Solid Phase Extraction (SPE) cartridges & well plates

Obtain reliable analytical results. Remove sample uncertainty

Chromatographers use solid phase extraction (SPE) as a sample preparation method-of-choice to improve analytical results by removing interfering compounds, extracting the analyte in a preferred solvent, and concentrating the analyte. Thermo Scientific SPE sample preparation products address the differing sample extraction requirements required of industries including pharmaceutical, biotech, clinical research, environmental, forensics, and food safety.

Thermo Scientific HyperSep SPE products—a broad range of standard cartridges and well plates in a multitude of selectivity’s, sizes and formats.

Thermo Scientific SOLA & SOLAμ SPE products—an innovation that delivers highly reproducible extractions of low-volume, viscous, biological samples in high-throughput labs.

View SPE selector chart


Thermo Scientific SPE cartridges and plates

Reversed phase non-polar (hydrophobic) SPE cartridges & well plates

Extraction accomplished by non-polar, non-polar interactions and Van der Waals or dispersion force

Characteristics Material Typical applications
  • Next generation SPE polymeric material
  • Surface area 700 to 900m2/g
  • Particle size 19 to 25µm
  • Pore size 30 to 110Å
Polystyrene divinylbenzene material surface functionalized with pyrolidone
  • Bioanalytical workflows
Extraction of:
  • Polar and non-polar analytes
  • Drugs and metabolites in biological matrices
  • Desalting of peptides in serum, plasma, or biological fluids

SOLA & SOLAµ HRP SPE Cartridges and Well Plates

Bed Weight (mg) Column Volume (mL) Retain PEP Cat No. Quantity
2 mg 1 mL 60209-001 1 Each 96-Well Plate
10 mg 2 mL 60309-001 1 Each 96-Well Plate
10 mg 1 mL 60109-001 Pack of 100 Cartridge
Characteristics Material Typical applications
A versatile polymeric material for the retention of polar and non-polar analytes
  • Surface area 550 to 750m2/g
  • Particle size 40 to 60µm
  • Pore size 55 to 90Å
Polystyrene divinylbenzene material surface modified with urea groups Extraction of:
  • Drugs and metabolites in biological matrices
  • Environmental samples
  • Desalting of peptides in serum, plasma, or biological fluids

HyperSep Retain PEP SPE Cartridges

Bed Weight (mg) Column Volume (mL) Retain PEP Cat No. Quantity
30 1 60107-201 100 Pack
30 3 60107-202 50 Pack
60 3 60107-203 50 Pack
60 6 60107-208 30 Pack
100 3 60107-217 50 Pack
100 6 60107-207 30 Pack
150 3 60107-209 30 Pack
150 6 60107-211 30 Pack
200 3 60107-204 50 Pack
200 6 60107-212 30 Pack
500 3 60107-205 50 Pack
500 6 60107-206 30 Pack
500 15 60107-219 20 Pack
1,000 25 60107-215 20 Pack
1,000 6 60107-218 30 Pack
2,000 25 60107-214 20 Pack

Note: For bed weights less than 30mg please refer to SOLA SPE products

Retain PEP 96 Well Plates

Bed Weight (mg) Well Volume (mL) Retain PEP Cat No. Format Quantity
30 1 60306-207 Fixed 1 Each
60 1 60306-208 Fixed 1 Each
30 1 60303-207 Removable 1 Each
60 1 60303-208 Removable 1 Each

Note: For bed weights less than 30mg please refer to SOLA SPE products

Characteristics Material Typical applications
For non-polar to moderately polar compounds
  • Surface area 470 to 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
  • Highly retentive alkyl-bonded silica phase
Extraction of:
  • Drugs and their metabolites in biological matrices
  • Trace organics in environmental water samples
  • Toxins in food samples

HyperSep C18 SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat No. Quantity
25 1 60108-376 100 Pack
50 1 60108-390 100 Pack
100 1 60108-302 100 Pack
100 3 60108-765 100 Pack
200 3 60108-303 50 Pack
500 3 60108-304 50 Pack
500 6 60108-305 30 Pack
500 10 60108-786 50 Pack
1,000 6 60108-301 30 Pack
1,000 15 60108-776 20 Pack
2,000 15 60108-701 20 Pack
2,000 25 60108-780 20 Pack
5,000 25 60108-702 20 Pack
10,000 75 60108-703 10 Pack

