FP One-Step Reference Kit
Product Image

FP One-Step Reference Kit

多くの蛍光偏光(FP)測定装置では、リーダーの内部校正に標準物質を使用する必要があります。FPワンステップ参照キットには、シングルチューブまたはマイクロプレートハイスループットスクリーニング(HTS)機器で緑色または赤色のFP標準として使用する試薬が含まれています。緑色試薬は、以下のフィルターを使用して測定に使用できます:励起波長488詳細を見る
製品番号(カタログ番号)数量
P30881 Kit
製品番号(カタログ番号) P3088
価格(JPY)
44,200
キャンペーン価格
Ends: 27-Mar-2026
73,800
割引額 29,600 (40%)
Each
お問い合わせください ›
数量:
1 Kit
多くの蛍光偏光(FP)測定装置では、リーダーの内部校正に標準物質を使用する必要があります。FPワンステップ参照キットには、シングルチューブまたはマイクロプレートハイスループットスクリーニング(HTS)機器で緑色または赤色のFP標準として使用する試薬が含まれています。緑色試薬は、以下のフィルターを使用して測定に使用できます:励起波長488 nm ± 5 nm、発光は中は535 nm ± 5 nm(または同等)。赤色試薬は、以下のフィルターを使用して測定に使用できます:励起波長525 nm ± 5 nm、発光は中は590 nm ± 5 nm(または同等)。
研究用にのみ使用できます。診断用には使用いただけません。
仕様
使用対象 (装置)Beacon 2000 Microplate Reader
数量1 Kit
推奨保存方法All kit components should be stored at 20-30°C.
出荷条件Approved for shipment at Room Temperature or on Wet or Dry Ice
Unit SizeEach

よくあるご質問(FAQ)

What are the common issues encountered with FP assays?

-No assay window: Check that your instrument is designed to do FP experiments.
-Poor discrimination between the minimum and maximum mP Control (both include the receptor): This may be an indication of the quality of the receptor. Do not make single use aliquots of the receptor or store diluted.
-The type of microplate is critical: Please see if the protocol specifies untreated polystyrene or NBS-coated plates. If the plate binds the fluorescent substrate, it cannot freely rotate and the mP reading will always be high. White plates cannot be used for FP assays. Avoid the use of silanized pipette tips and vials.
-The “No Receptor Control' (free Fluormone/Tracer) should have much higher RFU values compared to buffer alone. If not, there is a problem with the instrument setup or less commonly with the Fluormone/Tracer.
-If the free Fluormone/Tracer mP value is greater than 100 mP or negative, please refer to the user manual for your instrument and reset the G factor.

Find additional tips, troubleshooting help, and resources within our Drug Discovery & Development Support Center.

What is the best type of microplate reader for fluorescence polarization (FP) assays?

For FP assays, plate readers must specifically have FP built in. Please see our instrument compatibility portal (http://www.thermofisher.com/us/en/home/industrial/pharma-biopharma/drug-discovery-development/dd-misc/instrument-compatibility-portal.html).

Find additional tips, troubleshooting help, and resources within our Drug Discovery & Development Support Center.

How can I test the fluorescence polarization (FP) settings of my microplate reader before doing the assay?

We offer a FP One-Step Reference Kit (https://www.thermofisher.com/order/catalog/product/P3088) to detect in green (Ex/Em = 488/535 nm) and red (Ex/Em = 525/590 nm) emission ranges, suitable for the PolarScreen Green and Red Assays. The alternative is to perform the Controls in the respective assay kit prior to performing the actual assay using test compounds.

Find additional tips, troubleshooting help, and resources within our Drug Discovery & Development Support Center.