E-Gel™ Power Snap Electrophoresis System
E-Gel™ Power Snap Electrophoresis System
E-Gel™ Power Snap Electrophoresis System
E-Gel™ Power Snap Electrophoresis System
Invitrogen™

E-Gel™ Power Snap Electrophoresis System

オールインワンのInvitrogen E-Gel Power Snap電気泳動システムは、DNAサンプルのローディングからゲルの観察まで、速くて便利なE-Gelアガロースゲル電気泳動用に設計されています。ドライプレキャストE-Gelアガロースゲル技術を使用すると、わずか10分でDNAサンプルを泳動し、リアルタイムでサンプルの分離を観察できます。DNAサンプルの分離とゲルの撮像を1つのワークフローに完全に統合した唯一のベンチトップ型システムです詳細を見る
製品番号(カタログ番号)数量
G83001システム
製品番号(カタログ番号) G8300
価格(JPY)
329,600
Each
お問い合わせください ›
数量:
1システム
オールインワンのInvitrogen E-Gel Power Snap電気泳動システムは、DNAサンプルのローディングからゲルの観察まで、速くて便利なE-Gelアガロースゲル電気泳動用に設計されています。ドライプレキャストE-Gelアガロースゲル技術を使用すると、わずか10分でDNAサンプルを泳動し、リアルタイムでサンプルの分離を観察できます。DNAサンプルの分離とゲルの撮像を1つのワークフローに完全に統合した唯一のベンチトップ型システムです。

E-Gel Power Snap電気泳動システムの特長:
•オールインワンシステムで電気泳動と画像の取得を効率化できます
• ドライプレキャストE-Gelアガロースゲルを用いると、わずか10分でDNAを分離できます
• リアルタイムでDNAサンプルを観察および撮影できます
• 効率的で便利な卓上使用向けの設計です

小型、高速、高性能
オールインワンのE-Gel Power Snap電気泳動システムは、小型の軽量ベンチトップシステムの中にDNAゲル電気泳動とゲルの撮像に必要なすべての機能を備えています。電気泳動装置には、電源装置、ブル-ライトトランスイルミネーター、褐色フィルターが含まれます。これにより、SYBR SafeまたはSYBR Gold II DNA染色剤であらかじめ染色したE-Gelアガロースゲルでのゲル分離とリアルタイムのサンプル追跡が可能になります。装置には、適合するE-Gelアガロースゲルの種類ごとにプログラム済みのプロトコルが付属しています。

即時画像取得
付属の使いやすいE Gel Power Snapカメラを使用すると、高解像度のE-Gelアガロースゲル画像を簡単に取得できます。カメラは電気泳動装置に直接接続でき、外部電源やデスクトップコンピューターへの接続は不要です。これにより、実験台から離れずに、画像をその場で自由に撮影できます。

便利な作り
E-Gel Power Snapカメラのタッチスクリーンとオンボードソフトウェアには、直感的に操作できるインターフェースが備わっているため、迅速なゲル画像の取得と編集が可能です。Power Snap内部メモリーストレージを使用してカメラの数カ月間分の画像を保存し、外部USBメモリーデバイスに画像を簡単に転送できます。

ドライプレキャストE-Gelアガロースゲルの卓越した利便性
ドライ、プレキャスト、染色済みE-Gelアガロースゲルを使用するとDNAサンプルをわずか10分で泳動できます。E-Gelドライプレキャストアガロースゲル技術では、ゲルの調製や染色を必要としないため、スピードと利便性があります。E-Gelアガロースゲルにはさまざまなゲル濃度があり、2種類のDNA染色を選択できます。

E-Gel Power Snap電気泳動システムは、E-Gel EX、E-Gel SYBR Safe、E-Gel Go!、E-Gel CloneWell II、E-Gel SizeSelect IIゲルなど、すべての低スループットE-Gelプレキャストアガロースゲルに対応しています*。

クローニングワークフローに最適
E-Gel Power Snap電気泳動装置のトランスイルミネーターから放出される青色光は、ユーザーの安全性を最大限に高め、E-Gel CloneWell IIアガロースゲルと併用するとエチジウムブロマイド/UVよりもクローニング効率が向上します。

高速かつ効率的なクローニングワークフローを実現するE-Gel CloneWell IIアガロースゲルの使用方法の詳細をご覧ください。

* E-Gel Power Snap電気泳動システムは、エチジウムブロマイド染色E-Gelシングルコームおよびダブルコームアガロースゲルカセットにも対応します。エチジウムブロマイド染色ゲルは、E-Gel Power Snapカメラによる撮像には適していません。

研究用にのみ使用できます。診断用には使用いただけません。
仕様
数量1システム
出荷条件室温
最大電圧48 V DC
タイプ電気泳動システム
Unit SizeEach
組成および保存条件
• 電気泳動装置1台
• カメラ装置1台
• 電源アダプター1個
• 観察眼鏡1本
• E-Gel Go!1個アダプター

よくあるご質問(FAQ)

My E-Gel agarose gel has speckles when viewed in the imager. What should I do?

Here are some suggestions:

- Try cleaning the cassettes with alcohol and Kimwipes wipers.
- Try cleaning the camera lens.
- Try to adjust the exposure time and brightness options of the documentation system you are using.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

My sample is leaking from the wells when running my E-Gel agarose gels. What happened?

Please ensure that you have not overloaded the well and that the wells were not damaged during comb removal.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

I accidentally stored my E-Gel agarose gels at 4 degrees C instead of room temperature. Can I still use them?

While we recommend storage at room temperature, these gels will still be usable. Bring the gels to room temperature prior to the run for optimal conditions.

Find additional tips, troubleshooting help, and resources within ourNucleic Acid Gel Electrophoresis and Blotting Support Center.

What loading buffer should I use for my E-Gel agarose gels?

Loading buffer is optional. Samples can be loaded directly into the wells if no buffer is used, or you can dilute them with deionized water or TE buffer. If you want to use a loading buffer, please see the recipes below:

E-Gel agarose gels (including EX)
10 mM Tris-HCl, pH 7.5
1 mM EDTA
0.005% bromophenol blue
0.005% xylene cyanol FF
E-Gel CloneWell II and E-Gel SizeSelect II agarose gels
10 mM Tris-HCl, pH 7.5
1 mM EDTA

Alternatively, you can use 10X BlueJuice Gel Loading Buffer or TrackIt Loading Buffer. Dilute this buffer 50- to 200-fold to obtain optimal results with E-Gel agarose gels.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

How do I acquire and analyze data for my E-Gel agarose gels?

We offer our E-Editor Software, which can help you align images after a gel run. The E-Editor 2.0 Software is only available for PCs, but the older E-Gel 96 Editor software is still available for the Mac operating system and can align images from E-Gel 96 and E-PAGE 96 agarose gels. However, the original software is not compatible with E-Gel 48 or E-PAGE 48 agarose gels. Please go to www.thermofisher.com and enter "E-Editor software" in the main search to download the E-Editor Software. You can use the E-Gel Imager System for data analysis.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.