Novex™ Tris-Glycine SDS Sample Buffer (2X)

製品番号（カタログ番号）	数量
LC2676	20 mL

製品番号（カタログ番号） LC2676

価格（JPY）

6,300

お問い合わせください ›

20 mL

Novex Tris-Glycine SDSサンプルバッファー（2X）は、トリス-グリシンゲルを用いて変性ゲル電気泳動を行う際にタンパク質サンプルを調製するために使用されます。pH 6.8で、トラッキング色素としてブロモフェノールブルーを含んでいます。

SDS-PAGEに使用可能なすべてのバッファーと試薬をご覧ください

使用法：最適な結果を得るために、1倍希釈（還元または非還元）してサンプルを85℃で2～5分間加熱します。SDSを含むバッファーでサンプルを100℃で加熱すると、タンパク質分解が発生します。

研究用にのみ使用できます。診断用には使用いただけません。

化学物質名または材質Sample Loading Buffer

推奨保存方法Tris-Glycine Sample Buffer (2X) containing sodium dodecyl sulfate (SDS) at pH 6.8 with bromophenol blue.

Store at 2°C to 8°C.

物理的フォームLiquid

製品ラインNovex

数量20 mL

Unit SizeEach

よくあるご質問（FAQ）

Where do I find buffer recipes for your precast protein gels?

The formulations of buffers for our precast protein gels can be found at this link: https://www.thermofisher.com/us/en/home/life-science/protein-biology/protein-gel-electrophoresis/protein-electrophoresis-buffers-reagents.html

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

What is the recipe for traditional Laemmli Buffer?

The Laemmli buffer or 2X SDS Buffer is composed of the following: 100 mM Tris HCl , pH 6.8, 200 mM dithiothreitol, 4% SDS, 0.2% bromophenol blue, 20% glycerol. 2X SDS gel loading buffer lacking dithiothreitol can be stored at room temperature. Dithiothreitol should then be added, just before use.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

If a Tricine gel is accidentally run with buffers used in the Tris-Glycine system, what will happen and why?

If the Tricine gel is run with Tris-Glycine sample buffer, the bands will behave abnormally and resolve poorly. If the Tricine gel is accidentally run with Tris-Glycine running buffer, the gel will take longer to run and the resolution, especially for smaller proteins, will be worse than when the proteins are run on a Tris-Glycine gel with Tris-Glycine buffers. This is due to a combination of increase in stack area size (glycine is a slower ion than Tricine) and the higher ionic strength of the Tricine gel.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

Why is LDS (lithium dodecyl sulfate) used in the 4X NuPAGE sample buffer instead of SDS?

SDS in a 4X sample buffer concentrate tends to precipitate from solution and to make the solution viscous and difficult to pipette. The LDS is much more soluble.

Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.

Can I use CTAB rather than SDS in my sample buffer?

No, CTAB will not work with any of our gels except for the NuPAGE Tris-Acetate gels. To use CTAB, you would need to use a running buffer of 50 mM acetic acid and 50 mM beta-alanine in equal concentrations. You would also need to switch the electrodes. Since CTAB is a cationic detergent, this would establish conditions for running a basic protein towards the anode (into the gel).

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

引用および参考文献 (1)

引用および参考文献

Abstract

Identification of components of protein complexes using a fluorescent photo-cross-linker and mass spectrometry.

Authors: Wine Robert N; Dial John M; Tomer Kenneth B; Borchers Christoph H;

Journal:Anal Chem

PubMed ID:12033289

'This study describes a novel method for improving the specific recognition, detection, and identification of proteins involved in multiprotein complexes. The method is based on a combination of coimmunoprecipitation, chemical cross-linking, and specific fluorescent tagging of protein components in close association with one another. Specific fluorescent tagging of the protein ... More