CloneMiner™ II cDNA Library Construction Kit
CloneMiner™ II cDNA Library Construction Kit
Invitrogen™

CloneMiner™ II cDNA Library Construction Kit

CloneMiner™ II cDNAライブラリ構築キットは、制限酵素クローニングを行わずに、代表的なcDNAライブラリを迅速に構築できる第ニ世代のCloneMiner™キットです。この革新的なライブラリ構築技術は、SuperScript™ III逆転写酵素とGateway™クローニング技術を兼ね備えているため、これまで得られなかった完全長クローンを見出せます。また詳細を見る
製品番号(カタログ番号)数量
A111801キット
製品番号(カタログ番号) A11180
価格(JPY)
533,100
Each
お問い合わせください ›
数量:
1キット
CloneMiner™ II cDNAライブラリ構築キットは、制限酵素クローニングを行わずに、代表的なcDNAライブラリを迅速に構築できる第ニ世代のCloneMiner™キットです。この革新的なライブラリ構築技術は、SuperScript™ III逆転写酵素とGateway™クローニング技術を兼ね備えているため、これまで得られなかった完全長クローンを見出せます。また、時間のかかる非効率的なライゲーション反応も使用しないため、迅速にライブラリを構築でき、より代表的なライブラリにします。

CloneMiner™ II cDNAライブラリ構築キットを使用すると以下を実現できます。
•最初の力価が高くなります
• 平均インサートサイズが大きくなります
• 完全長遺伝子の割合が非常に高くなります
• 制限酵素消化やライゲーションを必要とせずに、cDNAを複数の目的ベクターに高効率でクローニングできます

CloneMiner™ IIキットの仕組み:

• 高収量の完全長cDNA:CloneMiner™ IIキットには、cDNA収量を高めるためのSuperScript™ IIIが含まれています。SuperScript™ II RTの特許取得済み変異体であるSuperScript III™逆転写酵素(RT)は、50℃で活性があり、220分の半減期です。RNase H活性を抑制する点変異があるため、第一鎖合成中のRNAの分解が減少し、完全長遺伝子の割合が上昇します。

•Gateway™クローニング技術で、制限酵素クローニングを回避できます。Gateway™技術を介してライブラリ構築を行います。Gateway技術は、クローニングに制限酵素やリガーゼを使用しない、部位特異的な組み換えシステムです。各cDNAインサートを、Gateway™ドナーベクターに存在する相補的なatt部位と組み換えしてエントリークローンを作製する特異的なatt組み換え部位(cDNA合成ステップ中に付加)に配置します。その後、エントリークローンをGateway™発現ベクターと組み換えて発現クローンを作製するため、制限酵素やリガーゼの使用と事実上置き換えることができます。得られたクローンは、元の向きとリーディングフレームを維持するため、完全長遺伝子とライブラリ全体の機能解析が可能です。

このキットは、オリジナルのCloneMiner™キットとどこが違いますか?
•新しいキットでは、簡略化したプロトコルを取り入れています。
•高いcDNA収量を確保するため、SuperScript™ II逆転写酵素(RT)をSuperScript™ III逆転写酵素に置き換えました。
• 少ないピペット操作で反応の準備ができるように、Gateway™ BP Clonase™酵素ミックスを、Gateway™ BP Clonase™ II酵素ミックスに置き換えました。このミックス1本に、酵素とバッファーが含まれています。
研究用にのみ使用できます。診断用には使用いただけません。
仕様
菌株または酵母株DH10B
クローニング法Gateway
最終産物タイプcDNAライブラリ
使用対象(アプリケーション)cDNAライブラリおよびライブラリの構築
製品ラインCloneMiner
製品タイプLibrary Preparation Kit
数量1キット
逆転写酵素SuperScript™ III
ベクターpDONR222
フォーマットキット
Unit SizeEach
組成および保存条件
CloneMiner™ II Kit には、SuperScript™ III RT、Gateway™ベクター、cDNAライブラリ構築用試薬、およびElectroMax™ DH10B™ T1-ファージ耐性コンピテントセルが含まれます。詳細については、マニュアルを参照してください。ElectroMax™ DH10B™ T1ファージ耐性コンピテントセルは–80℃で、cDNAサイズ分画カラムは+4℃で、その他すべてのキット構成品は–20℃で保存します。

よくあるご質問(FAQ)

Do you still offer the SuperScript Full length cDNA Library Construction Kit?

The SuperScript Full length cDNA Library Construction Kit has been discontinued. The alternative is the CloneMiner II cDNA Library Construction Kit, Cat. No. A11180.

What are the benefits of using the Gateway system in your CloneMiner II cDNA Library Construction Kit?

Gateway entry clone cDNA libraries are ready to transfer into suitable destination vectors for gene expression. You do not have to worry about restriction enzyme digestion of cDNA (which can decrease the insert size,) or vector prior to cloning.

What kit would you recommend for making cDNA libraries?

We would recommend using the CloneMiner cDNA Library Construction Kit (Cat. No. A11180) for construction of high-quality Gateway cloning-compatible cDNA libraries without the use of restriction enzyme cloning. This system uses highly efficient recombinational cloning, resulting in a higher number of primary clones compared to standard cDNA library construction methods.

How large of a PCR product can I recombine with a pDONR vector via BP cloning? Does the same apply for TOPO-adapted Entry vectors?

There is no theoretical limit to insert size for a BP reaction with a pDONR vector. Maximum size tested in-house is 12 kb. TOPO vectors are more sensitive to insert size and 3-5 kb is the upper limit for decent cloning efficiency.

How should I clean up my attB-PCR product?

After generating your attB-PCR product, we recommend purifying it to remove PCR buffer, unincorporated dNTPs, attB primers, and any attB primer-dimers. Primers and primer-dimers can recombine efficiently with the Donor vector in the BP reaction and may increase background after transformation into E. coli, whereas leftover PCR buffer may inhibit the BP reaction. Standard PCR product purification protocols using phenol/chloroform extraction followed by ammonium acetate and ethanol or isopropanol precipitation are not recommended for purification of the attB-PCR product as these protocols generally have exclusion limits of less than 100 bp and do not efficiently remove large primer-dimer products. We recommend a PEG purification protocol (see page 17 of the Gateway Technology with Clonase II manual). If you use the above protocol and your attB-PCR product is still not suitably purified, you may further gel-purify the product. We recommend using the PureLink Quick Gel Extraction kit.