PolarScreen™ Vitamin D Receptor Competitor Assay Kit, Red
PolarScreen™ Vitamin D Receptor Competitor Assay Kit, Red
Thermo Scientific™

PolarScreen™ Vitamin D Receptor Competitor Assay Kit, Red

PolarScreen™ビタミンD受容体競合アッセイキット、レッドを使用すれば、高感度かつ効率的な方法で、ビタミンD受容体(VDR)リガンドの高スループットの蛍光偏光ベースのスクリーニングが可能になります。このキットでは、昆虫細胞で発現する、ヒト完全長VDR(個別にも使用可能詳細を見る
製品番号(カタログ番号)数量
A15907800 x 20 μL assays
製品番号(カタログ番号) A15907
価格(JPY)
162,000
Online offer
Ends: 27-Mar-2026
270,100
割引額 108,100 (40%)
Each
お問い合わせください ›
数量:
800 x 20 μL assays
PolarScreen™ビタミンD受容体競合アッセイキット、レッドを使用すれば、高感度かつ効率的な方法で、ビタミンD受容体(VDR)リガンドの高スループットの蛍光偏光ベースのスクリーニングが可能になります。このキットでは、昆虫細胞で発現する、ヒト完全長VDR(個別にも使用可能)と、新しく親和性の高い、蛍光VDRリガンド(Fluormone™ VDR Red)を、均質な調合済みアッセイフォーマットで使用します。

このキットは、赤色の読み取りを生成し、競合化合物のIC50を決定するのに適しています。詳細について知りたい場合、またはサポートが必要な場合は、drugdiscoverytech@lifetech.comまでお問い合わせください。

PolarScreenビタミンD受容体コンペティターアッセイは、次のような特長を持ちます。

•すぐに使用できるよう完全に調合済み — すべての試薬が含まれているので、試験化合物を追加するだけで使用できます
•高スループットに対応—384ウェルプレートでの蛍光偏光アッセイ
• 使いやすい—大規模なスクリーニングニーズに合わせて、内容物をバルクサイズで提供しています。

アッセイの使用方法
蛍光VDRリガンド(Fluormone VDRレッド)にVDRを追加して受容体/トレーサー複合体を形成し、高い偏光値を実現します。その後、この複合体はマイクロウェルプレートの個々の試験化合物に追加されます。コンペティターは複合体からトレーサーを置換し、その結果、蛍光リガンドがその蛍光寿命内により高速に回転するため、偏光値が低くなります。非コンペティターは複合体から蛍光リガンドを置換しないため、偏光値は高いままです。試験化合物の存在下での偏光値の変化を使用して、VDRの試験化合物の相対的親和性を決定します(図を参照)。

バルク容量について、あるいはアッセイ開発やライブラリスクリーニングなど、核受容体アッセイのその他のニーズに関してサポートが必要な場合は、お問い合わせください。
研究用途にのみご使用ください。診断目的には使用できません。
仕様
使用対象(アプリケーション)競合結合アッセイ、核内受容体アッセイ
リガンドVDR
No. of Assays800 x 20 μL Assays
製品タイプVitamin D Receptor Competitor Assay Kit
数量800 x 20 μL assays
製品ラインPolarScreen
Unit SizeEach
組成および保存条件
VDR組換えヒトタンパク質、チューブ1本(-68から-85℃で保管)
Fluormone VDRレッドトレーサー、チューブ1本(-5から-30℃で保管)
VDRレッドスクリーニングバッファー、ボトル3本(-5から-30℃で保管)
DTT、チューブ1本(-5から-30℃で保管)

よくあるご質問(FAQ)

What are the common issues encountered with FP assays?

-No assay window: Check that your instrument is designed to do FP experiments.
-Poor discrimination between the minimum and maximum mP Control (both include the receptor): This may be an indication of the quality of the receptor. Do not make single use aliquots of the receptor or store diluted.
-The type of microplate is critical: Please see if the protocol specifies untreated polystyrene or NBS-coated plates. If the plate binds the fluorescent substrate, it cannot freely rotate and the mP reading will always be high. White plates cannot be used for FP assays. Avoid the use of silanized pipette tips and vials.
-The “No Receptor Control' (free Fluormone/Tracer) should have much higher RFU values compared to buffer alone. If not, there is a problem with the instrument setup or less commonly with the Fluormone/Tracer.
-If the free Fluormone/Tracer mP value is greater than 100 mP or negative, please refer to the user manual for your instrument and reset the G factor.

Find additional tips, troubleshooting help, and resources within our Drug Discovery & Development Support Center.

What is the best type of microplate reader for fluorescence polarization (FP) assays?

For FP assays, plate readers must specifically have FP built in. Please see our instrument compatibility portal (http://www.thermofisher.com/us/en/home/industrial/pharma-biopharma/drug-discovery-development/dd-misc/instrument-compatibility-portal.html).

Find additional tips, troubleshooting help, and resources within our Drug Discovery & Development Support Center.

How can I test the fluorescence polarization (FP) settings of my microplate reader before doing the assay?

We offer a FP One-Step Reference Kit (https://www.thermofisher.com/order/catalog/product/P3088) to detect in green (Ex/Em = 488/535 nm) and red (Ex/Em = 525/590 nm) emission ranges, suitable for the PolarScreen Green and Red Assays. The alternative is to perform the Controls in the respective assay kit prior to performing the actual assay using test compounds.

Find additional tips, troubleshooting help, and resources within our Drug Discovery & Development Support Center.