Product Image
Invitrogen™

Taq DNA Polymerase, native, w/W1

Taq DNAポリメラーゼは熱安定性の高い酵素で、dNTPおよびプライマーの存在下で一本鎖テンプレートからDNAを合成します。含まれる界面活性剤W-1の1%溶液は、最終濃度0.05%(v/v)で添加すると酵素の熱安定性を向上させる可能性があります。Taq DNAポリメラーゼは、分子量94詳細を見る
製品番号(カタログ番号)数量
18038026500ユニット
製品番号(カタログ番号) 18038026
価格(JPY)
74,600
Each
数量:
500ユニット
一括またはカスタム形式をリクエストする
Taq DNAポリメラーゼは熱安定性の高い酵素で、dNTPおよびプライマーの存在下で一本鎖テンプレートからDNAを合成します。含まれる界面活性剤W-1の1%溶液は、最終濃度0.05%(v/v)で添加すると酵素の熱安定性を向上させる可能性があります。

Taq DNAポリメラーゼは、分子量94 kDaの単一ポリペプチドで構成されています。5´→3´ DNAポリメラーゼ活性と5´→3´エキソヌクレアーゼ活性を有しています(図を参照してください)。Taq DNAポリメラーゼを使用すると、以下のことが可能になります。

  • 組換え酵素または天然酵素をお選びいただけます
  • 最大5 kbのサイズのPCR産物の増幅
  • PCR用に認可され、認定されている酵素

    アプリケーション
    複雑なゲノム、ウィルス、およびプラスミドテンプレートからのDNAの増幅、RT-PCR、ssDNAのシーケンシング、および、サイクルシーケンシング

    ソース
    天然酵素は、サーマスアクアチクスYT1から精製します。単位の定義
    1単位のTaq DNAポリメラーゼは、10 nmolのデオキシリボヌクレオチドを74℃で30分以内にDNAに取り込むのに必要な酵素量です。
  • 研究用途にのみご使用ください。診断目的には使用できません。
    仕様
    エキソヌクレアーゼ活性5インチ~3インチ
    フィデリティ(vs. Taq)1倍
    ホットスタート不可
    オーバーハング3in-A
    ポリメラーゼTaq DNAポリメラーゼ
    数量500ユニット
    反応形態別のコンポーネント
    出荷条件氷水またはドライアイスでの出荷が承認されています
    サイズ(最終製品)5 kb以下
    使用対象(アプリケーション)Standard PCR
    GC-Rich PCR Performance
    反応速度スタンダード
    Unit SizeEach
    組成および保存条件
    内容:
    Taq DNAポリミラーゼ(100 µL)
    マグネシウムを含まない10X PCRバッファー(2.5 mL)
    50 mMの塩化マグネシウム(1 mL)
    1%のW-1(1 mL)

    霜取り不要でないフリーザーで−20℃で保存してください。

    よくあるご質問(FAQ)

    My oligonucleotide does not appear to be the right length when I checked by gel electrophoresis. Why is this?

    Oligos should be run on a polyacrylamide gel containing 7 M urea and loaded with a 50% formamide solution to avoid compressions and secondary structures. Oligos of the same length and different compositions can electrophorese differently. dC's migrate fastest, followed by dA's, dT's, and then dG's. Oligos containing N's tend to run as a blurry band and generally have a problem with secondary structure.

    The primers I am using worked for PCR initially, but over time, have stopped working. What happened?

    Primers should be aliquoted for single use before PCR set-up. Heat just the aliquoted primers to 94 degrees for 1 min. Quick chill the primer on ice before adding to the PCR reaction. Some primers may anneal to themselves or curl up on themselves.

    I don't see a pellet in my oligo tube order. Should I ask for a replacement?

    The drying method dries the primer in a thin layer along the sidewalls of the tube instead of the bottom, therefore a pellet is not always visible and should still be ready to use.

    There is a ball-shaped pellet at the bottom of my oligo tube. What is this and can I still use my oligo?

    If the oligo was overheated, it will appear as a “ball”-shaped pellet attached to the bottom of the tube. This should not affect the quality of the oligo, and the oligo should be readily soluble in water.

    There is a green color in my lyophilized oligo. Can I still use it?

    If an oligo appears green in color, this is most likely due to ink falling into the tube. The oligo should still be fully functional. The color can be removed by doing an ethanol precipitation.