HyperSep C18 96 Fixed/Removable Well Plates

Bed Weight (mg) Well Volume (mL) Fixed Cat. No. Removable Cat No. Quantity
10 1 60307-201 60300-425 1 Each
25 1 60307-202 60300-426 1 Each
50 1 60307-203 60300-427 1 Each
100 1 60307-204 60300-428 1 Each
Characteristics Material Typical applications
Less retentive alternative to C18 for non-polar to moderately polar compounds
  • Surface area 470 to 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
  • A silica-based material used for hydrophobic compounds which tend to be retentive on C18 columns
Extraction of:
  • Drugs and their metabolites in biological matrices
  • Trace organics in environmental water samples
  • Toxins in food samples

HyperSep C8 SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
50 1 60108-391 100 Pack
100 1 60108-392 100 Pack
200 3 60108-393 50 Pack
500 3 60108-309 50 Pack
500 6 60108-394 30 Pack
1,000 6 60108-427 30 Pack
2,000 15 60108-704 20 Pack
5,000 25 60108-705 20 Pack
10,000 75 60108-706 10 Pack

HyperSep C8 96 Fixed/Removable Well Plates

Bed Weight (mg) Well Volume (mL) Fixed Cat. No. Removable Cat. No. Quantity
10 1 60307-211 60300-445 1 Each
25 1 60307-212 60300-446 1 Each
50 1 60307-213 60300-447 1 Each
100 1 60307-214 60300-448 1 Each
Characteristics Material Typical applications
Alternative selectivity for retention of basic compounds
  • Surface area 470 to 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
A silica-based material which offers alternative selectivity for aromatic compounds due to the presence of the benzene ring within the structure. Extraction of:
  • Benzodiazepines in biological matrices
  • Aromatic compounds

HyperSep Phenyl SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
50 1 60108-516 100 Pack
100 1 60108-386 100 Pack
200 3 60108-387 50 Pack
500 3 60108-388 50 Pack
500 6 60108-389 30 Pack
1,000 6 60108-517 30 Pack
2,000 15 60108-707 20 Pack
5,000 25 60108-708 20 Pack
10,000 5 60108-709 10 Pack

HyperSep Phenyl 96 Fixed/Removable Well Plates

Bed Weight (mg) Column Volume (mL) Fixed Cat. No. Removable Cat. No. Quantity
10 1 60307-221 60300-685 1 Each
25 1 60307-222 60300-686 1 Each
50 1 60307-223 60300-687 1 Each
100 1 60307-224 60300-688 1 Each

Mixed-mode—non-polar/ion exchange—SPE cartridges & well plates

Extraction accomplished using two functional groups: non-polar and ion exchange, which employs both hydrophobic and ionic retention. This phase is ideal for samples with complex structures.

Characteristics Material Typical applications
Polymeric material for the retention of weak acids
  • Surface area 550 to 750m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å

