4X Bolt™ LDS Sample Buffer
4X Bolt™ LDS Sample Buffer
Invitrogen™

4X Bolt™ LDS Sample Buffer

Bolt LDSサンプルバッファー(4X)は、Bis-Tris Plusゲルを用いる変性ゲル電気泳動用のタンパク質サンプルを調製するために使用します。このバッファーには、pH8.4のドデシル硫酸リチウムが含まれており、還元剤の活性を最大限に高めることができます。SDS-PAGEに使用可能なすべてのバッファーと試薬はこちらをご覧くださいBolt詳細を見る
製品番号(カタログ番号)数量
B000710 mL
B0008250 mL
製品番号(カタログ番号) B0007
価格(JPY)
4,600
Each
お問い合わせください ›
数量:
10 mL
Bolt LDSサンプルバッファー(4X)は、Bis-Tris Plusゲルを用いる変性ゲル電気泳動用のタンパク質サンプルを調製するために使用します。このバッファーには、pH8.4のドデシル硫酸リチウムが含まれており、還元剤の活性を最大限に高めることができます。

SDS-PAGEに使用可能なすべてのバッファーと試薬はこちらをご覧ください

Bolt LDSサンプルバッファーには、トラッキング色素として、ブロモフェノールブルーではなく、Coomassie G250およびフェノールレッドが含まれています。Coomassie G250は、MESおよびMOPS SDS泳動バッファーによってシャープな色素フロントを提供し、ブロモフェノールブルーよりもはるかに移動中のイオンフロントに近い位置に移動します。ブロモフェノールブルーの泳動は、MES SDS泳動バッファーでのパプチドより遅くなります。これにより、小さなペプチドはゲルから泳動しません。

使用法:最適な結果を得るために、70℃で10分間、1Xの希釈液(還元または非還元)でサンプルを加熱します。

注:Bolt LDSサンプルバッファーは、使用前に室温(25℃)に戻してください。一般的なサンプルバッファーのSDS量と比べて2倍の量のLDSを含む、高粘性かつ高濃度の溶液です。また、Bolt LDSサンプルバッファーには高濃度グリセロールも含まれています。
研究用にのみ使用できます。診断用には使用いただけません。
仕様
バッファーサンプルローディングバッファー
濃度4X
ゲル適合性Bolt™ Bis-Tris Plusゲル
製品ラインBolt
製品タイプLDSサンプルバッファー
数量10 mL
使用対象 (装置)Bolt
ゲルタイプBis-Tris Plus
Unit SizeEach
組成および保存条件
SERVAブルーG250およびフェノールレッドを使用したpH 8.5リチウムドデシル硫酸塩(LDS)を含むサンプルバッファー(4X)。

保管温度4℃∼25℃。

よくあるご質問(FAQ)

Can I prepare my protein sample with the reducing agent and store it for future use?

DTT is not stable, so it must be added and the reduction performed just prior to loading your samples.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

My LDS or SDS sample buffer precipitates when stored at 4 degrees C. Can I warm it up? Can I store it at room temperature?

Precipitation of the LDS or SDS at 4 degrees C is normal. Bring the buffer to room temperature and mix until the LDS/SDS goes into solution. If you do not want to wait for it to dissolve, you can store the sample buffer at room temperature.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

What are the storage conditions for Bolt gels?

Similar to NuPAGE gels with storage temperatures of 4 to 25 degrees C.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

What is the shelf life for Bolt gels?

The shelf life for Bolt gels is similar to that for NuPAGE gels: 12 months from the date of shipment.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

How are Bolt gels different than NuPAGE gels?

While they are both Bis-Tris based gels, the chemistries are very different since Bolt gels are optimized for western blotting. Another key difference is the wedge well design of the Bolt gels, which allows larger sample volumes to be loaded.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.