Flp-In™-Jurkat Cell Line
Product Image
Invitrogen™

Flp-In™-Jurkat Cell Line

Flp-In™ Cell Linesは、Flp-In™発現ベクターから目的のタンパク質を発現する安定した細胞株を迅速に生成するために設計されています。これらの細胞には、転写によって活発なゲノム遺伝子座で安定的に統合された単一のFRT部位が含まれます。Flp-In™発現ベクターのターゲット統合により、目的の遺伝子の高レベルでの発現が保証されます。同系の安定細胞株の生成には6種類のFlp-In™ Cell詳細を見る
製品番号(カタログ番号)数量
R762071 mL
製品番号(カタログ番号) R76207
価格(JPY)
204,200
Each
お問い合わせください ›
数量:
1 mL
Flp-In™ Cell Linesは、Flp-In™発現ベクターから目的のタンパク質を発現する安定した細胞株を迅速に生成するために設計されています。これらの細胞には、転写によって活発なゲノム遺伝子座で安定的に統合された単一のFRT部位が含まれます。Flp-In™発現ベクターのターゲット統合により、目的の遺伝子の高レベルでの発現が保証されます。同系の安定細胞株の生成には6種類のFlp-In™ Cell Linesを利用でき、テトラサイクリン制御の安定した細胞株の生成にはFlp-In™ T-Rex™ Cell Lineを利用できます。Flp-In™-cV-1、Flp-In™-293、Flp-In™-BHK、Flp-In™-Jurkat、およびFlp-In™-3T3 Cell Linesは、親細胞株をpFRT/lacZeoでトランスフェクションし、安定したゼオシン™-耐性クローンを選択することにより作成されました。Flp-In-CHO™細胞株は、CHO細胞をpFRT/lacZeo2でトランスフェクションし、ゼオシン™耐性クローンを選択することで作成されます。Flp-In™ T-REx™-293 Cell Lineには、安定して統合されたpFRT/lacZeoおよびpcDNA™6/TR(T-REx™ Systemから)が含まれています。Flp-In™ Cell LinesとFlp-In™発現ベクターおよびFlp組換えベクター、pOG44の相互トランスフェクションにより、発現ベクターのすべての細胞内の同じ遺伝子座へのターゲット統合が行われ、均一レベルでの遺伝子発現が確実に行われます。

Flp-In™ベクター/細胞株の組み合わせの選択
Flp-In™-CV-1、Flp-In™-293、Flp-In™-CHO、およびFlp-In™-Jurkat Cell Lines(図1)は、CMVプロモーター(pcDNA™5/FRT、pcDNA5/FRT/V5-His-TOPO™、およびpSecTag/FRT/V5-His-TOPO™)から遺伝子を発現するFlp-In™ベクターで良好に機能します。Flp-In™-BHK細胞およびFlp-In™-3T3細胞には、CMVプロモーターをダウン制御する傾向があります。そのため、これらの細胞株にはEF-1αプロモーター(pEF5/FRT/V5-DEST™およびpEF5/FRT/V5-D-TOPO™)が含まれるFlp-In™ベクターを使用することをお勧めします。
研究用にのみ使用できます。診断用には使用いただけません。
仕様
細胞株Flp-in™-Jurkat細胞株
数量1 mL
ヒト
製品ラインFlp-In
タンパク質タグpSec
Unit SizeEach
組成および保存条件
3 x 106細胞は、1 mlの90 %の完全培地および10 %のDMSOで凍結して供給されます。細胞は液体窒素に保存する必要があります。細胞は、適切に保存されている場合、6ケ月間安定していることが保証されます。

よくあるご質問(FAQ)

I have your Flp-In Jurkat cells that I tried to thaw using the protocol suggested in your manual, but got very poor viability. What do you think went wrong?

Flp-In Jurkat cells are a little tricky to handle and are very sensitive to centrifugation. You may try the following protocol to thaw the cells:

- Thaw 1 vial of cells into a T25 flask containing 5-7 mL of fresh medium (without selection). Do not spin down the cells to remove the DMSO at this point, as they are very sensitive to handling (including centrifugation). Typically, there is a lot of debris present upon thaw.
- 24 hours post-thaw, spin down the cells at 900 rpm for 2-3 minutes and resuspend gently into 5 mL of fresh medium. Spinning down the entire volume of cells greatly reduces the amount of debris in the culture.
- At day 5 or 6, it is okay to add the selection. Continue to passage the cells (spinning the cells down) every 2-3 days for a total of 1.5 weeks, each time resuspending back into only 5-7 ml of fresh medium in a T25 flask to build up the cell density. The Jurkat cells are very small and clumpy, and they expand very slowly.
- Attempt to expand the cells into a T75 flask only after about 1.5 weeks.

Is multiple integration of the Flp-In expression construct possible? How do you screen for multiple integrants, and how stable is the Flp-In expression cell line?

In theory, one can get multiple integrations of the Flp-In expression construct—an FRT-specific integration event and a random, second-site integration. However, random integration is a relatively uncommon event. Limiting the amount of DNA in the transfection will reduce the chance of second-site integration. We have transfected 293 cells (lacking the FRT site) with the pcDNA5/FRT vector and have identified one potential second-site integrant after screening over 200 clones. DNA integrations can be detected by Southern blot. A single integrant will display a single band; double: two; triple: three, etc. We have maintained a number of Flp-In expression cell lines for over four months and have not observed any loss of the Flp-In expression construct, whether hygromycin selection was maintained or not.

Find additional tips, troubleshooting help, and resources within our Protein Expression Support Center.

What kind of Flp-In T-REx cell lines do you offer?

We offer the Flp-In T-REx system that contains pFRT/lacZeo and pcDNA6/TR stably integrated into HEK 293 cells. This cell line has been functionally tested for its ability to regulate expression.

引用および参考文献 (1)

引用および参考文献
Abstract
The MLL fusion gene, MLL-AF4, regulates cyclin-dependent kinase inhibitor CDKN1B (p27kip1) expression.
Authors:Xia ZB, Popovic R, Chen J, Theisler C, Stuart T, Santillan DA, Erfurth F, Diaz MO, Zeleznik-Le NJ,
Journal:Proc Natl Acad Sci U S A
PubMed ID:16169901
MLL, involved in many chromosomal translocations associated with acute myeloid and lymphoid leukemia, has >50 known partner genes with which it is able to form in-frame fusions. Characterizing important downstream target genes of MLL and of MLL fusion proteins may provide rational therapeutic strategies for the treatment of MLL-associated leukemia. ... More