Mixed mode Strong cation exchanger functionalized with quaternary groups

Polystyrene divinylbenzene material surface functionalized with carboxylic acid  

  • Bioanalytical workflows
Extraction of:
  • Weak Acids
  • Drugs and metabolites in biological matrices
  • Desalting of peptides in serum, plasma, or biological fluids
60109-003 100 Pack SOLA SAX SPE Cartridge, 10mg/1mL
60209-003 Each SOLAµ SAX SPE 96-Well Plate, 2mg/1mL
60309-003 Each SOLA SAX SPE 96-Well Plate, 10mg/2mL
Characteristics Material Typical applications
Polymeric material for the retention of weak bases
  • Surface area 550 to 750m2/g
  • Particle size 19 to 25µm
  • Pore size 30 to 110Å
Next generation Polystyrene divinylbenzene material surface functionalized with sulphonate groups
  • Bioanalytical workflows
Extraction of:
  • Weak bases
  • Drugs and metabolites in biological matrices
  • Desalting of peptides in serum, plasma, or biological fluids
60109-002 100 Pack SOLA SCX SPE Cartridge, 10mg/1mL
60209-002 Each SOLAµ SCX SPE 96-Well Plate, 2mg/1mL
60309-002 Each SOLA SCX SPE 96-Well Plate, 10mg/2mL
Characteristics Material Typical applications
Polymeric material for the retention of strong acids
  • Surface area 780 to 840m2/g
  • Particle size 19 to 25µm
  • Pore size 30Å
Mixed mode weak anion exchanger
Polystyrene divinylbenzene material surface functionalized with tertiary amine
  • Bioanalytical workflows
Extraction of:
  • Strong acids
  • Drugs and metabolites in biological matrices
  • Desalting of peptides in serum, plasma, or biological fluids
60109-005 100 Pack SOLA WAX SPE Cartridge, 10mg/1mL
60209-005 Each SOLAµ WAX SPE 96-Well Plate, 2mg/1mL
60309-005 Each SOLA WAX SPE 96-Well Plate, 10mg/2mL
Characteristics Material Typical applications
Polymeric material for the retention of strong bases
  • Surface area 780 to 840m2/g
  • Particle size 19 to 25µm
  • Pore size 30Å
Mixed mode weak cation exchanger Polystyrene divinylbenzene material surface functionalized with carboxylic acid  
  • Bioanalytical workflows
Extraction of:
  • Strong bases
  • Drugs and metabolites in biological matrices
  • Desalting of peptides in serum, plasma, or biological fluids
60109-004 100 Pack SOLA WCX SPE Cartridge, 10mg/1mL
60209-004 Each SOLAµ WCX SPE 96-Well Plate, 2 mg/1mL
60309-004 Each SOLA WCX SPE 96-Well Plate, 10 mg/2mL
Material Characteristics Typical applications
A versatile polymeric material for the enhanced retention of basic compounds
  • Surface area 550 to 750m2/g
  • Particle size 40 to 60µm
  • Pore size 55 to 90Å
DVB material modified with sulfonic acid functional group for retention of basic Analysis of a wide range of drugs of abuse including basic and neutral drugs from biological matrices.

HyperSep Retain CX SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
30 1 60107-301 100 Pack
30 3 60107-302 50 Pack
30 3 60107-303 50 Pack
60 6 60107-308 30 Pack
100 3 60107-317 50 Pack
100 6 60107-307 30 Pack
150 3 60107-309 30 Pack
200 3 60107-311 30 Pack
200 6 60107-304 50 Pack
200 6 60107-314 30 Pack
500 3 60107-305 50 Pack
500 6 60107-306 30 Pack
500 15 60107-319 20 Pack
1,000 25 60107-315 20 Pack
1,000 6 60107-318 30 Pack
2,000 25 60107-312 20 Pack

Note: For bed weights less than 30mg please refer to SOLA SPE products

HyperSep Retain CX 96 Fixed Well Plates

Bed Weight (mg) Column Volume (mL) Retain CX Cat. No. Quantity
30 1 60306-303 1 Each
60 1 60306-304 1 Each

Note: For bed weights less than 30mg please refer to SOLA SPE products

Material Characteristics Typical applications
For retention of acidic compounds
  • Surface area 550 to 750m2/g
  • Particle size 40 to 60µm
  • Pore size 55 to 90Å
A versatile polymeric material for the enhanced retention of acidic compounds. Analysis of a range of acidic drugs of abuse from biological matrices, such as THC and its metabolites.

HyperSep Retain-AX SPE Cartridges

Bed Weight (mg) Column Volume (mL) Retain AX Quantity
30 1 60107-401 100 Pack
30 3 60107-402 50 Pack
60 3 60107-403 50 Pack
60 6 60107-408 30 Pack
100 3 60107-417 50 Pack
100 6 60107-407 30 Pack
150 3 60107-413 30 Pack
150 6 60107-411 30 Pack
200 3 60107-404 50 Pack
200 6 60107-412 30 Pack
500 3 60107-405 50 Pack
500 6 60107-406 30 Pack
500 15 60107-419 20 Pack
1,000 25 60107-415 20 Pack
1,000 66 60107-418 30 Pack
2,000 25 60107-414 20 Pack

Note: For bed weights less than 30mg please refer to SOLA SPE products on page 1-011.

