Annexin V Ready Flow Conjugates for Apoptosis Detection
Annexin V Ready Flow Conjugates for Apoptosis Detection
Invitrogen™

Annexin V Ready Flow Conjugates for Apoptosis Detection

Annexin Vコンジュゲート染色により、フローサイトメトリーを介してアポトーシス細胞を簡単に測定できます。
製品番号(カタログ番号)励起/発光コンジュゲート
R37177410/455青色Pacific Blue
R37174495/519GreenAlexa Fluor 488
R37175650/665遠赤色Alexa Fluor 647
R37176650/660RedAPC(アロフィコシアニン)
製品番号(カタログ番号) R37177
価格(JPY)
41,600
Each
お問い合わせください ›
励起/発光:
410/455
色:
青色
コンジュゲート:
Pacific Blue
すぐに使用可能なAnnexin V Ready Flowスタンドアローンコンジュゲート染色試薬の利便性を体感してください。フローサイトメトリーを使用したアポトーシス細胞と非アポトーシス細胞の間で、最大100倍の蛍光シグナル強度を示します。コンジュゲート染色試薬の希釈、計量、ピペット操作は必要ありません;細胞にわずか1滴添加し、インキュベートして分析するだけです。
アネキシンVコンジュゲートは、アポトーシスの中間期指標であるホスファチジルセリンの外在化を研究するための迅速で信頼性の高い検出法を提供します。フローサイトメトリーで測定した当社の蛍光アネキシンVコンジュゲートで染色したアポトーシス細胞と非アポトーシス細胞の蛍光強度の差は、通常約100倍です。

Annexin V Ready Flowコンジュゲートは、すぐに使用可能な、サンプルへの直接アポトーシス細胞染色試薬です。5 mMのCa2+含有細胞培養培地またはアネキシン結合バッファーでドロッパーボトルから1 x 106細胞に直接1滴を追加し(カタログ番号V13246またはBMS500BB)、インキュベート、および分析を行います。従来のアネキシン染色プロトコルは、追加の5 μLのアネキシンコンジュゲートを、Ready Flowドロッパーボトルからの1滴の追加に置換することで、代替法として使用できます。

Annexin V Alex Fluor 488コンジュゲートは、495 nmで励起可能で、発光ピークは519 nmです。
Annexin V Alex Fluor 647コンジュゲートは、650 nmで励起可能で、発光ピークは 665nmです。
Annexin V APCコンジュゲートは、660 nmで励起可能で、発光ピークは650 nmです。
Annexin V Pacific Blueコンジュゲートは、455 nmで励起可能で、発光ピークは410 nmです。
アポトーシス細胞を検出するためのアネキシンV染色は、生細胞および生組織でのみ可能です。サンプルを染色後に固定する場合は、シグナルの一時的な保持を実現するために特定の条件が必要です。これには、アルコールを含まないアルデヒドベースの固定法の使用、Ca2+を含むバッファーの使用、界面活性剤/界面活性剤(洗剤)の回避などが挙げられます。また、アポトーシスアッセイにおけるホスファチジルセリンとアネキシンVとの結合を促進する濃縮アネキシン結合バッファーもご用意しています。

For Research Use Only. Not for use in diagnostic procedures.
仕様
青色
概要Annexin V Pacific Blue Ready Flow Conjugate
励起/発光410/455
フローサイトメーターレーザーラインバイオレット
使用対象 (装置)フローサイトメーター
キット内容ドロッパーボトル2本、室温で保存
製品タイプReady Flow Conjugate
数量120 reactions
出荷条件室温
コンジュゲートPacific Blue
Unit SizeEach
組成および保存条件
室温保存。

よくあるご質問(FAQ)

I would like to label only 100 µL of sample of the same cell density using a Ready Flow product. The manual notes 2 drops per 1 mL (1 X 10E6 cells/mL). May I scale down for smaller volumes?

Yes, you may scale up or down as needed, but we recommend keeping the cell density the same. There are 41 µL per drop, so 2 drops is 82 µL (for the 1 mL of sample). You need to only scale down for this 100 µL volume, which would be 8.2 µL.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

What is the concentration of dye/reagent in the Ready Flow products?

The amount of dye or reagent in the Ready Flow products is proprietary. If you need to consider the exact amount of dye or reagent for your experiment, each of the Ready Flow reagents is available as a standalone product.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

Can I use the ReadyProbes reagents for flow cytometry?

This is not recommended. The ReadyProbes reagents were developed for imaging applications whereas the Ready Flow reagents were optimized for flow cytometry.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.