E-Gel™ Agarose Gels with SYBR™ Safe DNA Gel Stain
E-Gel™ Agarose Gels with SYBR™ Safe DNA Gel Stain
Invitrogen™

E-Gel™ Agarose Gels with SYBR™ Safe DNA Gel Stain

Green features
SYBR Safe DNAゲル染色剤を使用したInvitrogen E-Gelプレキャストアガロースゲルは、迅速かつ簡単で安全なDNAサンプル電気泳動を実現するように設計されています。各E-Gelアガロースゲルカセットには、効率的なゲル分離と分析に必要なすべての成分と染色剤が含まれています—サンプルをロードして分析するだけです。E-Gelアガロースゲルは、PCR産物、制限酵素消化物詳細を見る
製品番号(カタログ番号)数量分離範囲ゲル濃度
A42135ゲル10枚50 to 2000 bp2%
A42100ゲル10枚100 to 5000 bp1%
A452022xゲル10枚100 to 5000 bp1%
A452035xゲル10枚100 to 5000 bp1%
A452042xゲル10枚50 to 2000 bp2%
A452055xゲル10枚50 to 2000 bp2%
A42136ゲル10枚10 to 500 bp4%
A452062xゲル10枚10 to 500 bp4%
製品番号(カタログ番号) A42135
価格(JPY)
19,600
Each
お問い合わせください ›
数量:
ゲル10枚
分離範囲:
50 to 2000 bp
ゲル濃度:
2%
SYBR Safe DNAゲル染色剤を使用したInvitrogen E-Gelプレキャストアガロースゲルは、迅速かつ簡単で安全なDNAサンプル電気泳動を実現するように設計されています。各E-Gelアガロースゲルカセットには、効率的なゲル分離と分析に必要なすべての成分と染色剤が含まれています—サンプルをロードして分析するだけです。E-Gelアガロースゲルは、PCR産物、制限酵素消化物、プラスミド調製物、またはDNAフラグメントライブラリの分析に最適です。

E-Gelアガロースゲルの特徴:
すぐに設定可能—使いたいときにすぐに使用でき、ゲル調製や追加のバッファーは不要です
より安全な選択—エチジウムブロマイドのより安全な代替品であるSYBR Safe DNA染色剤が含まれています
高性能—わずか30分ほどの分離時間で、3 ngのサンプルDNAを検出できます
工程内管理—リアルタイムでDNAサンプルの移動を確認できます
簡単なサンプルへのアクセス—オープン可能なカセット設計により、ゲル内に簡単にアクセスでき、DNAサンプルの切除や膜への転写が容易に行えます
より優れたサンプルの完全性—UVとは対照的に、青色光励起波長を利用してDNA損傷を最小限に抑えます

より安全なオプション
エチジウムブロマイドやUVなどの有害な変異原性因子への曝露を最小限に抑えるために、SYBR Safe DNA染色ゲルをお選びください。SYBRセーフを用いたプレキャストE-Gelアガロースゲルは、青色光トランスイルミネーションと組み合わせることで、サンプルの完全性が向上し、より安全な作業環境を提供します。

高速で簡便な分析
E-Gelアガロースゲルは、1バンドあたり3 ngのサンプルDNAの検出感度と、従来の自分で注ぐタイプのゲルの2~3倍速い分離時間で、高速かつ高性能な分析を可能にします。各E-Gelアガロースゲルには、アガロース、電極、SYBRセーフDNA染色剤、およびバッファーレスのイオン交換システムが、乾燥したディスポーザブルカセット内にパッケージされています。E-Gel技術では、ゲルやバッファーの調製、またはゲル染色のステップは必要ありません。サンプルをロードして泳動するだけです。

DNAの移動をライブでモニタリング
E-Gelアガロースゲルは、青色光スペクトルの励起波長を持つSYBR Safe DNAゲル染色剤で染色済みです。青色光トランスイルミネーターを内蔵したE-Gelパワースナップ電気泳動装置で使用すると、UVとは対照的に、眼やサンプルにリスクをかけることなく、DNA移行の安全なリアルタイムモニタリングが可能になります。

ゲルへのアクセスが容易
E-Gelカセットは、ゲルナイフで簡単に開けることができるように設計されているため(カタログ番号 EI9010 )、ゲル内に簡単にアクセスして、特定のバンド切除やサザンブロット分析のための膜への転写ができます。

核酸マーカー
E-Gel DNAラダーについて詳しく見る›

泳動およびイメージング機器
E-Gelアガロースゲルには、ゲルの泳動と観察用にE-Gelパワースナップ電気泳動システムが必要です。このシステムは、電気泳動装置とカメラで構成されており、E-Gelアガロースゲルの迅速で簡便な分離と分析を実現します。
E-Gelパワースナップ電気泳動システムについて詳しく見る›

各種フォーマットが利用可能
E-Gelアガロースゲルには、ゲルのパーセンテージ、染色剤、ウェルの各種フォーマットが用意されています。SYBRセーフを用いた11ウェルE-Gelアガロースゲルは、1%、2%、および4%のゲル濃度がご利用いただけます。E-Gelアガロースゲル選択ガイド

研究用途にのみご使用ください。診断目的には使用できません。
仕様
Compatible LaddersE-Gel™ 1 Kb Plus Expressラダー
グリーン機能少ない危険性
製品タイプアガロースゲル
数量ゲル10枚
出荷条件室温
染色タイプSYBR™ Safe
ゲル濃度2%
ゲルタイプE-Gel
分離範囲50 to 2000 bp
ウェル11ウェル
Unit SizeEach
組成および保存条件
各ボックスには10枚のゲルが入っています。必ず室温で保管してください。凍結しないようにし、冷凍庫やその他の非管理環境の近くでは冷点を避けてください。

よくあるご質問(FAQ)

How can I view DNA on my E-Gel agarose gel with SYBR Safe DNA stain?

SYBR Safe-stained gels can be visualized with a standard UV transilluminator, a laser-based scanner equipped with an excitation source in the UV range or between 470 and 530 nm, or a blue-light transilluminator.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

My E-Gel agarose gel has speckles when viewed in the imager. What should I do?

Here are some suggestions:

- Try cleaning the cassettes with alcohol and Kimwipes wipers.
- Try cleaning the camera lens.
- Try to adjust the exposure time and brightness options of the documentation system you are using.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

My sample is leaking from the wells when running my E-Gel agarose gels. What happened?

Please ensure that you have not overloaded the well and that the wells were not damaged during comb removal.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

I accidentally stored my E-Gel agarose gels at 4 degrees C instead of room temperature. Can I still use them?

While we recommend storage at room temperature, these gels will still be usable. Bring the gels to room temperature prior to the run for optimal conditions.

Find additional tips, troubleshooting help, and resources within ourNucleic Acid Gel Electrophoresis and Blotting Support Center.

What loading buffer should I use for my E-Gel agarose gels?

Loading buffer is optional. Samples can be loaded directly into the wells if no buffer is used, or you can dilute them with deionized water or TE buffer. If you want to use a loading buffer, please see the recipes below:

E-Gel agarose gels (including EX)
10 mM Tris-HCl, pH 7.5
1 mM EDTA
0.005% bromophenol blue
0.005% xylene cyanol FF
E-Gel CloneWell II and E-Gel SizeSelect II agarose gels
10 mM Tris-HCl, pH 7.5
1 mM EDTA

Alternatively, you can use 10X BlueJuice Gel Loading Buffer or TrackIt Loading Buffer. Dilute this buffer 50- to 200-fold to obtain optimal results with E-Gel agarose gels.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.