HyperSep Retain AX 96 Removable Well Plate

Bed Weight (mg) Volume (mL) Retain CX Cat. No. Quantity
30 1 60303-407 1 Each
60 1 60303-408 1 Each

Note: For bed weights less than 30mg please refer to SOLA SPE products

Mixed-mode—normal phase/ion exchange—SPE cartridges & well plates

Phase accomplishes extraction using two functional groups: non-polar and ion exchange, which employs both hydrophobic and ionic retention. This mode deal for samples with complex structures

Material Characteristics Typical applications
Non-polar and anionic characteristics for improved analysis of basic drugs of abuse
  • Surface area 470 to 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
A mixed-mode material based on two functional groups bonded to the silica base: a reversed phase C8 group and a strong cation exchanger.
  • Analysis of a range of basic drugs of abuse from biological matrices

HyperSep Verify CX SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
50 1 60108-741 100 Pack
130 1 60108-719 100 Pack
130 10 60108-769 50 Pack
200 3 60108-777 50 Pack
200 6 60108-722 50 Pack
200 10 60108-742 50 Pack
300 3 60108-720 50 Pack
500 3 60108-721 50 Pack
500 6 60108-723 30 Pack
1,000 6 60108-724 30 Pack

HyperSep Verify CX 96 Fixed/Removable Well Plates

Bed Weight (mg) Column Volume (mL) Fixed Cat. No. Removable Cat. No. Quantity
10 1 60307-261 60300-805 1 Each
25 1 60307-262 60300-806 1 Each
50 1 60307-263 60300-807 1 Each
100 1 60307-264 60300-808 1 Each
Material Characteristics Typical applications
Non-polar and cationic characteristics for improved analysis of acidic drugs of abuse
  • Surface area 470 to 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
Verify-AX is a mixed-mode material based on two functional groups bonded to the silica base: a reversed phase C8 group and a strong anion exchanger. Analysis of a range of acidic drugs of abuse from biological matrices, including THC and its metabolites.

HyperSep Verify AX SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
130 1 60108-727 100 Pack
130 10 60108-767 50 Pack
200 3 60108-768 30 Pack
200 6 60108-730 50 Pack
200 10 60108-764 50 Pack
300 3 60108-728 50 Pack
500 3 60108-729 50 Pack
500 6 60108-731 30 Pack
1,000 6 60108-732 30 Pack

HyperSep Verify AX 96 Fixed/Removable Well Plates

Bed Weight (mg) Column Volume (mL) Fixed Cat. No. Removable Cat. No. Quantity
10 1 60307-271 60300-813 1 Each
25 1 60307-272 60300-814 1 Each
50 1 60307-273 60300-815 1 Each
100 1 60307-274 60300-816 1 Each

Ion exchange SPE cartridges & well plates

Extraction accomplished by electrostatic interactions

Material Characteristics Typical applications
For extraction of weak acids
  • Surface area 470 to 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
Ideal for the extraction of negatively charged compounds from both aqueous and non-aqueous matrices, as well as the extraction of weak acids such as carboxylic acid. Removal of acidic food pigments, removal of phenolic compounds, nucleic acids, and surfactants.

HyperSep (SAX) Strong Anion Exchanger SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
50 1 60108-417 100 Pack
100 1 60108-418 100 Pack
200 3 60108-419 50 Pack
500 3 60108-521 50 Pack
500 6 60108-360 30 Pack
1,000 6 60108-434 30 Pack
2,000 15 60108-713 20 Pack
5,000 25 60108-714 20 Pack
10,000 75 60108-715 10 Pack

HyperSep (SAX) Strong Anion Exchanger 96 Fixed/Removable Well Plates

Bed Weight (mg) Column Volume (mL) Fixed Cat. No. Removable Cat. No. Quantity
10 1 60307-241 60300-565 1 Each
25 1 60307-242 60300-566 1 Each
50 1 60307-243 60300-567 1 Each
100 1 60307-244 60300-568 1 Each
Material Characteristics Typical applications
For extraction of charged basic compounds
  • Surface area 470 to 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
Ideal for the extraction of positively charged compounds from both aqueous and non-aqueous matrices. Extraction of:
  • Antibiotics, drugs, organic bases, amino acids, catecholamines, and herbicides

