Review the work of monitoring ionic contamination levels for water and steam contaminants across the typical water chemistry matrices, including:
- Pure Water
- Pure Water with Amine Additives
- Borated Water
- Closed Cooling Water
- Environmental Samples
See recent improvements in detection limits, sample handling, and blank stability.
Study discussions on a Single Pass AutoNeutralization by using the high static capacity of a 4 mm Thermo Scientific Dionex AERS 500 Anion Electrolytically Regenerated Suppressor to neutralize the base samples in a single pass.
Learn how a high-volume direct injection technique is used to achieve sensitive detection at low to sub-μg/L levels without the use of a concentrator column, sample loading pump, and additional valve.
Read the instructions for installing a trace anion application using the Thermo Scientific Dionex AutoPrep and Thermo Scientific Dionex EWP Electrolytic Water Purifier modules on the Thermo Scientific Dionex ICS-5000+ HPIC system.
Study the separation of iron (III), copper (II), nickel (II), and zinc (II) complexes with PDCA followed by postcolumn PAR reaction and absorbance detection at 530 nm.
See the description of a simple SEC analysis method for the determination of low concentrations (<20 µg/L) of polyacrylic acid (PAA) in secondary feed water.
View the update of AN153. It uses a hydroxide gradient similar to but faster than the previous program and separates a new set of 14 anions.
Review this description of an IC method that incorporates the most recent advances for trace sodium determination in power plant matrices.