DynaMag™-PCR Magnet
Invitrogen™

DynaMag™-PCR Magnet

DynaMag™-PCRマグネット
製品番号(カタログ番号)数量
4920251 each
製品番号(カタログ番号) 492025
価格(JPY)
73,100
Each
数量:
1 each

The MAGnify™ ChIP system utilizes a novel magnet that is compatible with 0.2mL PCR strip tubes. This magnet is critical for enabling the use of reduced starting cell numbers and volumes for immunoprecipitation and washing steps. This novel magnetic separator allows you to achieve results quickly and easily while offering the freedom to simultaneously perform multiple ChIP assays in PCR tubes with a multi-channel pipettor.

MAGnify™ ChIPシステムでは、0.2 mL PCRストリップチューブに対応する新しいマグネットが使用されています。このマグネットは、免疫沈降および洗浄ステップで使用する開始細胞数と容量を少なくするために重要です。この新しい磁気分離器により、マルチチャネルピペットを使用してPCRチューブで同時に複数のChIPアッセイを自由に実行しながら、迅速かつ簡単に結果を得ることができます。
研究用にのみ使用できます。診断用には使用いただけません。
仕様
使用対象 (装置)DynaMag™
製品ラインDynaMag
数量1 each
出荷条件室温
Unit SizeEach
組成および保存条件
マグネットは室温で保管してください。

よくあるご質問(FAQ)

What are the Gauss levels for the DynaMag-2 and DynaMag-Spin Magnets?

The DynaMag-2 Magnet is 3,500-3,700 minimum Gauss level and the DynaMag-Spin is 3,000-3,500 minimum Gauss level.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

What is the standard conversion of Gauss to Tesla units?

1 Tesla is equivalent to 10,000 Gauss. .

How can I clean my DynaMag magnet?

Spray and/or wipe the DynaMag magnet unit with one of the following cleaning agents:

- 70% (v/v) isopropyl alcohol
- 1% (v/v) sodium hypochlorite solution (bleach)
- 0.1 N HCl solution

Do not submerge the magnet unit in aqueous solutions and avoid prolonged exposure to water or aqueous solutions. Clean with a damp cloth and mild detergent when exposed to harsh solvents. Do not autoclave the magnet unit as heating the magnet to above 70 degrees C can destabilize the magnetic material, resulting in loss of magnetic strength.

What is the difference between the DynaMag-2 Magnet (Cat. No. 12321D) and DynaMag-Spin Magnet (Cat. No. 12320D)?

The DynaMag-2 Magnet can hold 16 standard 1.5 mL or 2 mL microcentrifuge tubes, while the DynaMag-Spin Magnet holds up to 6 standard 1.5 mL microcentrifuge tubes.

How can I clean my DynaMag magnet?

Spray and/or wipe the DynaMag magnet unit with one of the following cleaning agents:

- 70% (v/v) isopropyl alcohol
- 1% (v/v) sodium hypochlorite solution (bleach)
- 0.1 N HCl solution

Do not submerge the magnet unit in aqueous solutions and avoid prolonged exposure to water or aqueous solutions. Clean with a damp cloth and mild detergent when exposed to harsh solvents. Do not autoclave the magnet unit as heating the magnet to above 70 degrees C can destabilize the magnetic material, resulting in loss of magnetic strength.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.