HyperSep (SCX) Strong Cation Exchanger SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
50 1 60108-420 100 Pack
100 1 60108-421 100 Pack
200 3 60108-422 50 Pack
500 3 60108-423 50 Pack
500 6 60108-520 30 Pack
1,000 6 60108-433 30 Pack
2,000 15 60108-716 20 Pack
5,000 25 60108-717 20 Pack
10,000 75 60108-718 10 Pack
20,000 75 60108-857 10 Pack
50,000 150 60108-858 10 Pack

HyperSep SCX Strong Cation Exchanger 96 Fixed/Removable Well Plates

Bed Weight (mg) Column Volume (mL) Fixed Cat. No. Removed Cat. No. Quantity
10 1 60307-251 60300-585 1 Each
25 1 60307-252 60300-586 1 Each
50 1 60307-253 60300-587 1 Each
100 1 60307-254 60300-588 1 Each

Normal phase SPE cartridges & well plates

Extraction accomplished by polar-polar interactions and dipole-dipole interactions

Material Characteristics Typical applications
A polar sorbent primarily used to retain analytes from non-polar matrices
  • Surface area 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
Silica material is primarily used to extract analytes from non-polar solvents such as hydrocarbons, less polar esters and ethers. Extraction of:
  • Aldehydes, amines, pesticides, herbicides, carotenoids, fat soluble vitamins, aflatoxins, fatty acids, and phospholipids

HyperSep Silica SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
50 1 60108-409 100 Pack
100 1 60108-317 100 Pack
200 3 60108-410 50 Pack
500 3 60108-315 50 Pack
500 6 60108-411 30 Pack
500 10 60108-793 50 Pack
1,000 6 60108-426 30 Pack
2,000 15 60108-710 20 Pack
5,000 25 60108-711 20 Pack
10,000 25 60108-853 20 Pack
10,000 75 60108-712 10 Pack
50,000 150 60108-850 10 Pack
20,000 75 60108-851 10 Pack
70,000 150 60108-852 10 Pack
1,000 3 mL 60108-441 Unknown
100 mg 10 mL 60108-503 50 Pack

HyperSep Silica 96 Fixed/Removable Well Plates

Bed Weight (mg) Column Volume (mL) Fixed Cat. No. Removed Cat. No. Quantity
10 1 60307-231 60300-485 1 Each
25 1 60307-232 60300-486 1 Each
50 1 60307-233 60300-487 1 Each
100 1 60307-234 60300-488 1 Each
Material Characteristics Typical applications
Ideal for the isolation of polar compounds from non-polar matrices
  • Surface area 289m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
Florisil is a magnesia-loaded silica gel Extraction of:
  • Pesticides using AOAC and EPA methods
  • Polychlorinated biphenyls (PCBs) in transformer oil

HyperSep Florisil SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
50 1 60108-402 100 Pack
100 1 60108-403 100 Pack
200 3 60108-404 50 Pack
500 3 60108-405 50 Pack
500 6 60108-500 30 Pack
1,000 6 60108-431 30 Pack
2,000 6 60108-758 30 Pack
2,000 15 60108-735 20 Pack
5,000 25 60108-736 20 Pack
10,000 75 60108-737 10 Pack

HyperSep Florisil 96 Fixed/Removable Well Plates

Bed Weight (mg) Column Volume (mL) Fixed Cat. No. Removable Cat. No. Quantity
10 1 60307-281 60300-725 1 Each
25 1 60307-282 60300-726 1 Each
50 1 60307-283 60300-727 1 Each
100 1 60307-284 60300-728 1 Each
Characteristics Material Typical applications
For retention of polar compounds from non-polar matrices
  • Surface area 470 to 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
  • A silica-based material of low hydrophobicity.
  • It is less retentive than either silica or diol.
  • Retention of polar compounds from hexane and oil

HyperSep Cyano SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
50 1 60108-746 100 Pack
100 1 60108-745 100 Pack
200 3 60108-747 50 Pack
500 3 60108-748 50 Pack
500 6 60108-749 30 Pack
1,000 6 60108-750 30 Pack
2,000 15 60108-751 20 Pack
5,000 25 60108-752 20 Pack
10,000 75 60108-753 10 Pack

