KingFisher™ Flex 24 Deep Well head
KingFisher™ Flex 24 Deep Well head
Thermo Scientific™

KingFisher™ Flex 24 Deep Well head

KingFisher™ Flex磁性粒子精製システム用のマグネティックヘッドです(カタログ番号5400630および5400640)。このマグネティックヘッドは、24ディープウェルフォーマットシステムの交換用ヘッド、または96ディープウェルフォーマットシステムの補充用ヘッドとして機能します詳細を見る
製品番号(カタログ番号)数量
240744401台
製品番号(カタログ番号) 24074440
価格(JPY)
510,000
Each
お問い合わせください ›
数量:
1台
KingFisher™ Flex磁性粒子精製システム用のマグネティックヘッドです(カタログ番号5400630および5400640)。このマグネティックヘッドは、24ディープウェルフォーマットシステムの交換用ヘッド、または96ディープウェルフォーマットシステムの補充用ヘッドとして機能します。
研究用途にのみご使用ください。診断目的には使用できません。
仕様
使用対象 (装置)KingFisher™ Flex
製品ラインKingFisher
数量1台
出荷条件室温
容量24個のサンプル
フォーマット24ディープウェルヘッド
Unit SizeEach

よくあるご質問(FAQ)

I see that the KingFisher 24 Deep Well Head has a processing volume of 5 mL. Does that mean that I can process up to 5 mL of my sample?

No, the processing volume refers to the maximum volume that can be held in the 24 Deep Well plates. This incorporates the volume of binding buffers and beads, so when scaling up reaction volumes, it is important to make sure that the total volume does not exceed 5 mL.

My KingFisher Flex run was stopped due to an error message. Can I start the protocol from where it stopped?

No, once a protocol was stopped, it will restart from the beginning. The extraction procedure can either be finished manually by using a magnetic stand, or a modified version of the original KingFisher Flex script would have to be created that starts off at the point where the run was stopped.

I have a 12-plate protocol but there are only 8 slots on the KingFisher Flex instrument turntable. What should I do with the remaining 4 plates?

Set up the protocol on the BindIt software. After the first 8 plates are done, the instrument will pause and instruct you to switch out the plates.

Is it always necessary to use the transport locks on the KingFisher Flex instrument?

The transport locks are only necessary when relocating the instrument.

Are the volumes of reagents in each well critical for a successful KingFisher Flex run?

We strongly recommend that you maintain the specified volumes within the defined limits to avoid spillover and to help ensure the best performance at the most efficient level.