E-Gel™ EX Double Comb Agarose Gels
E-Gel™ EX Double Comb Agarose Gels
Invitrogen™

E-Gel™ EX Double Comb Agarose Gels

Invitrogen E-Gel EXダブルコームプレキャストアガロースゲルは、わずか 5–8分で超高感度で便利なDNAサンプル電気泳動を行えるように設計されています。各E-Gel EXダブルコームゲルカセットには、効率的なゲルの分離と分析に必要なすべての成分と染色剤が含まれています—サンプルをロードして泳動するだけです。E-Gel EXダブルコームゲルは詳細を見る
製品番号(カタログ番号)数量分離範囲ゲル濃度
A448885x10100 to 5000 bp1%
A42345ゲル10枚100 to 5000 bp1%
A448872x10100 to 5000 bp1%
A42346ゲル10枚50 to 2000 bp2%
A448892x1050 to 2000 bp2%
A448905x1050 to 2000 bp2%
製品番号(カタログ番号) A44888
価格(JPY)
127,000
Each
お問い合わせください ›
数量:
5x10
分離範囲:
100 to 5000 bp
ゲル濃度:
1%
Invitrogen E-Gel EXダブルコームプレキャストアガロースゲルは、わずか 5–8分で超高感度で便利なDNAサンプル電気泳動を行えるように設計されています。各E-Gel EXダブルコームゲルカセットには、効率的なゲルの分離と分析に必要なすべての成分と染色剤が含まれています—サンプルをロードして泳動するだけです。E-Gel EXダブルコームゲルは、PCR産物、制限酵素消化物、プラスミド調製物、またはジェノタイピングサンプルの分析に最適です。

E-Gel EXダブルコームアガロースゲルの特長:
すぐに設定可能—プレキャストE-Gelアガロースゲルは使いたいときにすぐに使用可能で、ゲル調製や追加バッファーは不要です
高感度—1 ngのサンプルDNAを検出します
迅速な分析—DNAサンプルの分離が5~8分で完了します
工程間管理—DNAサンプルの移動をリアルタイムで見ることができます
サンプルアクセスが容易—オープン可能なカセット設計により、ゲル内に簡単にアクセスできるため、DNAサンプル切除や膜への転写に便利です
DNA用—DNAサンプル解析に最適

DNAの超高感度検出
E-Gel EXダブルコームゲルは、SYBRゴールドDNA染色剤を含み、究極の感度を実現するために開発され、エチジウムブロマイド含有の同等のゲルよりも最大5倍高い感度を示しています。この優れた感度により、サンプル量を抑えられ、時間と費用が節約できます。

高速で簡便
E-Gel EXダブルコームゲルは、アガロースゲルの中でもっとも高速な分離を実現し、わずか5~8分でサンプル分析を行えます。各E-Gel EXダブルコームゲルには、アガロース、電極、SYBR Gold DNA染色剤、およびバッファーレスイオン交換システムが含まれており、乾燥したディスポーザブルカセット内にパッケージされています。E-Gel技術では、ゲルやバッファーの調製、またはゲル染色のステップは必要ありません。サンプルをロードして泳動するだけです。

DNAの移動をライブでモニタリング
E-Gel EXダブルコームゲルは青色光スペクトルの励起波長を持つSYBR Gold II DNAゲル染色剤を含みます。青色光トランスイルミネーターを内蔵したE-Gelパワースナップ電気泳動装置で使用すると、UV照射とは異なり、目に対するリスクやサンプル損傷のリスクがなく、DNAの移動を有害性の低いリアルタイムでモニタリングできます。

ゲルへのアクセスが容易
E-Gel EX Double Combカセットは、ゲルナイフで簡単に開けることができるように設計されています(カタログ番号EI9010)、特定のバンドの切除や、サザンブロット分析用の膜へのゲルの転写が容易に行えます。

核酸マーカー
E-Gel DNAラダーについて詳しく見る›

泳動およびイメージング機器
E-Gel EXダブルコームゲルには、ゲルの泳動と観察用にInvitrogen E-Gelパワースナップ電気泳動システムが必要です。このシステムは、高速で便利なE-Gel EXダブルコームゲルの分離および分析用の電気泳動装置とカメラで構成されています。
E-Gelパワースナップ電気泳動システムについて詳しく見る›

各種フォーマットが利用可能
E-Gelアガロースゲルには、ゲルのパーセンテージ、染色剤、ウェルの各種フォーマットが用意されています。22ウェルE-Gel EXダブルコームゲルは、1%および2%のゲル濃度でご利用になれます。E-Gelアガロースゲル選択ガイド

研究用にのみ使用できます。診断用には使用いただけません。
仕様
Compatible LaddersE-Gel™ 1 Kb Plus Expressラダー
製品タイプアガロースゲル
数量5x10
染色タイプSYBR™ Gold
ウェルデザインダブルコーム
ゲル濃度1%
ゲルタイプE-Gel
分離範囲100 to 5000 bp
ウェル22ウェル
Unit SizeEach
組成および保存条件
一箱にゲル10枚入りです。

必ず室温で保存してください。凍結しないようにし、冷凍庫やその他の非管理環境の近くでは冷点を避けてください。

よくあるご質問(FAQ)

I am not seeing any current when I try to run my E-Gel EX agarose gels. Why is this?

Here are some common reasons why your gel is not running properly:

- Copper contacts in the base are damaged due to improper use. Make sure the copper contacts in the base are intact.
- An expired or defective gel cassette was used.
- The E-Gel EX cassette was not inserted properly into a base.
- An incorrect adaptor was used.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

My E-Gel agarose gel has speckles when viewed in the imager. What should I do?

Here are some suggestions:

- Try cleaning the cassettes with alcohol and Kimwipes wipers.
- Try cleaning the camera lens.
- Try to adjust the exposure time and brightness options of the documentation system you are using.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

My sample is leaking from the wells when running my E-Gel agarose gels. What happened?

Please ensure that you have not overloaded the well and that the wells were not damaged during comb removal.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

I accidentally stored my E-Gel agarose gels at 4 degrees C instead of room temperature. Can I still use them?

While we recommend storage at room temperature, these gels will still be usable. Bring the gels to room temperature prior to the run for optimal conditions.

Find additional tips, troubleshooting help, and resources within ourNucleic Acid Gel Electrophoresis and Blotting Support Center.

What loading buffer should I use for my E-Gel agarose gels?

Loading buffer is optional. Samples can be loaded directly into the wells if no buffer is used, or you can dilute them with deionized water or TE buffer. If you want to use a loading buffer, please see the recipes below:

E-Gel agarose gels (including EX)
10 mM Tris-HCl, pH 7.5
1 mM EDTA
0.005% bromophenol blue
0.005% xylene cyanol FF
E-Gel CloneWell II and E-Gel SizeSelect II agarose gels
10 mM Tris-HCl, pH 7.5
1 mM EDTA

Alternatively, you can use 10X BlueJuice Gel Loading Buffer or TrackIt Loading Buffer. Dilute this buffer 50- to 200-fold to obtain optimal results with E-Gel agarose gels.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.