HyperSep Cyano 96 Fixed/Removable Well Plates

Bed Weight (mg) Column Volume (mL) Fixed Cat. No. Removable Cat. No. Quantity
10 1 60307-301 60300-821 1 Each
25 1 60307-302 60300-822 1 Each
50 1 60307-303 60300-823 1 Each
100 1 60307-304 60300-824 1 Each
Characteristics Material Typical applications
  • For extraction of polar compounds
  • Surface area 470 to 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
A silica-based material Normal phase extraction and purification of polar compounds

HyperSep Diol SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
50 1 60108-571 100 Pack
100 1 60108-572 100 Pack
200 3 60108-573 50 Pack
500 3 60108-574 50 Pack
500 6 60108-575 30 Pack
1,000 6 60108-576 30 Pack
2,000 15 60108-755 20 Pack
5,000 25 60108-756 20 Pack
10,000 75 60108-757 10 Pack

HyperSep Diol 96 Fixed/Removable Well Plates

Bed Weight (mg) Column Volume (mL) Fixed Cat. No. Removable Cat. No. Quantity
10 1 60307-311 60300-630 1 Each
25 1 60307-312 60300-631 1 Each
50 1 60307-313 60300-632 1 Each
100 1 60307-314 60300-633 1 Each
Characteristics Material Typical applications
A polar sorbent for both polar and anion exchange interactions
  • Surface area 470 to 530m2/g
  • Particle size 40 to 60µm
  • Pore size 60Å
A silica-based material which can be used as both a polar sorbent and a weak anion exchanger.   Extraction of
  • Petroleum fractionation
  • Saccharides
  • Drugs and drug metabolites

HyperSep Aminopropyl (WAX) SPE Cartridges

Bed Weight (mg) Column Volume (mL) Cat. No. Quantity
50 1 60108-424 100 Pack
50 3 60108-429 50 Pack
100 1 60108-364 100 Pack
200 3 60108-425 50 Pack
500 3 60108-518 50 Pack
500 6 60108-519 30 Pack
1,000 6 60108-432 30 Pack
2,000 15 60108-738 20 Pack
5,000 75 60108-739 20 Pack
10,000 75 60108-740 10 Pack

HyperSep Aminopropyl (WAX) 96 Fixed/Removable Well Plates

Bed Weight (mg) Column Volume (mL) Fixed Cat. No. Removable Cat. No. Quantity
10 1 60307-291 60300-505 1 Each
25 1 60307-292 60300-506 1 Each
50 1 60307-293 60300-507 1 Each
100 1 60307-294 60300-508 1 Each
Material Characteristics Typical applications
Unique material for retention of highly polar compounds
  • 100% porous graphitic carbon material
  • Provides total pH stability retention and separation of highly polar species.
  • Retention properties allow use of low bed weights
Ideal for problem analytes in SPE applications.

HyperSep Hypercarb SPE Cartridges

Bed Weight (mg) Column Volume (mL) Retain AX Quantity
25 1 60106-304 50 Pack
50 1 60106-303 50 Pack
100 1 60106-302 30 Pack
200 3 60106-301 30 Pack
500 6 60106-402 20 Pack
1,000 6 60106-403 20 Pack
2,000 15 60106-404 10 Pack

HyperSep Hypercarb 96 Fixed Well Plates

Bed Weight (mg) Well Volume (mL) Fixed Plate Removable Plate Quantity
10 1 60306-501 60302-606 1 Each
25 1 60306-502 60302-607 1 Each
50 1 60306-503 60302-608 1 Each

SPE selector chart

SPE Stationary Phase Selection
High-throughput SPE. Low-volume samples. Great extraction!

High-throughput SPE. Low-volume samples. Great extraction!

For bioanalysis applications, use SOLA & SOLAμ SPE Cartridges and Plates. This latest innovation in SPE addresses the extraction requirements you need for fast, efficient extraction of biological samples.

Demonstration: How to perform solid phase extraction

New to SPE? Watch this video to see a benchtop demonstration of the SPE workflow. This example uses the HyperSep Verify CX SPE cartridge to extract compounds from urine for subsequent gas chromatography analysis.