CF1 Mouse Embryonic Fibroblasts, irradiated
CF1 Mouse Embryonic Fibroblasts, irradiated
CF1 Mouse Embryonic Fibroblasts, irradiated
CF1 Mouse Embryonic Fibroblasts, irradiated
Gibco™

CF1 Mouse Embryonic Fibroblasts, irradiated

照射されたGibco CF1マウス胚性線維芽細胞(MEF)は、培養中のヒトおよびマウスの健全な未分化胚性幹細胞(ESC)および人工多能性幹細胞(iPSC)のサポートに最適なフィーダー細胞です。MTI-GlobalStemにより製造され詳細を見る
製品番号(カタログ番号)数量
A34181400万個の細胞(4 x 106個の細胞)
A34180200万個の細胞(2 x 106 個の細胞
製品番号(カタログ番号) A34181
価格(JPY)
9,100
Each
お問い合わせください ›
数量:
400万個の細胞(4 x 106個の細胞)
照射されたGibco CF1マウス胚性線維芽細胞(MEF)は、培養中のヒトおよびマウスの健全な未分化胚性幹細胞(ESC)および人工多能性幹細胞(iPSC)のサポートに最適なフィーダー細胞です。MTI-GlobalStemにより製造され、MTI-GlobalStem(カタログ番号GSC-6001GおよびGSC-6201G)に相当し、これらの広く使用されているMEF細胞を、増殖したCF1マウスから単離し、照射により有糸分裂的に阻止し、安全性と性能を確保するために試験を行います。CF1 MEFは多能性幹細胞を培養するための従来のフィーダー細胞です。ICRマウス由来のMEFについては、マウス(ICR)不活性化胚性線維芽細胞を参照してください。

•事前に不活性化されたすぐに使用可能なMEFにより、貴重な時間を節約できます
• 細心の注意を払って試験が行われたフィーダー細胞を使用した信頼性の高い培養ESCおよびiPSC
• 広く使用されている製品にお任せください

すぐに使用可能なMEFで時間を節約できます
照射されたCF1 MEFを使用することで、毎日、毎週の動物施設での作業、冗長で時間のかかる解剖、細胞の増殖と試験にかかる時間を節約し、トラブルを回避します。これらの事前に不活性化されたすぐに使用可能なフィーダーを使用して、研究に集中できます。

細心の注意を払って試験が行われたフィーダー細胞を使用した培養
CF1 MEFの各ロットは、細菌、真菌、マイコプラズマ、およびマウス病原体について試験され、汚染のリスクを最小限に抑えます。各ロットは、解凍後の生存率(通常95%超)やマウスおよびヒトES細胞をサポートする能力についても試験されており、堅牢で一貫した性能が保証されます。これらのMEFは、他の種のESC/iPSC系統で正常に使用されていますが、このようなアプリケーションに使用する場合は互換性の試験を行う必要があります。

広く使用されている製品にお任せください
これらのCF1 MEFは世界中の多くのラボで使用されており、さまざまな出版物で引用されています。これらは、2 x 104–5.3 x 104細胞/cm2 の範囲の密度で、未分化多能性幹細胞のサポートに正常に使用されています。

研究用途にのみご使用ください。診断目的には使用できません。
仕様
ドナー源プールされた
数量400万個の細胞(4 x 106個の細胞)
出荷条件ドライアイスで出荷
AgeEmbryonic
細胞タイプフィーダーセル、線維芽細胞
形状凍結保存済み
マウス
Unit SizeEach
組成および保存条件
凍結保存マウス胚性線維芽細胞

液体窒素で保管。

よくあるご質問(FAQ)

What quantity will I receive when I order CF1 Mouse Embryonic Fibroblasts, irradiated (Cat. No. A34181)?

CF1 Mouse Embryonic Fibroblasts, irradiated (Cat. No. A34181) provides 4 million cells contained in one vial.

Find additional tips, troubleshooting help, and resources within our Stem Cell Culture Support Center

What is the difference between Mouse (ICR) Inactivated Embryonic Fibroblasts (Cat. No. A24903) and CF1 Mouse Embryonic Fibroblasts, irradiated (Cat. Nos. A34180, A34181)? Can they be used to reprogram fibroblasts?

Mouse (ICR) Inactivated Embryonic Fibroblasts and CF1 Mouse Embryonic Fibroblasts, irradiated are inactivated feeder layer fibroblast cells that are isolated from different mouse strains. Researchers often have a preference for one or the other. Neither of these can be used to reprogram fibroblasts.

Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.

Is it better to use irradiated mouse embryonic fibroblasts (MEFs) or Mitomycin C-treated MEFs to grow embryonic stem cells?

Either method will work in arresting cell division. However, the irradiation process will ensure that cell division will cease regardless of cell aggregation. Cell clumping can potentially not inactivate all cells when using mitomycin C, as cells within clumps may not be exposed to the mitomycin C. Irradiated cells are preferred by those who have concerns about chemical treatment. Mitomycin C-treated cells are preferred by those who have concerns about DNA damage from irradiation.

What are the differences between CF1, CF6, and DR4 mouse embryonic fibroblasts?

CF1 mouse embryonic fibroblasts do not have drug resistance. CF6 mouse embryonic fibroblasts are resistant to Neomycin/geneticin (G418). DR 4 mouse embryonic fibroblasts are resistant to geneticin (G418), puromycin, hygromycin, and 6-thioguanine.

What is the recommended seeding density for mouse embryonic fibroblasts? Why is the seeding density critical?

We recommend seeding these cells at densities ranging from 2 x 10E4 to 5.5 x 10E4 cells/cm2. A good starting point is 3 x 10E4 cells/cm2. If the feeder cells are too sparse, they may not maintain the pluripotent cells without differentiation, and the pluripotent cells may not attach well. If the feeder cells are too dense, the feeder layer may detach from the plate, and the culture will be lost.