KingFisher™ Flex 96 Deep Well head

KingFisher™ Flex磁性粒子粒子精製用のマグネティックヘッドです（カタログ番号5400630および5400640）。このマグネティックヘッドは、96ディープウェルフォーマットシステムの交換用ヘッド、または24ディープウェルフォーマットシステムの補充用ヘッドとして機能します。詳細を見る

製品番号（カタログ番号）	数量
24074430	1台

製品番号（カタログ番号） 24074430

価格（JPY）

510,000

お問い合わせください ›

KingFisher™ Flex磁性粒子粒子精製用のマグネティックヘッドです（カタログ番号5400630および5400640）。このマグネティックヘッドは、96ディープウェルフォーマットシステムの交換用ヘッド、または24ディープウェルフォーマットシステムの補充用ヘッドとして機能します。

研究用途にのみご使用ください。診断目的には使用できません。

製品ラインKingFisher

出荷条件室温

Unit SizeEach

よくあるご質問（FAQ）

Do you offer an alternative for the discontinued MagMAX Express-96 Deep Well Magnetic Head (Cat. No. 4388435)?

Unfortunately, we do not offer an alternative for the discontinued MagMAX Express-96 Deep Well Magnetic Head (Cat. No. 4388435).

I see that the KingFisher 24 Deep Well Head has a processing volume of 5 mL. Does that mean that I can process up to 5 mL of my sample?

No, the processing volume refers to the maximum volume that can be held in the 24 Deep Well plates. This incorporates the volume of binding buffers and beads, so when scaling up reaction volumes, it is important to make sure that the total volume does not exceed 5 mL.

My KingFisher Flex run was stopped due to an error message. Can I start the protocol from where it stopped?

No, once a protocol was stopped, it will restart from the beginning. The extraction procedure can either be finished manually by using a magnetic stand, or a modified version of the original KingFisher Flex script would have to be created that starts off at the point where the run was stopped.

I have a 12-plate protocol but there are only 8 slots on the KingFisher Flex instrument turntable. What should I do with the remaining 4 plates?

Set up the protocol on the BindIt software. After the first 8 plates are done, the instrument will pause and instruct you to switch out the plates.

Is it always necessary to use the transport locks on the KingFisher Flex instrument?

The transport locks are only necessary when relocating the instrument.

View all KingFisher™ Flex 96 Deep Well head FAQs