement is a type of deterioration which can be linked to corrosion and corrosion-control processes. It involves the ingress of hydrogen into a component, an event that can seriously reduce the ductility and load-bearing capacity, cause cracking and catastrophic brittle failures at stresses below the yield stress of susceptible materials. Hydrogen embrittlement occurs in a number of forms but the common features are an applied tensile stress and hydrogen dissolved in the metal. Examples of hydrogen embrittlement are cracking of weldments or hardened steels when exposed to conditions which inject hydrogen into the component. Presently this phenomenon is not completely understood and hydrogen embrittlement detection, in particular, seems to be one of the most difficult aspects of the problem. Hydrogen embrittlement does not affect all metallic materials equally. The most vulnerable are high-strength steels, titanium alloys and aluminum alloys.” To help prevent critical components from failing due to material defect, handheld XRF analyzers are indispensable tools for performing Positive Material Identification (PMI) of incoming raw material to ensure it matches the alloy grade and composition documented on the material test report prior to product manufacture. It is also used for final quality inspection before finished parts are sent to the customer. This “double-check” process helps ensure that the incoming raw materials and the outgoing finished parts meet the expected engineering requirements. To learn more, read Quality Assurance of Critical Fasteners.$

XRF for Alloy Verification Improves Safety of Metal Fasteners

Metal fasteners, such as screws, nuts, bolts, and clamps, ar... by Brian Wilson / 03.12.2019

New High Temperature Alloy for Aerospace Applications

Nickel is a popular alloying metal used to make austenitic (... Mark Lessard by / 02.05.2019

Company
This field is for validation purposes and should be left unchanged.
First Name
Last Name
Email*
Company
Select your country/region*
Pick a category*
*
- I agree for the Thermo Fisher Scientific group (thermofisher.com/legalentities) to contact me by email and/or telephone to inform me of events, products, services and/or promotions offered in connection with the brands Thermo Scientific™, Applied Biosystems™, Invitrogen™, Gibco™, Ion Torrent ™, Unity Lab Services™, Fisher Scientifc™. I can withdraw my consent and unsubscribe at any time by emailing reply@thermofisher.com By submitting my data, I give consent to the collection, processing and use of my personal data in accordance with the Thermo Fisher Scientific Policy (thermofisher.com/privacypolicy).

Get news and research reviews on the topic of your choice, right in your inbox.

Subscribe Now

URL
This field is for validation purposes and should be left unchanged.
First Name
Last Name
Email*
Company
Select your country/region*
Pick a category*
*
- I agree for the Thermo Fisher Scientific group (thermofisher.com/legalentities) to contact me by email and/or telephone to inform me of events, products, services and/or promotions offered in connection with the brands Thermo Scientific™, Applied Biosystems™, Invitrogen™, Gibco™, Ion Torrent ™, Unity Lab Services™, Fisher Scientifc™. I can withdraw my consent and unsubscribe at any time by emailing reply@thermofisher.com By submitting my data, I give consent to the collection, processing and use of my personal data in accordance with the Thermo Fisher Scientific Policy (thermofisher.com/privacypolicy).

Analyzing Metals

Get news and research reviews on the topic of your choice, right in your inbox.