Nalgene™ Wide-Mouth Straight-Sided PPCO Jars with Closure
Nalgene™ Wide-Mouth Straight-Sided PPCO Jars with Closure
Thermo Scientific™

Nalgene™ Wide-Mouth Straight-Sided PPCO Jars with Closure

Thermo Scientific™ Nalgene™ PPCO 広口円筒容器は、ペーストや個体状のサンプルおよびラボ小物の保存に適しています。
製品番号(カタログ番号)容量(メートル法)クロージャーサイズ
2118-0032PK
または、製品番号2118-0032
1000 mL120 mm
2118-9050PK
または、製品番号2118-9050
15 mL38 mm
2118-0001PK
または、製品番号2118-0001
30 mL43 mm
2118-0002PK
または、製品番号2118-0002
60 mL53 mm
2118-0004PK
または、製品番号2118-0004
125 mL70 mm
2118-0008PK
または、製品番号2118-0008
250 mL70 mm
2118-0016PK
または、製品番号2118-0016
500 mL120 mm
製品番号(カタログ番号) 2118-0032PK
または、製品番号2118-0032
価格(JPY)
9,180
Online offer
Ends: 27-Mar-2026
11,480
割引額 2,300 (20%)
Pack of 6
お問い合わせください ›
容量(メートル法):
1000 mL
クロージャーサイズ:
120 mm
Thermo Scientific™ Nalgene™ PPCO 広口円筒容器は、ペーストや個体状のサンプルおよびラボ小物の保存に適しています。化学薬品耐性に優れ、オートクレーブ可能
機能:
  • 広口円筒形状により、サンプルの取り扱いが容易
  • 15、30、および 60 mL の容器には、ナチュラル色ポリプロピレン製スクリューキャップが付いています。
  • 125 mL ~ 1 L の容器には、上部がくぼんだ白いポリプロピレン製キャップが付いており、積み重ねできます。冷蔵庫やカウンタートップを整理し、保管スペースを最大限に有効利用するのに役立ちます。
  •  
  • キャップを取り外して個別にオートクレーブをしてください。
  • 液漏れ防止構造ではありません。輸送を伴う液体の保管には推奨しません。
仕様
容量32 oz., 1000 mL
透明度Translucent
クロージャーサイズ120 mm
キャップタイプCap
直径(ヤードポンド法)4.4 in.
直径(メートル法)112 mm
高さ(ヤードポンド法)6.0 in.
高さ(メートル法)151 mm
内容Polypropylene Caps
口内径(メートル法)112 mm
箱あたりの入数24
パックあたり入数6
重量(メートル法)0.18 kg
容量(ヤードポンド法)32 oz.
容量(メートル法)1000 mL
Translucent
材料PPCO
広口
製品タイプStraight-sided Jar
形状Round
Unit SizePack of 6

よくあるご質問(FAQ)

Are the Nalgene PPCO media bottles/tubes able to be irradiated?

PPCO bottles/tubes are not recommended for sterilization by radiation. Polycarbonate bottles/tubes would be a suitable alternative if radiation sterilization is desired.

Why are some of your wide mouth bottles and jars not considered liquid leakproof?

This was a consequence of design and engineering limitations, and there was no practical way to incorporate the same level of seal integrity as our certified leakproof containers. While in many cases, they still hold up well to liquid containment applications, they have not been tested specifically for that purpose, and thus would be the responsibility of the customer to perform validation and risk management studies if necessary.