DynaMag™-96 Side Magnet
DynaMag™-96 Side Magnet
Invitrogen™

DynaMag™-96 Side Magnet

DynaMag™-96サイドマグネットは、すべてのタイプのDynabeads™(直径1–4.5 µmの範囲)をPCRチューブの側面または96ウェルプレートのウェルの側面に引き出すように最適化されています。自動化プラットフォーム(Tecanなど)と手動ワークフローの両方に対応するように設計されたこのマグネットは、PCRチューブには対応していませんが、PCRストリップおよび96ウェルプレート詳細を見る
製品番号(カタログ番号)数量
12331D各1
製品番号(カタログ番号) 12331D
価格(JPY)
-
見積もりを依頼する
数量:
各1
DynaMag™-96サイドマグネットは、すべてのタイプのDynabeads™(直径1–4.5 µmの範囲)をPCRチューブの側面または96ウェルプレートのウェルの側面に引き出すように最適化されています。自動化プラットフォーム(Tecanなど)と手動ワークフローの両方に対応するように設計されたこのマグネットは、PCRチューブには対応していませんが、PCRストリップおよび96ウェルプレート(200 µL)、ノンスカートおよびハーフスカートに対応しています。

サンプルを手で操作することなく効率的に混合
このマグネットには追加のカラム(合計13)があります。これにより、96ウェルプレートを右端の位置から左端の位置に移動させたり戻したりするだけでサンプルの混合が可能になります。移動させるとサンプルでビーズが前後に引き寄せられ、手を使わずに混合が可能になり、処理速度が向上し、手作業に起因するサンプルのばらつきが少なくなります。

処理容量
自動化プラットフォームでDynaMag™-96下部マグネットと組み合わせて使用すると、2つのマグネットによりワークフローで大幅な容量変更が可能になります。
• 大量洗浄:DynaMag™-96サイドマグネット
• 低溶出量:DynaMag™-96下部マグネット

Dynabeads™製品の詳細
幅広いアプリケーションに対応するDynabeads™製品をご覧ください。
• Dynabeads™分離用の他のマグネットをご確認ください。
研究用にのみ使用できます。診断用には使用いただけません。
仕様
概要マグネット
使用対象 (装置)DynaMag™
数量各1
出荷条件室温
製品ラインDynaMag
Unit SizeEach
組成および保存条件
マグネット1個入りです。室温保存。

よくあるご質問(FAQ)

What are the Gauss levels for the DynaMag-2 and DynaMag-Spin Magnets?

The DynaMag-2 Magnet is 3,500-3,700 minimum Gauss level and the DynaMag-Spin is 3,000-3,500 minimum Gauss level.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

What is the standard conversion of Gauss to Tesla units?

1 Tesla is equivalent to 10,000 Gauss. .

How can I clean my DynaMag magnet?

Spray and/or wipe the DynaMag magnet unit with one of the following cleaning agents:

- 70% (v/v) isopropyl alcohol
- 1% (v/v) sodium hypochlorite solution (bleach)
- 0.1 N HCl solution

Do not submerge the magnet unit in aqueous solutions and avoid prolonged exposure to water or aqueous solutions. Clean with a damp cloth and mild detergent when exposed to harsh solvents. Do not autoclave the magnet unit as heating the magnet to above 70 degrees C can destabilize the magnetic material, resulting in loss of magnetic strength.

What is the difference between the DynaMag-2 Magnet (Cat. No. 12321D) and DynaMag-Spin Magnet (Cat. No. 12320D)?

The DynaMag-2 Magnet can hold 16 standard 1.5 mL or 2 mL microcentrifuge tubes, while the DynaMag-Spin Magnet holds up to 6 standard 1.5 mL microcentrifuge tubes.

How can I clean my DynaMag magnet?

Spray and/or wipe the DynaMag magnet unit with one of the following cleaning agents:

- 70% (v/v) isopropyl alcohol
- 1% (v/v) sodium hypochlorite solution (bleach)
- 0.1 N HCl solution

Do not submerge the magnet unit in aqueous solutions and avoid prolonged exposure to water or aqueous solutions. Clean with a damp cloth and mild detergent when exposed to harsh solvents. Do not autoclave the magnet unit as heating the magnet to above 70 degrees C can destabilize the magnetic material, resulting in loss of magnetic strength.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.